Co-PP/EPDM Blend Optimization Using D-Optimal Design for Medical Applications

被引：3

作者：

Balaji, Anand Bellam ^{[1
]}

Khalid, Mohammad ^{[1
]}

Ratnam, Chantara Thevy ^{[2
]}

Michael, Feven Mattews ^{[1
]}

Walvekar, Rashmi ^{[3
]}

机构：

[1] Univ Nottingham, Fac Engn, Dept Chem & Environm Engn, Malaysia Campus,Jalan Broga, Semenyih, Selangor, Malaysia

[2] Agensi Nuklear Malaysia, Radiat Proc Technol Div, Bangi, Selangor, Malaysia

[3] Taylors Univ, Energy Res Div, Subang Jaya, Selangor, Malaysia

来源：

POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING | 2017年 / 56卷 / 02期

关键词：

Co-PP; D-optimal; EPDM; mechanical properties; optimization; POLYPROPYLENE; CRYSTALLIZATION; RUBBER;

D O I：

10.1080/03602559.2016.1211695

中图分类号：

O63 [高分子化学（高聚物）];

学科分类号：

070305 ; 080501 ; 081704 ;

摘要：

This work focuses on the optimization and identification of blend with balanced mechanical properties of Co-PP/EPDM. The blending factors include time, temperature, screw speed, and blend ratio. Tensile strength and elongation at break were studied as the two responses. D-Optimal model was used to fit the regression line, which was validated using analysis of variance and "lack of fit" test. An average error of 10% (for tensile strength) and 3.2% (for elongation at break) was observed between the actual and predicted values. Further, the thermal stability, dynamic mechanical analysis, and phase morphology of the optimized blend were also investigated. [GRAPHICS] .

引用

页码：216 / 226

页数：11

共 50 条

[31] Microemulsion-Based Gel of Terbinafine for the Treatment of Onychomycosis: Optimization of Formulation Using D-Optimal Design
Bhavesh S. Barot
Punit B. Parejiya
Hetal K. Patel
Mukesh C. Gohel
Pragna K. Shelat
AAPS PharmSciTech, 2012, 13 : 184 - 192
[32] Microemulsion-Based Gel of Terbinafine for the Treatment of Onychomycosis: Optimization of Formulation Using D-Optimal Design
Barot, Bhavesh S.
Parejiya, Punit B.
Patel, Hetal K.
Gohel, Mukesh C.
Shelat, Pragna K.
AAPS PHARMSCITECH, 2012, 13 (01): : 184 - 192
[33] Optimization of extended zero-order release gliclazide tablets using D-optimal mixture design
Jin, Xinghua
Zhang, Yunhui
Xiao, Li
Zhao, Zhenyu
YAKUGAKU ZASSHI-JOURNAL OF THE PHARMACEUTICAL SOCIETY OF JAPAN, 2008, 128 (10): : 1475 - 1483
[34] Optimization of a Mucoadhesive Vaginal Gel Containing Clotrimazole Using a D-Optimal Experimental Design and Multivariate Analysis
Dinte, Elena
Iovanov, Rares Iuliu
Bodoki, Andreea Elena
Colosi, Ioana Alina
Colosi, Horatiu Alexandru
Tosa, Nicoleta
Vostinaru, Oliviu
Tomuta, Ioan
POLYMERS, 2023, 15 (09)
[35] Deciphering hygromycin B biosynthetic pathway and D-optimal design for production optimization
Muath Suliman
Amr S. Bishr
Khaled M. Aboshanab
World Journal of Microbiology and Biotechnology, 2025, 41 (5)
[36] Optimization of Proportion and Formulation Process of Jinweng Granule by D-Optimal Mixture Design
Xin YUE
Li LIU
Yongfeng HAO
Juan LIU
Dengfang CHENG
Qingchang YANG
Xianchao YANG
Xuehong HU
Medicinal Plant, 2018, (01) : 30 - 35
[37] Load Reconstruction Technique Using D-Optimal Design and Markov Parameters
Gupta, Deepak K.
Dhingra, Anoop K.
SHOCK AND VIBRATION, 2015, 2015
[38] Investigations and development of novel fuel blends using biodiesel and butylated hydroxytoluene: optimization using D-optimal design and desirability
Nguyen, Van Nhanh
Ganapathi, R.
Omprakash, B.
Sharma, Prabhakar
Pham, Nguyen Dang Khoa
Nguyen, Phuoc Quy Phong
Tran, Viet Dung
Le, Duc Trong Nguyen
ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS, 2023, 45 (04) : 13021 - 13040
[39] Study on car shampoo formulation using D-optimal statistical design
Krishnaiah, Duduku
Sarbatly, Rosalam
Anisuzzaman, S. M.
Madais, Enddy
INTERNATIONAL JOURNAL OF INDUSTRIAL CHEMISTRY, 2012, 3 (01) : 1 - 8
[40] Influence of Gelatin and Propolis Extract on Honey Gummy Jelly Properties: Optimization Using D-Optimal Mixture Design
Kaewpetch, Kultida
Yolsuriyan, Saowapa
Disayathanoowat, Terd
Phokasem, Patcharin
Jannu, Taruedee
Renaldi, Gerry
Samakradhamrongthai, Rajnibhas Sukeaw
GELS, 2024, 10 (04)

← 1 2 3 4 5 →