In situ HRTEM observations of the formation of reaction phases from liquid Ag-Cu-Ti alloy and SiC, Si and C substrates

被引:3
|
作者
Iwamoto, C [1 ]
Matsunaga, K [1 ]
Yamamoto, T [1 ]
Ikuhara, Y [1 ]
机构
[1] Univ Tokyo, Sch Engn, Inst Engn Innovat, Bunkyo Ku, Tokyo 1138656, Japan
关键词
D O I
10.1088/0957-4484/15/6/015
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
Processes of reaction between Ag-Cu-Ti molten alloy and silicon, carbon and SiC substrates were directly observed by in situ heating high-resolution electron microscopy. It was found that TIC grew in a layer by layer mode at the spreading front, and that a double layer consisting of an outer Ti5Si3 and an inner TiC layers was formed by the reaction between the SiC substrate and the molten alloy. The morphology of the spreading front was also found to depend on the chemical composition of the dissociated substrate in the molten alloy.
引用
收藏
页码:S398 / S401
页数:4
相关论文
共 50 条
  • [41] (Ag-Cu-Ti)+(Ti+C)复合钎料钎焊C_f/SiC复合材料与TC4钛合金
    薛行雁
    龙伟民
    黄继华
    熊进辉
    焊接, 2011, (03) : 60 - 63+71
  • [42] In situ formation of two amorphous phases by liquid phase separation in Y-Ti-Al-Co alloy
    Park, BJ
    Chang, HJ
    Kim, DH
    Kim, WT
    APPLIED PHYSICS LETTERS, 2004, 85 (26) : 6353 - 6355
  • [43] Evolution of 3C-SiC islands nucleated from a liquid phase on Si face α-SiC substrates
    Kim-Hak, Olivier
    Ferro, Gabriel
    Lorenzzi, Jean
    Carole, Davy
    Dazord, Jacques
    Chaudouet, Patrick
    Chaussende, Didier
    Miele, Philippe
    THIN SOLID FILMS, 2010, 518 (15) : 4234 - 4241
  • [44] VARIATIONS OF PHASES AND MICROSTRUCTURES OF REACTION-PRODUCTS IN THE INTERFACE OF AL2O3/AG-CU-TI JOINT SYSTEM WITH HEAT-TREATMENT
    BYUN, W
    KIM, H
    YUN, M
    SCRIPTA METALLURGICA ET MATERIALIA, 1994, 31 (11): : 1543 - 1547
  • [45] In situ reaction synthesis and characterization of Ti3Si(Al)C2/SiC composites
    Wan, D. T.
    Zhou, Y. C.
    Bao, Y. W.
    Yan, C. K.
    CERAMICS INTERNATIONAL, 2006, 32 (08) : 883 - 890
  • [46] Brazed joints of Cf-SiC composite to Ti alloy using Ag-Cu-Ti-(Ti+C) mixed powder as interlayer
    Lin, G. B.
    Huang, J. H.
    POWDER METALLURGY, 2006, 49 (04) : 345 - 348
  • [47] Phase evolution and reaction mechanism during synthesis of Ti3SiC2 from Ti-Si-C and Ti-SiC-C systems
    Yang, Jinsong
    Ye, Fang
    Cheng, Laifei
    Zhao, Kai
    Wei, Yucong
    Chen, Jinlu
    Tu, Jianyong
    JOURNAL OF ALLOYS AND COMPOUNDS, 2023, 962
  • [48] Control of residual stresses in 2Si-B-3C-N and Nb joints by the Ag-Cu-Ti plus Mo composite interlayer
    Pan, Rui
    Kovacevic, Sasa
    Lin, Tiesong
    He, Peng
    Sekulic, Dusan P.
    Mesarovic, Sinisa Dj.
    Yang, Zhihua
    Shen, Yanxu
    Wei, Hongmei
    MATERIALS & DESIGN, 2016, 99 : 193 - 200
  • [49] Reaction-composite brazing of carbon fiber reinforced SiC composite and TC4 alloy using Ag-Cu-Ti-(Ti plus C) mixed powder
    Cui, Bing
    Huang, Ji Hua
    Xiong, Jin Hui
    Zhang, Hua
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 562 : 203 - 210
  • [50] Joining of C/SiC Composite and TC4 Alloy Using 70Ag28Cu2Ti Active Brazing Alloy
    Li, Jiake
    Liu, Xin
    Zhou, Jianer
    TESTING AND EVALUATION OF INORGANIC MATERIALS III, 2013, 544 : 167 - 171