A study on the lap shear strength of a co-cured single lap joint

被引：31

作者：

Shin, KC ^{[1
]}

Lee, JJ ^{[1
]}

Lee, DG ^{[1
]}

机构：

[1] Korea Adv Inst Sci & Technol, Dept Mech Engn, Yusong Gu, Taejon 305701, South Korea

来源：

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY | 2000年 / 14卷 / 01期

关键词：

co-cured single lap joint; excess resin; lap shear strength; surface roughness; bond length; stacking sequence;

D O I：

10.1163/156856100742140

中图分类号：

TQ [化学工业];

学科分类号：

0817 ;

摘要：

In this paper, the lap shear strength of a co-cured single lap joint subjected to a tensile load was investigated by experimental analysis. Go-cured joint specimens with several different bonding parameters such as bond length, surface roughness, and stacking sequence of the composite laminate were fabricated and tested. The dependence of the lap shear strength of the co-cured joint on the bonding parameters was investigated from the experimental results. The failure mechanism of the co-cured single lap joint was partially cohesive failure. The lap shear strength of the co-cured single lap joint was significantly affected by the bond length and the stacking sequence of the composite laminate. However. the effect of surface roughness on the lap shear strength of the co-cured single lap joint was not so significant.

引用

页码：123 / 139

页数：17

共 50 条

[31] Effect of presence of SWCNT and Fullerene nano particles in the adhesive of CFRP single lap joint on the lap shear strength subjected to hygrothermal conditions
Esmail, Rama
Alaei, Mohammad Hossein
Eskandarijam, Jafar
Rezvaninasab, Mehran
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2023, 37 (21) : 3013 - 3029
[32] Adhesion strength and fatigue life improvement of co-cured composite/metal lap joints by silane-based interphase formation
Kim, Won-Seock
Lee, Jung-Ju
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2007, 21 (02) : 125 - 140
[33] The Effects of Environmental Temperature and Additional Pressure on the Bonding Characteristics of Co-cured Carbon/Epoxy-Aluminum Single Lap Joints
Hong, Jin-Ho
Han, Min-Gu
Chang, Seung-Hwan
JOURNAL OF ADHESION, 2015, 91 (03): : 197 - 213
[34] Effects of loading speed and shear prestrain on adhesive fatigue strength in single-lap joint
Takiguchi, Michihiro
Yoshida, Fusahito
ENGINEERING PLASTICITY AND ITS APPLICATIONS FROM NANOSCALE TO MACROSCALE, PTS 1 AND 2, 2007, 340-341 : 1479 - +
[35] CALCULATION OF STRENGTH OF SINGLE-LAP SHEAR SPECIMEN.
Lugscheider, E.
Reimann, H.
Knotek, O.
Welding Journal (Miami, Fla), 1977, 56 (06):
[36] Prediction of the tensile load capability of co-cured steel-composite tubular single lap joints considering thermal degradation
Lee, DG
Cho, DH
JOURNAL OF COMPOSITE MATERIALS, 2000, 34 (08) : 689 - 722
[37] ADHESIVE FRACTURE OF A LAP SHEAR JOINT
DEVRIES, KL
WILLIAMS, ML
CHANG, MD
EXPERIMENTAL MECHANICS, 1974, 14 (03) : 89 - 97
[38] Mathematical model for calculating the strength of a single lap adhesive joint
Koiuh, M.S.Z.
Kralj, S.
Sakic, N.
Dorn, L.
Schweissen und Schneiden/Welding and Cutting, 2001, 53 (02):
[39] Fundamental study on strength of laser welded lap joint
Kitamura, Takanori
Yosetsu Gakkai Shi/Journal of the Japan Welding Society, 2004, 73 (08): : 33 - 36
[40] Analysis of the substrate nature on the strength of a single-lap joint
Houari, A.
Madani, K.
El Ajrami, M.
Belhouari, M.
Campilho, R. D. S. G.
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2023, 45 (09)

← 1 2 3 4 5 →