The Influence of Ball Burnishing on Friction in Lubricated Sliding

被引：13

作者：

Swirad, Slawomir ^{[1
]}

Pawlus, Pawel ^{[1
]}

机构：

[1] Rzeszow Univ Technol, Fac Mech Engn & Aeronaut, Powstancow Warszawy 8 St, PL-35959 Rzeszow, Poland

来源：

MATERIALS | 2020年 / 13卷 / 21期

关键词：

ball burnishing; coefficient of friction; surface topography; SURFACE-ROUGHNESS; WEAR-RESISTANCE; IMPROVEMENT; PARAMETERS; TOPOGRAPHY; HARDNESS; QUALITY; STATE;

D O I：

10.3390/ma13215027

中图分类号：

O64 [物理化学（理论化学）、化学物理学];

学科分类号：

070304 ; 081704 ;

摘要：

Ball burnishing treatment, using the Ecoroll system, of steel samples was conducted. In the experiment, the burnishing pressure was changed. After the treatments, measurements of the surface topographies of disc samples were conducted using a white light interferometer Talysurf CCI Lite. Tribological tests were carried out in a ball-on-disc configuration. After these tests, measurements of surface topographies of disc samples were repeated. Worn surfaces were also analyzed with a scanning electron microscope. It was found that as the result of burnishing, surface topography height of tested samples decreased. Ball burnishing led to a reduction in the frictional resistance. The highest friction reduction of more than 40% was achieved with a burnishing pressure of 20 MPa.

引用

页码：1 / 14

页数：14

共 50 条

[31] SLIDING FRICTION OF BALL BEARINGS OF THE PIVOT TYPE
PORITSKY, H
HEWLETT, CW
COLEMAN, RE
JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME, 1947, 14 (04): : A261 - A268
[32] SLIDING FRICTION OF BALL BEARINGS OF THE PIVOT TYPE
ANDERSON, WD
PORITSKY, H
HEWLETT, CW
BARISH, T
JONES, AB
MACINTYRE, JR
LYNCH, EE
RULEY, B
JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME, 1948, 15 (02): : 181 - 185
[33] Friction and wear of water lubricated PEEK and PPS sliding contacts
Yamamoto, Y
Takashima, T
WEAR, 2002, 253 (7-8) : 820 - 826
[34] FRICTION AT A LUBRICATED LINE CONTACT OPERATING AT OSCILLATING SLIDING VELOCITIES
HESS, DP
SOOM, A
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 1990, 112 (01): : 147 - 152
[35] Friction models for sliding dry, boundary and mixed lubricated contacts
Andersson, Soren
Soderberg, Anders
Bjorklund, Stefan
TRIBOLOGY INTERNATIONAL, 2007, 40 (04) : 580 - 587
[36] A Computer Model for Sliding Friction in lubricated-point Contacts
Wang, Shun
Hu, Yuan-zhong
Feng, Zeng-ming
PROCEEDINGS OF THE SECOND INTERNATIONAL CONFERENCE ON MODELLING AND SIMULATION (ICMS2009), VOL 6, 2009, : 334 - 340
[37] FRICTION AND WEAR OF SOME BRONZES UNDER LUBRICATED RECIPROCATING SLIDING
MONTGOMERY, RS
WEAR, 1970, 15 (05) : 373 - +
[38] Friction at a lubricated line contact operating at oscillating sliding velocities
Hess, D.P.
Soom, A.
1600, (112):
[39] Evaluation of optimized surface characteristics in non-rotational sliding ball burnishing
Roohi, Hossein
Baseri, Hamid
Mirnia, Mohammad Javad
MATERIALS AND MANUFACTURING PROCESSES, 2024, 39 (16) : 2299 - 2308
[40] INFLUENCE OF RUNNING-IN ON THE RESISTANCE TO SEIZURE OF LUBRICATED ROUGH SURFACES WITH COMBINED ROLLING AND SLIDING FRICTION.
Vitenberg, Yu.R.
Petrusevich, A.I.
Russian Engineering Journal (English translation of Vestnik Mashinostroeniya), 1976, 56 (06): : 11 - 15

← 1 2 3 4 5 →