Computer simulations of cylindrical plunge grinding - Influence of work stiffness on grinding accuracy

被引：0
|
作者：
Horiuchi, O. [1 ]
Shibata, T. [1 ]
机构：
[1] Department of Production Systems Engineering, Toyohashi University of Technology, 1-1 Hibarigaoka, Tempaku, Toyohashi, Aichi, 441-8580, Japan
来源：
Key Engineering Materials | 2007年 / 329卷
关键词：
Computer simulation - Error analysis - Stiffness;
D O I：
10.4028/0-87849-416-2.51
中图分类号：
学科分类号：
摘要：
This paper describes influence of work stiffness on grinding accuracy investigated by computer simulations of grinding process for cylindrical plunge grinding. The reliability of simulation program was demonstrated by identification with experimental results. Then, effects of various error causes on grinding accuracy were investigated for different work stiffness. Accuracy of the ground surface is affected in different manners by different error causes. Therefore it is not always true that higher stiffness results in higher accuracy.
引用
收藏
页码：51 / 56
相关论文
共 50 条
  • [31] Optimal Control of Cylindrical Plunge Grinding Using Dynamic Programming
    Choi, Jeongju
    JOURNAL OF ADVANCED MECHANICAL DESIGN SYSTEMS AND MANUFACTURING, 2012, 6 (05): : 581 - 589
  • [32] SURFACE SENSORS FOR ROUGHNESS MEASUREMENT DURING CYLINDRICAL PLUNGE GRINDING
    DUTSCHKE, W
    KIESSLING, WD
    RAU, N
    WERKSTATTSTECHNIK ZEITSCHRIFT FUR INDUSTRIELLE FERTIGUNG, 1975, 65 (11): : 697 - 703
  • [33] Numerical analysis for thermal deformation of workpiece in cylindrical plunge grinding
    Hasegawa, Hiroyuki
    Sakakura, Moriaki
    Tsukamoto, Shinya
    ADVANCES IN ABRASIVE TECHNOLOGY XI, 2009, 389-390 : 114 - +
  • [34] Bautin Bifurcation Induced Nonlinear Chatter in Cylindrical Plunge Grinding
    Yan, Yao
    Xu, Jian
    Wang, Wanyong
    DYNAMICS FOR SUSTAINABLE ENGINEERING, VOL 1, 2011, : 375 - 384
  • [35] Numerical analysis for thermal deformation of workpiece in cylindrical plunge grinding
    Hasegawa, Hiroyuki
    Suritalatu
    Sakakura, Moriaki
    Tsukamoto, Shinya
    Key Engineering Materials, 2009, 389-390 : 114 - 119
  • [36] Cylindrical plunge grinding of twist free surfaces by structured wheels
    Daneshi, Amir
    Mueller, Konstantin
    Azarhoushang, Bahman
    PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 2018, 51 : 481 - 489
  • [37] THE ANALYSIS OF A CYLINDRICAL PLUNGE GRINDING PROCESS - (THE PERIODICAL CHANGE OF WORK REVOLUTION AND THE DEVIATION FROM CIRCULARITY)
    OBI, M
    IWASATO, S
    JSME INTERNATIONAL JOURNAL SERIES III-VIBRATION CONTROL ENGINEERING ENGINEERING FOR INDUSTRY, 1988, 31 (03): : 634 - 638
  • [38] Correlating surface roughness and vibration on plunge cylindrical grinding of steel
    Hassui, A
    Diniz, AE
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2003, 43 (08): : 855 - 862
  • [39] A simplified methodology to determine the cutting stiffness and the contact stiffness in the plunge grinding process
    Ramos, JC
    Vinolas, J
    Nieto, FJ
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2001, 41 (01): : 33 - 49
  • [40] Effect of grinding-induced cyclic heating on the hardened layer generation in the plunge grinding of a cylindrical component
    Liu, Mei
    Thai Nguyen
    Zhang, Liangchi
    Wu, Qiong
    Sun, Dale
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2015, 89 : 55 - 63
12345