Co-PP/EPDM Blend Optimization Using D-Optimal Design for Medical Applications

被引：3

作者：

Balaji, Anand Bellam ^{[1
]}

Khalid, Mohammad ^{[1
]}

Ratnam, Chantara Thevy ^{[2
]}

Michael, Feven Mattews ^{[1
]}

Walvekar, Rashmi ^{[3
]}

机构：

[1] Univ Nottingham, Fac Engn, Dept Chem & Environm Engn, Malaysia Campus,Jalan Broga, Semenyih, Selangor, Malaysia

[2] Agensi Nuklear Malaysia, Radiat Proc Technol Div, Bangi, Selangor, Malaysia

[3] Taylors Univ, Energy Res Div, Subang Jaya, Selangor, Malaysia

来源：

POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING | 2017年 / 56卷 / 02期

关键词：

Co-PP; D-optimal; EPDM; mechanical properties; optimization; POLYPROPYLENE; CRYSTALLIZATION; RUBBER;

D O I：

10.1080/03602559.2016.1211695

中图分类号：

O63 [高分子化学（高聚物）];

学科分类号：

070305 ; 080501 ; 081704 ;

摘要：

This work focuses on the optimization and identification of blend with balanced mechanical properties of Co-PP/EPDM. The blending factors include time, temperature, screw speed, and blend ratio. Tensile strength and elongation at break were studied as the two responses. D-Optimal model was used to fit the regression line, which was validated using analysis of variance and "lack of fit" test. An average error of 10% (for tensile strength) and 3.2% (for elongation at break) was observed between the actual and predicted values. Further, the thermal stability, dynamic mechanical analysis, and phase morphology of the optimized blend were also investigated. [GRAPHICS] .

引用

页码：216 / 226

页数：11

共 50 条

[21] D-optimal Design for Preparation and Optimization of Fast Dissolving Bosentan Nanosuspension
Ghasemian, Elham
Motaghian, Parisa
Vatanara, Alireza
ADVANCED PHARMACEUTICAL BULLETIN, 2016, 6 (02) : 211 - 218
[22] Medium optimization for polyhydroxyalkanoate production by Pseudomonas pseudoalcaligenes strain Te using D-optimal design
Zihayat, Bahare
Shakibaie, Mojtaba
Sabouri-Shahrbabak, Saleheh
Doostmohammadi, Mohsen
Ameri, Atefeh
Adeli-Sardou, Mahboubeh
Forootanfar, Hamid
BIOCATALYSIS AND AGRICULTURAL BIOTECHNOLOGY, 2019, 18
[23] Formulation and optimization of gastroretentive bilayer tablets of calcium carbonate using D-optimal mixture design
Moganti, Manasa
Nanjappa, Shivakumar H.
E-POLYMERS, 2021, 21 (01) : 57 - 71
[24] Augmented D-optimal design for effective response surface modeling and optimization
Min-Soo Kim
Kyung-Jin Hong
Dong-Hoon Chol
KSME International Journal, 2002, 16 : 203 - 210
[25] Optimization of novel multigrain pasta and evaluation of physicochemical properties: using D-optimal mixture design
Rousta, Leila Kamali
Yazdi, Amir Pouya Ghandehari
Khorasani, Sepideh
Tavakoli, Mohammad
Ahmadi, Zahra
Amini, Mahdi
FOOD SCIENCE & NUTRITION, 2021, 9 (10): : 5546 - 5556
[26] Modeling and optimization in tribological parameters of polyether ether ketone matrix composites using D-optimal design
Rajmohan, T.
Palanikumar, K.
Davim, J. P.
Premnath, A. Arun
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS, 2016, 29 (02) : 161 - 188
[27] Application of D-optimal Design for Modeling and Optimization of Operation Conditions in SAGD Process
Nguyen, H. X.
Bae, Wisup
Ryoo, W. S.
Nam, M. J.
Tu, T. N.
ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS, 2014, 36 (19) : 2142 - 2153
[28] Optimization of Monolayer Hydrophilic Matrix Tablets Containing Nisoldipine Solid Dispersion Using D-optimal Design
Kumar, Sandeep
Singh, Romi
Gupta, Roopnarayan
INDIAN JOURNAL OF PHARMACEUTICAL EDUCATION AND RESEARCH, 2017, 51 (02) : S91 - S97
[29] Optimization of cutting fluids and cutting parameters during end milling by using D-optimal design of experiments
Kuram, Emel
Ozcelik, Babur
Bayramoglu, Mahmut
Demirbas, Erhan
Simsek, Bilgin Tolga
JOURNAL OF CLEANER PRODUCTION, 2013, 42 : 159 - 166
[30] Optimization of Short Glass Fiber and PTFE Reinforced PC Composites Using D-optimal Mixture Design
Lin, J. -C.
INTERNATIONAL POLYMER PROCESSING, 2010, 25 (02) : 139 - 148

← 1 2 3 4 5 →