Microstructure and impact behaviour of ASTM A105/AISI 304L friction weldments

被引：4
|
作者：
Straffelini, G [1 ]
Pellizzari, M
Bernardi, N
机构：
[1] Univ Trent, Dipartimento Ingn Mat & Tecnol Ind, I-38100 Trent, Italy
[2] Tomet SpA, Vicenza, Italy
来源：
MATERIALS SCIENCE AND TECHNOLOGY | 2004年 / 20卷 / 05期
关键词：
friction welds; carbon steels; stainless steels; microstructure; impact strength;
D O I：
10.1179/026708304225016699
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Instrumented impact testing has been used to investigate the influence of the microstructure of the heat affected zone (HAZ) on the impact fracture behaviour of ASTM A105/AISI 304L friction weldments. The friction layer in the HAZ has been found to consist of two different parts. In the A105 side, a mechanically mixed layer made of bainite containing 304L `protrusions' is present. The hardness of the bainite was found to increase as the friction pressure was decreased. In the 304L side, the friction layer was made of a thick shear band, formed by thermoplastic instability during welding. The impact fracture toughness was found to depend on both the crack nucleation and propagation stages, whose characteristics were related to the dynamic fracture toughness of the friction layers.
引用
收藏
页码：634 / 640
页数：7
相关论文
共 50 条
  • [31] Microstructure and corrosion behavior of friction-surfaced 304L austenitic stainless steels
    Agiwal, Hemant
    Sridharan, Kumar
    Pfefferkorn, Frank E.
    Yeom, Hwasung
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2022, 122 (3-4): : 1641 - 1649
  • [32] Effect of rotational speed on the interface properties of friction-welded AISI 304L to 4340 steel
    Ozdemir, N.
    Sarsilmaz, F.
    Hascalik, A.
    MATERIALS & DESIGN, 2007, 28 (01): : 301 - 307
  • [33] Effect of repeated weld-repairs on microstructure, texture, impact properties and corrosion properties of AISI 304L stainless steel
    Lin, Chun-Ming
    Tsai, Hsien-Lung
    Cheng, Chun-Der
    Yang, Cheng
    ENGINEERING FAILURE ANALYSIS, 2012, 21 : 9 - 20
  • [34] TRANSMISSION ELECTRON MICROSCOPY OF TYPE 304L STAINLESS STEEL WELDMENTS
    DOWNS, GL
    WELDING JOURNAL, 1969, 48 (10) : S469 - &
  • [35] The microstructure of the base oxide on 304L steel
    Tang, JE
    Halvarsson, M
    Asteman, H
    Svensson, JE
    MICRON, 2001, 32 (08) : 799 - 805
  • [36] Characterization of Microstructure and Mechanical Properties of Inconel 625 and AISI 304 Dissimilar Weldments
    Ramkumar, Kasinath Devendranath
    Mithilesh, Parvateneni
    Varun, Digumarthi
    Reddy, Ajay Reddy Gopi
    Arivazhagan, Natarajan
    Narayanan, Sockalingam
    Kumar, Kesavan Gokul
    ISIJ INTERNATIONAL, 2014, 54 (04) : 900 - 908
  • [37] A STUDY ON CREVICE CORROSION OF AISI 316L, AISI 304L AND AISI 444 STAINLESS STEELS
    Bellezze, T.
    Quaranta, A.
    Roventi, G.
    Fratesi, R.
    METALLURGIA ITALIANA, 2008, (01): : 7 - 11
  • [38] Effect of heat input on the microstructure, residual stresses and corrosion resistance of 304L austenitic stainless steel weldments
    Unnikrishnan, Rahul
    Idury, K. S. N. Satish
    Ismail, T. P.
    Bhadauria, Alok
    Shekhawat, S. K.
    Khatirkar, Rajesh K.
    Sapate, Sanjay G.
    MATERIALS CHARACTERIZATION, 2014, 93 : 10 - 23
  • [39] A Review on Welding of AISI 304L Austenitic Stainless Steel
    Prasad, Kondapalli Siva
    Rao, Chalamalasetti Srinivasa
    Rao, Damera Nageswara
    JOURNAL FOR MANUFACTURING SCIENCE AND PRODUCTION, 2014, 14 (01) : 1 - 11
  • [40] Ferromagnetic properties of cold rolled AISI 304L steel
    Tavares, SSM
    da Silva, MR
    Neto, JM
    Miraglia, S
    Fruchart, D
    JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 2002, 242 : 1391 - 1394
12345