Selective laser melting of AlSi10 Mg: Influence of process parameters on Mg2Si precipitation and Si spheroidization

被引：70
|
作者：
Biffi, C. A. [1 ]
Fiocchi, J. [1 ]
Tuissi, A. [1 ]
机构：
[1] CNR, Inst Condensed Matter Chem & Technol Energy, Unit Lecco, CNR ICMATE, Via Previati 1E, I-23900 Lecce, Italy
来源：
JOURNAL OF ALLOYS AND COMPOUNDS | 2018年 / 755卷
关键词：
Selective laser melting; Additive manufacturing; AlSi10; Mg; Thermal analysis; Microstructure; ALUMINUM-ALLOY; MECHANICAL-PROPERTIES; MELTED ALSI10MG; MICROSTRUCTURE; POWDER; ROUGHNESS; PRODUCTS; PROPERTY; STRENGTH; BEHAVIOR;
D O I：
10.1016/j.jallcom.2018.04.298
中图分类号：
O64 [物理化学（理论化学）、化学物理学];
学科分类号：
070304 ; 081704 ;
摘要：
In Selective Laser Melting (SLM) both structural and functional properties of built parts are drastically affected by the process parameters, such as laser beam power, exposure time and building platform temperature. The effect of the mentioned parameters on the microstructure evolution and mechanical properties of AlSi10 Mg SLM builts were investigated. It was found that chemical composition, melting point and phases morphology were not varied. On the contrary, thermal analysis indicated that Mg2Si precipitation as well as Si spheroidization phenomena were slightly affected by laser energy density. This effect becomes relevant for choosing the right thermal treatments required for mechanical property optimization of SLM built Al alloy components. (C) 2018 Elsevier B.V. All rights reserved.
引用
收藏
页码：100 / 107
页数：8
相关论文
共 50 条
  • [31] Fabrication parameters for optimized thermoelectric Mg2Si
    J. de Boor
    C. Compere
    T. Dasgupta
    C. Stiewe
    H. Kolb
    A. Schmitz
    E. Mueller
    Journal of Materials Science, 2014, 49 : 3196 - 3204
  • [32] Fabrication parameters for optimized thermoelectric Mg2Si
    de Boor, J.
    Compere, C.
    Dasgupta, T.
    Stiewe, C.
    Kolb, H.
    Schmitz, A.
    Mueller, E.
    JOURNAL OF MATERIALS SCIENCE, 2014, 49 (08) : 3196 - 3204
  • [33] The influence of calcium on the primary Mg2Si phase in the hypereutectic Mg-Si alloys
    Rzychoń, Tomasz
    Janik, Radoslaw
    Solid State Phenomena, 2015, 229 : 71 - 76
  • [34] On the Precipitation Hardening of Selective Laser Melted AlSi10Mg
    Nesma T. Aboulkhair
    Chris Tuck
    Ian Ashcroft
    Ian Maskery
    Nicola M. Everitt
    Metallurgical and Materials Transactions A, 2015, 46 : 3337 - 3341
  • [35] On the Precipitation Hardening of Selective Laser Melted AlSi10Mg
    Aboulkhair, Nesma T.
    Tuck, Chris
    Ashcroft, Ian
    Maskery, Ian
    Everitt, Nicola M.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2015, 46A (08): : 3337 - 3341
  • [36] A precipitation-hardened AlSi10Mg alloy fabricated using selective laser melting
    Ahn, Soung Yeoul
    Moon, Jongun
    Choi, Yeon Taek
    Kim, Eun Seong
    Jeong, Sang Guk
    Park, Jeong Min
    Kang, Mungu
    Joo, Hyomoon
    Kim, Hyoung Seop
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2022, 844
  • [37] Modification of Mg2Si in Mg-Si alloys with neodymium
    Hu, Ji-long
    Tang, Chang-ping
    Zhang, Xin-ming
    Deng, Yun-lai
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2013, 23 (11) : 3161 - 3166
  • [38] The influence of selective laser melting (SLM) parameters on physical, and mechanical properties of AlSi10Mg cylindrical specimen
    Mohan, R. Raj
    Krishnan, Navaneetha S.
    Sakthivel, B.
    Ramya, J.
    Sindhumathi, R.
    PHYSICA SCRIPTA, 2025, 100 (02)
  • [39] Modification of Mg2Si in Mg-Si alloys with gadolinium
    Ye, Lingying
    Hu, Jilong
    Tang, Changping
    Zhang, Xinming
    Deng, Yunlai
    Liu, Zhaoyang
    Zhou, Zhile
    MATERIALS CHARACTERIZATION, 2013, 79 : 1 - 6
  • [40] Modification of Mg2Si in Mg-Si alloys with yttrium
    Jiang, QC
    Wang, HY
    Wang, Y
    Ma, BX
    Wang, JG
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2005, 392 (1-2): : 130 - 135
12345