Synergistic toughening of a hybrid NiAl composite reinforced with partially stabilized zirconia and molybdenum particles

被引：10

作者：

Li, M ^{[1
]}

Soboyejo, WO ^{[1
]}

机构：

[1] Ohio State Univ, Dept Mat Sci & Engn, Columbus, OH 43210 USA

来源：

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 1999年 / 271卷 / 1-2期

关键词：

transformation toughening; crack bridging; molybdenum particles;

D O I：

10.1016/S0921-5093(99)00384-6

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

This paper presents preliminary experimental evidence of synergistic interactions between transformation toughening and crack bridging in an NiAl composite reinforced with 2 mol% yttria partially stabilized zirconia and molybdenum particles. The observed levels of synergy are shown to be consistent with predictions from a theoretical model by Amazigo and Budiansky (J.C. Amazigo, B. Budiansky, J. Mech. Phys. Solids 36 (1988) 581-595.). The implications of the results are also discussed for the potential development of synergistically toughened intermetallic and ceramic composites. (C) 1999 Elsevier Science S.A. All rights reserved.

引用

页码：491 / 495

页数：5

共 50 条

[41] Thermal and mechanical properties of partially stabilized zirconia coatings manufactured by hybrid plasma spray process
Antou, G
Montavon, G
Hlawka, F
Bolot, R
Cornet, A
Coddet, C
Machi, F
HIGH TEMPERATURE MATERIAL PROCESSES, 2005, 9 (01): : 109 - 125
[42] Evaluating compressive property and hot deformation behavior of molybdenum alloy reinforced by nanoscale zirconia particles
Xu, Liujie
Sun, Tielong
Zhou, Yucheng
Xiao, Fangnao
Zhang, Minjie
Wei, Shizhong
JOURNAL OF ALLOYS AND COMPOUNDS, 2021, 860
[43] Assessment of tensile behaviour of an Al-Mg alloy composite reinforced with NiAl and oxidized NiAl powder particles helped by nanoindentation
Pour, H. A.
Lieblich, M.
Lopez, A. J.
Rams, J.
Salehi, M. T.
Shabestari, S. G.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2007, 38 (12) : 2536 - 2540
[44] Fabrication and properties of reduced graphene oxide reinforced yttria-stabilized zirconia composite ceramics
Shin, Jung-Hoo
Hong, Seong-Hyeon
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2014, 34 (05) : 1297 - 1302
[45] Effect of Stress-Induced Phase Transformation on the Fracture Toughness of Fe3Al Intermetallic Reinforced with Yttria-Partially Stabilized Zirconia Particles
Lima Amiri Talischi
Ahad Samadi
Metallurgical and Materials Transactions A, 2017, 48 : 5046 - 5058
[46] Effect of Stress-Induced Phase Transformation on the Fracture Toughness of Fe3Al Intermetallic Reinforced with Yttria-Partially Stabilized Zirconia Particles
Talischi, Lima Amiri
Samadi, Ahad
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2017, 48A (10): : 5046 - 5058
[47] Characterization of aluminium matrix reinforced with tungsten carbide and molybdenum disulphide hybrid composite
Anish, A.
Kumar, M. Ananth
2ND INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING (ICAME 2018), 2018, 402
[48] Toughening enhanced at elevated temperatures in an alumina/zirconia dual-phase matrix composite reinforced with silicon carbide whiskers
Akatsu, Takashi
Nakanishi, Shin
Tanabe, Yasuhiro
Wakai, Fumihiro
Yasuda, Eiichi
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2013, 33 (15-16) : 3157 - 3163
[49] Synthesis and characterization of spark plasma sintered zirconia and ferrotitanium reinforced hybrid aluminium composite
Akinwamide, Samuel Olukayode
Maleka, Mabontle
Motabeni, Nthabiseng
Akinribide, Ojo Jeremiah
Oluwasegun, Falodun Eso
Olubambi, Peter Apata
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2023, 125 (1-2): : 763 - 776
[50] Microstructure and tribological properties of laser cladded TiAlSi composite coatings reinforced by yttria-stabilized zirconia
Zeng, Ming
Li, Chonggui
Lu, Qinghua
Deng, Peiran
Liu, Chuanming
Wang, Feifei
Guo, Yajun
Wang, Jinqian
Wang, You
MATERIALS RESEARCH EXPRESS, 2019, 6 (11):

← 1 2 3 4 5 →