Synergistic toughening of a hybrid NiAl composite reinforced with partially stabilized zirconia and molybdenum particles

被引:10
|
作者
Li, M [1 ]
Soboyejo, WO [1 ]
机构
[1] Ohio State Univ, Dept Mat Sci & Engn, Columbus, OH 43210 USA
关键词
transformation toughening; crack bridging; molybdenum particles;
D O I
10.1016/S0921-5093(99)00384-6
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
This paper presents preliminary experimental evidence of synergistic interactions between transformation toughening and crack bridging in an NiAl composite reinforced with 2 mol% yttria partially stabilized zirconia and molybdenum particles. The observed levels of synergy are shown to be consistent with predictions from a theoretical model by Amazigo and Budiansky (J.C. Amazigo, B. Budiansky, J. Mech. Phys. Solids 36 (1988) 581-595.). The implications of the results are also discussed for the potential development of synergistically toughened intermetallic and ceramic composites. (C) 1999 Elsevier Science S.A. All rights reserved.
引用
收藏
页码:491 / 495
页数:5
相关论文
共 50 条
  • [31] Synergistic toughening of thermoplastic particles-inorganic particles to carbon fiber reinforced epoxy resin composites
    Liu X.
    Chen D.
    He H.
    Sun T.
    Wu Z.
    Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica, 2020, 37 (08): : 1904 - 1910
  • [32] Microstructures of partially stabilized zirconia manufactured via hybrid plasma spray process
    Antou, G
    Montavon, G
    Hlawka, F
    Cornet, A
    Coddet, C
    CERAMICS INTERNATIONAL, 2005, 31 (04) : 611 - 619
  • [33] Kinetics of zircon formation in yttria partially stabilized zirconia as a result of oxidation of embedded molybdenum disilicide
    Nozahic, F.
    Carabat, A. L.
    Mao, W.
    Monceau, D.
    Estournes, C.
    Kwakernaak, C.
    van der Zwaag, S.
    Sloof, W. G.
    ACTA MATERIALIA, 2019, 174 : 206 - 216
  • [34] A STRUCTURAL STUDY OF OXIDATION IN A ZIRCONIA-TOUGHENED ALUMINA FIBER-REINFORCED NIAL COMPOSITE
    NOURBAKHSH, S
    SAHIN, O
    MARGOLIN, H
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1994, 25 (06): : 1291 - 1299
  • [35] The microstructure and wear resistance characteristics of electroformed nickel and partially stabilized zirconia composite coatings
    Li, J
    Wu, YY
    Wang, DL
    Hu, XG
    JOURNAL OF MATERIALS SCIENCE, 2000, 35 (07) : 1751 - 1758
  • [36] STRESS-WAVE INDUCED DAMAGE IN ALUMINA AND ALUMINA REINFORCED WITH PARTIALLY-STABILIZED ZIRCONIA
    LOURO, L
    LINDFORS, A
    MEYERS, MA
    JOURNAL OF METALS, 1987, 39 (10): : A74 - A74
  • [37] Temperature dependence of the fracture strength of composite corundum materials reinforced with Ni and NiAl particles
    Evdokimov V.Y.
    Tyut'Kova Y.B.
    Egorov A.A.
    Ovsyannikov N.A.
    Gnidash S.V.
    Smirnov V.V.
    Fedotov A.Y.
    Sevost'Yanov M.A.
    Barinov S.M.
    Lysenkov A.S.
    Inorganic Materials: Applied Research, 2014, 5 (04) : 382 - 385
  • [38] R-curve behavior and flexural strength of zirconia-toughened alumina and partially stabilized zirconia composite laminates
    Blaese, Diego
    Benitez, Tobias
    Barros, Marcelo
    Jelitto, Hans
    Travitzky, Nahum
    Hotza, Dachamir
    Janssen, Rolf
    CERAMICS INTERNATIONAL, 2018, 44 (12) : 13463 - 13468
  • [39] Fabrication and mechanical characterization of hybrid composite reinforced with nanoparticles of alumina and zirconia
    Vij, Vivek
    Agarwal, Raj
    Garg, Mohinder Pal
    Khanna, Rajesh
    Gupta, Vishal
    POLYMER COMPOSITES, 2022, 43 (10) : 7315 - 7325
  • [40] Synergistic toughening effect of hybrid clay particles on poly(lactic acid)/natural rubber blend
    Ahn, Jung Hyun
    Hong, Joung Sook
    Ahn, Kyung Hyun
    POLYMER COMPOSITES, 2021, 42 (02) : 1021 - 1033