Computer simulations of cylindrical plunge grinding - Influence of work stiffness on grinding accuracy

被引：0
|
作者：
Horiuchi, O. [1 ]
Shibata, T. [1 ]
机构：
[1] Department of Production Systems Engineering, Toyohashi University of Technology, 1-1 Hibarigaoka, Tempaku, Toyohashi, Aichi, 441-8580, Japan
来源：
Key Engineering Materials | 2007年 / 329卷
关键词：
Computer simulation - Error analysis - Stiffness;
D O I：
10.4028/0-87849-416-2.51
中图分类号：
学科分类号：
摘要：
This paper describes influence of work stiffness on grinding accuracy investigated by computer simulations of grinding process for cylindrical plunge grinding. The reliability of simulation program was demonstrated by identification with experimental results. Then, effects of various error causes on grinding accuracy were investigated for different work stiffness. Accuracy of the ground surface is affected in different manners by different error causes. Therefore it is not always true that higher stiffness results in higher accuracy.
引用
收藏
页码：51 / 56
相关论文
共 50 条
  • [1] THE PREDICTION OF GRINDING FORCES IN CYLINDRICAL PLUNGE GRINDING
    FIELDING, ER
    VICKERSTAFF, TJ
    INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, 1986, 24 (01) : 167 - 186
  • [2] The Effect of Grinding Wheel Contact Stiffness on Plunge Grinding Cycle
    Hashimoto, Fukuo
    Iwashita, Hiroto
    INVENTIONS, 2020, 5 (04) : 1 - 28
  • [3] An apparatus to facilitate plunge cylindrical grinding
    Scott, W
    ABRASIVE TECHNOLOGY: CURRENT DEVELOPMENT AND APPLICATIONS I, 1999, : 109 - 115
  • [4] REGENERATIVE CHATTER IN CYLINDRICAL PLUNGE GRINDING
    INASAKI, I
    TONOU, K
    YONETSU, S
    BULLETIN OF THE JSME-JAPAN SOCIETY OF MECHANICAL ENGINEERS, 1977, 20 (150): : 1648 - 1654
  • [5] Analysis of a cylindrical plunge grinding process (the contact rigidity of the grinding wheel)
    Obi, Makoto
    Kumagaya, Shunji
    Yasuhara, Kazuhiko
    Iwasato, Shigeru
    Nippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, 1989, 55 (510): : 451 - 454
  • [6] Understanding the Temperature Field in Plunge Cylindrical Grinding for Grinding-Hardening
    Nguyen, T.
    Zhang, L. C.
    ADVANCES IN MATERIALS PROCESSING IX, 2010, 443 : 388 - 393
  • [7] Influence of Dynamic Displacement of the Machining System on the Accuracy of Plunge Grinding
    Akintseva A.V.
    Almavash A.M.
    Pereverzev P.P.
    Prokhorov A.V.
    Russian Engineering Research, 2021, 41 (10) : 957 - 961
  • [8] ON ROUNDNESS OF WORKPIECE GENERATED BY CYLINDRICAL PLUNGE GRINDING
    INOUE, H
    WAIDA, T
    NOGUCHI, H
    JOURNAL OF MECHANICAL ENGINEERING LABORATORY, 1980, 34 (06): : 289 - 301
  • [9] A STUDY ON THE CORNER WEAR IN CYLINDRICAL PLUNGE GRINDING
    ACHYUTHA, BT
    RADHAKRISHNAN, V
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 1985, 25 (04): : 287 - 297
  • [10] Effects of stiffness and damping coefficients of the spindle bearing on the dynamics of the cylindrical plunge grinding process
    Ahn, Y
    Kim, DH
    Choi, SH
    Han, DC
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2001, 215 (12) : 1711 - 1718
12345