In situ HRTEM observations of the formation of reaction phases from liquid Ag-Cu-Ti alloy and SiC, Si and C substrates

被引：3

作者：

Iwamoto, C ^{[1
]}

Matsunaga, K ^{[1
]}

Yamamoto, T ^{[1
]}

Ikuhara, Y ^{[1
]}

机构：

[1] Univ Tokyo, Sch Engn, Inst Engn Innovat, Bunkyo Ku, Tokyo 1138656, Japan

来源：

NANOTECHNOLOGY | 2004年 / 15卷 / 06期

关键词：

D O I：

10.1088/0957-4484/15/6/015

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Processes of reaction between Ag-Cu-Ti molten alloy and silicon, carbon and SiC substrates were directly observed by in situ heating high-resolution electron microscopy. It was found that TIC grew in a layer by layer mode at the spreading front, and that a double layer consisting of an outer Ti5Si3 and an inner TiC layers was formed by the reaction between the SiC substrate and the molten alloy. The morphology of the spreading front was also found to depend on the chemical composition of the dissociated substrate in the molten alloy.

引用

页码：S398 / S401

页数：4

共 50 条

[31] Ni and Ti diffusion barrier layers between Ti-Si-C and Ti-Si-C-Ag nanocomposite coatings and Cu-based substrates
Sarius, N. G.
Lauridsen, J.
Lewin, E.
Lu, J.
Hogberg, H.
Oberg, A.
Ljungcrantz, H.
Leisner, P.
Eklund, P.
Hultman, L.
SURFACE & COATINGS TECHNOLOGY, 2012, 206 (8-9): : 2558 - 2565
[32] Vacuum brazing of SiO2f/SiO2 and C/C composite using Ag-Cu-Ti filler alloy
Xiong, Hua-Ping, 1600, Beijing Institute of Aeronautical Materials (BIAM)
[33] The Effect of Mo Particles Addition in Ag-Cu-Ti Filler Alloy on Ti(C,N)-Based Cermet/45 Steel-Brazed Joints
He, Hu
Du, Xueming
Huang, Xiaokai
Xu, Weijian
Yao, Zhenhua
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2018, 27 (05) : 2438 - 2445
[34] The Effect of Mo Particles Addition in Ag-Cu-Ti Filler Alloy on Ti(C,N)-Based Cermet/45 Steel-Brazed Joints
Hu He
Xueming Du
Xiaokai Huang
Weijian Xu
Zhenhua Yao
Journal of Materials Engineering and Performance, 2018, 27 : 2438 - 2445
[35] The Effect of Mo Particles Addition in Ag-Cu-Ti Filler Alloy on Ti(C,N)-Based Cermet/45 Steel-Brazed Joints
He, Hu
Du, Xueming
Huang, Xiaokai
Xu, Weijian
Yao, Zhenhua
Journal of Materials Engineering and Performance, 2018, 27 (05): : 2438 - 2445
[36] Reaction phases in SiC/SiC or Si3N4/Si3N4 joint brazed with Cu-Ti alloys
Tamai, T
Naka, M
JOURNAL OF MATERIALS SCIENCE LETTERS, 1996, 15 (12) : 1025 - 1027
[37] Microstructure of reaction layer and its effect on the joining strength of SiC/SiC joints brazed using Ag-Cu-In-Ti alloy
Liu, Yan
Zhu, Yunzhou
Yang, Yong
Liu, Xuejian
Huang, Zhengren
JOURNAL OF ADVANCED CERAMICS, 2014, 3 (01) : 71 - 75
[38] Effect of Si3N4-particles addition in Ag-Cu-Ti filler alloy on Si3N4/TiAl brazed joint
Song, X. G.
Cao, J.
Wang, Y. F.
Feng, J. C.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (15): : 5135 - 5140
[39] Epitaxial Formation of Graphene on Si Substrates: from Heteroepitaxy of 3C-SiC to Si Sublimation
Suemitsu, M.
Handa, H.
Saito, E.
Fukidome, H.
SIGE, GE, AND RELATED COMPOUNDS 4: MATERIALS, PROCESSING, AND DEVICES, 2010, 33 (06): : 859 - 867
[40] Formation of typical Cu-Ti intermetallic phases via a liquid-solid reaction approach
Fan, Yonggang
Fan, Junxiang
Wang, Cong
INTERMETALLICS, 2019, 113

← 1 2 3 4 5 →