New printed circuit heat exchanger with S-shaped fins for hot water supplier

被引：204
|
作者：
Ngo, Tri Lam [1 ]
Kato, Yasuyoshi [1 ]
Nikitin, Konstantin [1 ]
Tsuzuki, Nobuyoshi [1 ]
机构：
[1] Tokyo Inst Technol, Nucl Reactors Res Lab, Meguro Ku, Tokyo 1528550, Japan
来源：
EXPERIMENTAL THERMAL AND FLUID SCIENCE | 2006年 / 30卷 / 08期
关键词：
printed circuit heat exchanger; supercritical CO2; hot water supplier; waste heat recovery; overall heat transfer coefficient; pressure drop;
D O I：
10.1016/j.expthermflusci.2006.03.010
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
A new PCHE with an S-shaped fin configuration was applied to a hot water supplier in which cold water of 7 degrees C is warmed to 90 degrees C through heat-exchange with supercritical CO2 of 118 degrees C and 11.5 MPa pressure. The fin and plate configurations were determined using 3D CFD simulations for the CO2 side and H2O side and the thermal-hydraulic performance of hot water supplier was evaluated. Compared with a hot water supplier that is currently used in a residential heat pump, the new PCHE provides about 3.3 times less volume; and lower pressure drop by 37% in the CO2 side and by 10 times in H2O side. (C) 2006 Elsevier Inc. All rights reserved.
引用
收藏
页码：811 / 819
页数：9
相关论文
共 50 条
  • [11] Numerical Analysis of Slotted Airfoil Fins for Printed Circuit Heat Exchanger in S-CO2 Brayton Cycle
    Li, Xiao Long
    Tang, G. H.
    Fan, Yuan Hong
    Yang, Dan Lei
    Wang, Si Qi
    JOURNAL OF NUCLEAR ENGINEERING AND RADIATION SCIENCE, 2019, 5 (04):
  • [12] Study on Heat Transfer and Pressure Drop Performances of Airfoil-Shaped Printed Circuit Heat Exchanger
    Li, Lei
    Ma, Ting
    Xu, XiangYang
    Zeng, Min
    Wang, QiuwWang
    PRES 2014, 17TH CONFERENCE ON PROCESS INTEGRATION, MODELLING AND OPTIMISATION FOR ENERGY SAVING AND POLLUTION REDUCTION, PTS 1-3, 2014, 39 : 895 - 900
  • [13] High performance printed circuit heat exchanger
    Tsuzuki, Nobuyoshi
    Kato, Yasuyoshi
    Ishiduka, Takao
    APPLIED THERMAL ENGINEERING, 2007, 27 (10) : 1702 - 1707
  • [14] INVESTIGATION OF PRINTED CIRCUIT HEAT EXCHANGER FOR VHTRs
    Mylavarapu, Sai K.
    Sun, Xiaodong
    Figley, Justin
    Needler, Noah J.
    Christensen, Richard N.
    PROCEEDINGS OF THE 4TH INTERNATIONAL TOPICAL MEETING ON HIGH TEMPERATURE REACTOR TECHNOLOGY, VOL 1, 2009, : 33 - 40
  • [15] Experimental testing of the heat exchanger with star-shaped fins
    Bosnjakovic, Mladen
    Muhic, Simon
    Cikic, Ante
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2020, 149
  • [16] Solidification performance of heat exchanger with tree-shaped fins
    Zheng, Jiayi
    Wang, Jing
    Chen, Taotao
    Yu, Yanshun
    RENEWABLE ENERGY, 2020, 150 : 1098 - 1107
  • [17] Numerical study on novel airfoil fins for printed circuit heat exchanger using supercritical CO2
    Cui, Xinying
    Guo, Jiangfeng
    Huai, Xiulan
    Cheng, Keyong
    Zhang, Haiyang
    Xiang, Mengru
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2018, 121 : 354 - 366
  • [18] Experimental and numerical studies on the thermal-hydraulic performance of a novel airfoil fins printed circuit heat exchanger
    Han, Zengxiao
    Cui, Xinying
    Guo, Jiangfeng
    Zhang, Haiyan
    Zhou, Jingzhi
    Cheng, Keyong
    Zhang, Huzhong
    Huai, Xiulan
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2023, 217
  • [19] INVESTIGATION ON THE FLOW AND HEAT TRANSFER CHARACTERISTICS OF SUPERCRITICAL CO2 IN PRINTED CIRCUIT HEAT EXCHANGER WITH ASYMMETRIC AIRFOIL FINS
    Wang, Dan
    Li, Jiagang
    Pan, Kang
    Wang, Luyao
    Liu, Zunchao
    THERMAL SCIENCE, 2023, 27 (6A): : 4565 - 4579
  • [20] EXPERIMENTAL INSIGHTS INTO THERMAL-HYDRAULIC PERFORMANCE OF A COMPACT PRINTED CIRCUIT HEAT EXCHANGER WITH AIRFOIL FINS USING HIGH-PRESSURE WATER
    Liu, Weitong
    Zhi, Haoxing
    Qi, Han
    Fu, Yanchen
    PROCEEDINGS OF ASME 2024 7TH INTERNATIONAL CONFERENCE ON MICRO/NANOSCALE HEAT AND MASS TRANSFER, MNHMT 2024, 2024,
12345