Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing

被引：1099

作者：

King, Wayne E. ^{[1
]}

Barth, Holly D. ^{[2
]}

Castillo, Victor M. ^{[2
]}

Gallegos, Gilbert F. ^{[2
]}

Gibbs, John W. ^{[1
,3
]}

Hahn, Douglas E. ^{[2
]}

Kamath, Chandrika ^{[4
]}

Rubenchik, Alexander M. ^{[5
,6
]}

机构：

[1] Lawrence Livermore Natl Lab, Phys & Life Sci Directorate, Livermore, CA 94550 USA

[2] Lawrence Livermore Natl Lab, Engn Directorate, Livermore, CA 94550 USA

[3] Northwestern Univ, Dept Mat Sci & Engn, Evanston, IL 60208 USA

[4] Lawrence Livermore Natl Lab, Computat Directorate, Livermore, CA 94550 USA

[5] Lawrence Livermore Natl Lab, NIF, Livermore, CA 94550 USA

[6] Lawrence Livermore Natl Lab, Photon Sci Directorate, Livermore, CA 94550 USA

来源：

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY | 2014年 / 214卷 / 12期

关键词：

Keyhole-mode laser melting; Additive manufacturing; Powder-bed fusion; Selective laser sintering; Selective laser melting; Direct metal laser sintering; STAINLESS-STEEL;

D O I：

10.1016/j.jmatprotec.2014.06.005

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Laser powder-bed fusion additive manufacturing of metals employs high-power focused laser beams. Typically, the depth of the molten pool is controlled by conduction of heat in the underlying solid material. But, under certain conditions, the mechanism of melting can change from conduction to so-called "keyhole-mode" laser melting. In this mode, the depth of the molten pool is controlled by evaporation of the metal. Keyhole-mode laser melting results in melt pool depths that can be much deeper than observed in conduction mode. In addition, the collapse of the vapor cavity that is formed by the evaporation of the metal can result in a trail of voids in the wake of the laser beam. In this paper, the experimental observation of keyhole-mode laser melting in a laser powder-bed fusion additive manufacturing setting for 316L stainless steel is presented. The conditions required to transition from conduction controlled melting to keyhole-mode melting are identified. (c) 2014 Elsevier B.V. All rights reserved.

引用

页码：2915 / 2925

页数：11

共 50 条

[41] Pulsed laser powder bed fusion additive manufacturing of A356
Chou, S. C.
Trask, M.
Danovitch, J.
Wang, X. L.
Choi, J. P.
Brochu, M.
MATERIALS CHARACTERIZATION, 2018, 143 : 27 - 33
[42] Gold plating of AlSi10Mg parts produced by a laser powder-bed fusion additive manufacturing technique
Inberg, Alexandra
Ashkenazi, Dana
Kimmel, Giora
Shacham-Diamand, Yosi
Stern, Adin
PROGRESS IN ADDITIVE MANUFACTURING, 2020, 5 (04) : 395 - 404
[43] A novel thermo-geometrical model for accurate keyhole porosity prediction in Laser Powder-Bed Fusion
Vaglio, Emanuele
Totis, Giovanni
Lanzutti, Alex
Fedrizzi, Lorenzo
Sortino, Marco
PROGRESS IN ADDITIVE MANUFACTURING, 2024, 9 (02) : 247 - 261
[44] A novel thermo-geometrical model for accurate keyhole porosity prediction in Laser Powder-Bed Fusion
Emanuele Vaglio
Giovanni Totis
Alex Lanzutti
Lorenzo Fedrizzi
Marco Sortino
Progress in Additive Manufacturing, 2024, 9 : 247 - 261
[45] An Extended Rosenthal’s Model for Laser Powder-Bed Fusion Additive Manufacturing: Energy Auditing of Thermal Boundary Conditions
Imani Shahabad S.
Karimi G.
Toyserkani E.
Lasers in Manufacturing and Materials Processing, 2021, 8 (03) : 288 - 311
[46] Gold plating of AlSi10Mg parts produced by a laser powder-bed fusion additive manufacturing technique
Alexandra Inberg
Dana Ashkenazi
Giora Kimmel
Yosi Shacham-Diamand
Adin Stern
Progress in Additive Manufacturing, 2020, 5 : 395 - 404
[47] Detection of keyhole pore formations in laser powder-bed fusion using acoustic process monitoring measurements
Tempelman, Joshua R.
Wachtor, Adam J.
Flynn, Eric B.
Depond, Phillip J.
Forien, Jean-Baptiste
Guss, Gabe M.
Calta, Nicholas P.
Matthews, Manyalibo J.
ADDITIVE MANUFACTURING, 2022, 55
[48] On the effect of spatter particles distribution on the quality of Hastelloy X parts made by laser powder-bed fusion additive manufacturing
Esmaeilizadeh, Reza
Ali, Usman
Keshavarzkermani, Ali
Mahmoodkhani, Yahya
Marzbanrad, Ehsan
Toyserkani, Ehsan
JOURNAL OF MANUFACTURING PROCESSES, 2019, 37 : 11 - 20
[49] Influence of keyhole and conduction mode melting for top-hat shaped beam profiles in laser powder bed fusion
Tenbrock, Christian
Fischer, Felix Gabriel
Wissenbach, Konrad
Schleifenbaum, Johannes Henrich
Wagenblast, Philipp
Meiners, Wilhelm
Wagner, Joachim
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2020, 278
[50] Influences of Powder Packing Density in Laser Powder Bed Fusion Metal Additive Manufacturing
Zhang Peng
Zhang Shaoming
Bi Zhongnan
Tan Zhen
Wang Rui
Wang Rui
LASER & OPTOELECTRONICS PROGRESS, 2024, 61 (05)

← 1 2 3 4 5 →