Grinding System Reducing the Influence of Thermal Deformation of Workpiece in Cylindrical Grinding

被引：2
|
作者：
Onishi, Takashi [1 ]
Sakakura, Moriaki [2 ]
Sato, Naoki [1 ]
Kodani, Takuya [1 ]
Ohashi, Kazuhito [1 ]
Tsukamoto, Shinya [1 ]
机构：
[1] Okayama Univ, Kita Ku, 3-1-1 Tsusima Naka, Okayama 7008530, Japan
[2] Daido Univ, Nagoya, Aichi 4578530, Japan
来源：
ADVANCES IN ABRASIVE TECHNOLOGY XVI | 2013年 / 797卷
关键词：
Cylindrical grinding; Thermal deformation; Dimensional error; Prediction of thermal deformation; In-process measurement;
D O I：
10.4028/www.scientific.net/AMR.797.609
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In cylindrical grinding, a sizing device is generally used to obtain the required dimension. However, the dimensional error can be caused by the thermal deformation of the workpiece even if grinding machine is controlled with the sizing device. To solve this problem, it is necessary to develop the grinding system that can consider the thermal deformation of the workpiece during grinding process. In this study, an advanced grinding system was developed, which can predict the net stock removal of ground workpiece immediately. The grinding experiment is carried out to verify the developed system.
引用
收藏
页码：609 / +
页数：2
相关论文
共 50 条
  • [41] The study on a simulation model of workpiece surface topography in external cylindrical grinding
    Chi, Jun
    Guo, Jianliang
    Chen, Lianqiang
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2016, 82 (5-8): : 939 - 950
  • [42] A Study on Workpiece Coordinate System Correction for Robot Grinding
    Wu, Xiang-yang
    Huang, Xing-bo
    Zhang, Wei-hua
    Lv, Liang
    2015 INTERNATIONAL CONFERENCE ON APPLIED MECHANICS AND MECHATRONICS ENGINEERING (AMME 2015), 2015, : 129 - 134
  • [43] Influence of Grinding Parameters on the Depth and Uniformity of Cylindrical Grinding-Hardened Layer
    Liu, Judong
    Zhuang, Jiezhen
    Zhang, Xilin
    Xu, Zhilong
    DIGITAL DESIGN AND MANUFACTURING TECHNOLOGY, PTS 1 AND 2, 2010, 102-104 : 733 - +
  • [44] ANALYSIS OF WORKPIECE TEMPERATURE AND GRINDING BURN IN CREEP FEED GRINDING
    OHISHI, S
    FURUKAWA, Y
    BULLETIN OF THE JSME-JAPAN SOCIETY OF MECHANICAL ENGINEERS, 1985, 28 (242): : 1775 - 1781
  • [45] Mechanism of workpiece removal in grinding
    Okuyama, Shigeki
    Toraibarojisuto/Journal of Japanese Society of Tribologists, 2018, 63 (03): : 139 - 144
  • [46] Computer simulations of cylindrical plunge grinding - Influence of work stiffness on grinding accuracy
    Horiuchi, O.
    Shibata, T.
    Key Engineering Materials, 2007, 329 : 51 - 56
  • [47] Investigation of the effect of speed ratio on workpiece surface topography and grinding power in cylindrical plunge grinding using grooved and non-grooved grinding wheels
    A. Patel
    R. J. Bauer
    A. Warkentin
    The International Journal of Advanced Manufacturing Technology, 2019, 105 : 2977 - 2987
  • [48] Numerical investigation of transient thermal stresses of workpiece in surface grinding
    Natl Tsing Hua Univ, Hsinchu, Taiwan
    J Therm Stresses, 6 (565-578):
  • [49] Numerical investigation of transient thermal stresses of workpiece in surface grinding
    Tsai, HH
    Hocheng, H
    JOURNAL OF THERMAL STRESSES, 1996, 19 (06) : 565 - 578
  • [50] Investigation of the effect of speed ratio on workpiece surface topography and grinding power in cylindrical plunge grinding using grooved and non-grooved grinding wheels
    Patel, A.
    Bauer, R. J.
    Warkentin, A.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2019, 105 (7-8): : 2977 - 2987
12345