New printed circuit heat exchanger with S-shaped fins for hot water supplier

被引：204
|
作者：
Ngo, Tri Lam [1 ]
Kato, Yasuyoshi [1 ]
Nikitin, Konstantin [1 ]
Tsuzuki, Nobuyoshi [1 ]
机构：
[1] Tokyo Inst Technol, Nucl Reactors Res Lab, Meguro Ku, Tokyo 1528550, Japan
来源：
EXPERIMENTAL THERMAL AND FLUID SCIENCE | 2006年 / 30卷 / 08期
关键词：
printed circuit heat exchanger; supercritical CO2; hot water supplier; waste heat recovery; overall heat transfer coefficient; pressure drop;
D O I：
10.1016/j.expthermflusci.2006.03.010
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
A new PCHE with an S-shaped fin configuration was applied to a hot water supplier in which cold water of 7 degrees C is warmed to 90 degrees C through heat-exchange with supercritical CO2 of 118 degrees C and 11.5 MPa pressure. The fin and plate configurations were determined using 3D CFD simulations for the CO2 side and H2O side and the thermal-hydraulic performance of hot water supplier was evaluated. Compared with a hot water supplier that is currently used in a residential heat pump, the new PCHE provides about 3.3 times less volume; and lower pressure drop by 37% in the CO2 side and by 10 times in H2O side. (C) 2006 Elsevier Inc. All rights reserved.
引用
收藏
页码：811 / 819
页数：9
相关论文
共 50 条
  • [1] Nusselt number correlations for a microchannel heat exchanger hot water supplier with S-shaped fins
    Tsuzuki, Nobuyoshi
    Utamura, Motoaki
    Ngo, Tri Lam
    APPLIED THERMAL ENGINEERING, 2009, 29 (16) : 3299 - 3308
  • [2] Advanced Microchannel Heat Exchanger with S-shaped Fins
    Tsuzuki, Nobuyoshi
    Kato, Yasuyoshi
    Nikitin, Konstantin
    Ishizuka, Takao
    JOURNAL OF NUCLEAR SCIENCE AND TECHNOLOGY, 2009, 46 (05) : 403 - 412
  • [3] Experimental study on heat transfer and pressure drop characteristics in a microchannel heat exchanger assembly with S-shaped fins
    Zeng, Chen
    Song, Yinxi
    Zhou, Xiang
    Zhang, Feixi
    Jiao, Ming
    Liu, Maolong
    Gu, Hanyang
    APPLIED THERMAL ENGINEERING, 2022, 210
  • [4] Hybrid optimization for structure of printed circuit heat exchanger with airfoil fins
    Gu, Xin
    Wang, Jie
    Wang, Hanzhen
    Liu, Xin
    Wang, Yongqing
    INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2025, 212
  • [5] Numerical study of crossed airfoil fins in a printed circuit heat exchanger
    Wu, Jinxing
    Xiao, Jiabang
    APPLIED THERMAL ENGINEERING, 2023, 230
  • [6] NUMERICAL STUDY OF FLOW STRUCTURE AND THERMOHYDRAULIC PERFORMANCE OF SCO2 IN S-SHAPED PRINTED CIRCUIT HEAT EXCHANGER WITH LONGITUDINAL RIBS
    Jing, Qi
    Zhang, Di
    HEAT TRANSFER RESEARCH, 2020, 51 (02) : 147 - 171
  • [7] Comprehensive Numerical Analysis on Flow and Heat Transfer Characteristics of Printed Circuit Heat Exchanger With Fins
    Lu, Peng
    Yang, Qinshan
    Wei, Jian
    Wu, Peiyang
    Huang, Hulin
    JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS, 2022, 14 (07)
  • [8] Numerical study on bionic airfoil fins used in printed circuit plate heat exchanger
    Yu, Chulin
    Liu, Binfeng
    Cui, Yulin
    Wang, Wenqing
    Yang, Yuxi
    OPEN PHYSICS, 2024, 22 (01):
  • [9] Investigation on Thermal and Hydraulic Performances in a Printed Circuit Heat Exchanger with Airfoil and Vortex Generating Fins
    Tang, Linghong
    Tian, Yulin
    Liu, Jialun
    Xie, Gongnan
    Sunden, Bengt
    HEAT TRANSFER ENGINEERING, 2024, 45 (14) : 1206 - 1221
  • [10] Thermo-Hydraulic Performance of Printed Circuit Heat Exchanger With Different Cambered Airfoil Fins
    Chu, Wen-Xiao
    Bennett, Katrine
    Cheng, Jie
    Chen, Yi-Tung
    Wang, Qiu-Wang
    HEAT TRANSFER ENGINEERING, 2020, 41 (08) : 708 - 722
12345