The Influence of Ball Burnishing on Friction in Lubricated Sliding

被引：13
|
作者：
Swirad, Slawomir [1 ]
Pawlus, Pawel [1 ]
机构：
[1] Rzeszow Univ Technol, Fac Mech Engn & Aeronaut, Powstancow Warszawy 8 St, PL-35959 Rzeszow, Poland
来源：
MATERIALS | 2020年 / 13卷 / 21期
关键词：
ball burnishing; coefficient of friction; surface topography; SURFACE-ROUGHNESS; WEAR-RESISTANCE; IMPROVEMENT; PARAMETERS; TOPOGRAPHY; HARDNESS; QUALITY; STATE;
D O I：
10.3390/ma13215027
中图分类号：
O64 [物理化学（理论化学）、化学物理学];
学科分类号：
070304 ; 081704 ;
摘要：
Ball burnishing treatment, using the Ecoroll system, of steel samples was conducted. In the experiment, the burnishing pressure was changed. After the treatments, measurements of the surface topographies of disc samples were conducted using a white light interferometer Talysurf CCI Lite. Tribological tests were carried out in a ball-on-disc configuration. After these tests, measurements of surface topographies of disc samples were repeated. Worn surfaces were also analyzed with a scanning electron microscope. It was found that as the result of burnishing, surface topography height of tested samples decreased. Ball burnishing led to a reduction in the frictional resistance. The highest friction reduction of more than 40% was achieved with a burnishing pressure of 20 MPa.
引用
收藏
页码：1 / 14
页数：14
相关论文
共 50 条
  • [21] FRICTION POWER AS A CRITERION OF SEIZURE WITH SLIDING LUBRICATED CONTACT
    MATVEEVSKY, RM
    WEAR, 1992, 155 (01) : 1 - 5
  • [22] SLIDING FRICTION OF LUBRICATED POINT CONTACT COATED WITH PTFE
    Zhang, Yongbin
    JOURNAL OF THE BALKAN TRIBOLOGICAL ASSOCIATION, 2013, 19 (03): : 426 - 432
  • [23] Friction and wear of sand-contaminated lubricated sliding
    Mohamed Ahmed Ramadan
    Friction, 2018, 6 : 457 - 463
  • [24] Friction and wear of sand-contaminated lubricated sliding
    Mohamed Ahmed RAMADAN
    Friction, 2018, 6 (04) : 457 - 463
  • [25] Critique of the friction coefficient concept for wet (lubricated) sliding
    Dhinojwala, A
    Cai, L
    Granick, S
    LANGMUIR, 1996, 12 (19) : 4537 - 4542
  • [26] Friction and wear of sand-contaminated lubricated sliding
    Ramadan, Mohamed Ahmed
    FRICTION, 2018, 6 (04) : 457 - 463
  • [27] Influence of the cage on the friction torque in low loaded thrust ball bearings operating in lubricated conditions
    Olaru, Dumitru N.
    Balan, Mihaela Rodica D.
    Tufescu, Ana
    Carlescu, Vlad
    Prisacaru, Gheorghe
    TRIBOLOGY INTERNATIONAL, 2017, 107 : 294 - 305
  • [28] INFLUENCE OF RUNNING-IN ON RESISTANCE TO SEIZURE OF LUBRICATED ROUGH SURFACES WITH COMBINED ROLLING AND SLIDING FRICTION
    VITENBERG, YR
    PETRUSEVICH, AI
    RUSSIAN ENGINEERING JOURNAL, 1976, 56 (06): : 11 - 13
  • [29] Friction analysis of thermally sprayed coatings finished by ball burnishing and grinding
    Tekkaya A.E.
    Kleiner M.
    Biermann D.
    Hiegemann L.
    Rausch S.
    Franzen V.
    Kwiatkowski L.
    Kersting P.
    Hiegemann, L. (lars.hiegemann@iul.tu-dortmund.de), 1600, Springer Verlag (07): : 601 - 610
  • [30] Friction and wear in thrust ball bearings lubricated with biodegradable greases
    Cousseau, T.
    Graca, B.
    Campos, A.
    Seabra, J.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2011, 225 (J7) : 627 - 639
12345