Microstructure and impact behaviour of ASTM A105/AISI 304L friction weldments

被引：4
|
作者：
Straffelini, G [1 ]
Pellizzari, M
Bernardi, N
机构：
[1] Univ Trent, Dipartimento Ingn Mat & Tecnol Ind, I-38100 Trent, Italy
[2] Tomet SpA, Vicenza, Italy
来源：
MATERIALS SCIENCE AND TECHNOLOGY | 2004年 / 20卷 / 05期
关键词：
friction welds; carbon steels; stainless steels; microstructure; impact strength;
D O I：
10.1179/026708304225016699
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Instrumented impact testing has been used to investigate the influence of the microstructure of the heat affected zone (HAZ) on the impact fracture behaviour of ASTM A105/AISI 304L friction weldments. The friction layer in the HAZ has been found to consist of two different parts. In the A105 side, a mechanically mixed layer made of bainite containing 304L `protrusions' is present. The hardness of the bainite was found to increase as the friction pressure was decreased. In the 304L side, the friction layer was made of a thick shear band, formed by thermoplastic instability during welding. The impact fracture toughness was found to depend on both the crack nucleation and propagation stages, whose characteristics were related to the dynamic fracture toughness of the friction layers.
引用
收藏
页码：634 / 640
页数：7
相关论文
共 50 条
  • [41] Abnormal grain growth in AISI 304L stainless steel
    Shirdel, M.
    Mirzadeh, H.
    Parsa, M. H.
    MATERIALS CHARACTERIZATION, 2014, 97 : 11 - 17
  • [42] Effect of ultrafine-grained microstructure on creep behaviour in 304L austenitic steel
    Kral, Petr
    Dvorak, Jiri
    Sklenicka, Vaclav
    Horita, Zenji
    Takizawa, Yoichi
    Tang, Yongpeng
    Kvapilova, Marie
    Svobodova, Marie
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020, 785
  • [43] Microstructure anomaly during welding and its influence on the mechanical properties of dissimilar weldments of P92 martensitic steel and AISI 304L austenitic stainless steel
    Dak, Gaurav
    Pandey, Chandan
    JOURNAL OF MANUFACTURING PROCESSES, 2022, 80 : 829 - 851
  • [44] Microstructure and mechanical properties of functionally graded materials alloy 82 / AISI 304L by employing WAAM
    Muthu, S. M.
    Prabu, S. Senthur
    Sujai, S.
    Sebastian, Julia
    Liyakat, Nafeez Ahmed
    MATERIALS TODAY COMMUNICATIONS, 2025, 42
  • [45] Segregation effects on the corrosion behaviour of a phosphorus-doped AISI type 304L stainless steel
    Muraleedharan, P
    Schneider, F
    Mummert, K
    JOURNAL OF NUCLEAR MATERIALS, 1999, 270 (03) : 342 - 348
  • [46] Corrosion behaviour of amorphous Ni-Si thin films on AISI 304L stainless steel
    Tam, P. L.
    Jelvestam, U.
    Nyborg, L.
    MATERIALS AT HIGH TEMPERATURES, 2009, 26 (02) : 177 - 186
  • [47] Impact energy absorption of aluminium foam fitted AISI 304L stainless steel tube
    Rajendran, R.
    Sai, K. Prem
    Chandrasekar, B.
    Gokhale, A.
    Basu, S.
    MATERIALS & DESIGN, 2009, 30 (05) : 1777 - 1784
  • [48] Impact of the microstructure and surface finishing on the ductility response of AISI type 304L steel tested in high pressure hydrogen gas atmosphere
    Martin, Mauro
    Theisen, Wener
    INTERNATIONAL CONGRESS OF SCIENCE AND TECHNOLOGY OF METALLURGY AND MATERIALS, SAM - CONAMET 2014, 2015, 9 : 396 - 403
  • [49] Microstructure Evolution in 304L Stainless Steel Cladding Produced by Additive Friction Stir Deposition
    B. E. T. Roper
    C. M. Roper
    H. M. Rao
    L. N. Brewer
    V. K. Vasudevan
    N. Zhu
    J. B. Jordon
    P. G. Allison
    Metallography, Microstructure, and Analysis, 2024, 13 : 174 - 180
  • [50] Microstructure Evolution in 304L Stainless Steel Cladding Produced by Additive Friction Stir Deposition
    Roper, B. E. T.
    Roper, C. M.
    Rao, H. M.
    Brewer, L. N.
    Vasudevan, V. K.
    Zhu, N.
    Jordon, J. B.
    Allison, P. G.
    METALLOGRAPHY MICROSTRUCTURE AND ANALYSIS, 2024, 13 (01) : 174 - 180
12345