A study on the lap shear strength of a co-cured single lap joint

被引：31
|
作者：
Shin, KC [1 ]
Lee, JJ [1 ]
Lee, DG [1 ]
机构：
[1] Korea Adv Inst Sci & Technol, Dept Mech Engn, Yusong Gu, Taejon 305701, South Korea
来源：
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY | 2000年 / 14卷 / 01期
关键词：
co-cured single lap joint; excess resin; lap shear strength; surface roughness; bond length; stacking sequence;
D O I：
10.1163/156856100742140
中图分类号：
TQ [化学工业];
学科分类号：
0817 ;
摘要：
In this paper, the lap shear strength of a co-cured single lap joint subjected to a tensile load was investigated by experimental analysis. Go-cured joint specimens with several different bonding parameters such as bond length, surface roughness, and stacking sequence of the composite laminate were fabricated and tested. The dependence of the lap shear strength of the co-cured joint on the bonding parameters was investigated from the experimental results. The failure mechanism of the co-cured single lap joint was partially cohesive failure. The lap shear strength of the co-cured single lap joint was significantly affected by the bond length and the stacking sequence of the composite laminate. However. the effect of surface roughness on the lap shear strength of the co-cured single lap joint was not so significant.
引用
收藏
页码：123 / 139
页数：17
相关论文
共 50 条
  • [1] Study on the lap shear strength of a co-cured single lap joint
    Shin, Kum Cheol
    Lee, Jung Ju
    Lee, Dai Gil
    1600, VSP BV, Zeist, Netherlands (14):
  • [2] Numerical Analysis of Co-cured Composite Single Lap Joint with Spew Fillets
    Zhao, Guohua
    Shu, Qinglian
    Huang, Bosheng
    MECHANICS, SOLID STATE AND ENGINEERING MATERIALS, 2011, 279 : 219 - 223
  • [3] Fatigue characteristics of a co-cured single lap joint subjected to cyclic tensile loads
    Shin, KC
    Lee, JJ
    JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2002, 16 (04) : 347 - 359
  • [4] Evaluation of interlaminar shear strength of co-cured fiber-reinforced fabric composite structures by lap joint method
    Jeon, Jae-An
    Lee, Sang-Eui
    FUNCTIONAL COMPOSITES AND STRUCTURES, 2023, 5 (02):
  • [5] In-Plane Shear Strength of Single-Lap Co-Cured Joints of Self-Reinforced Polyethylene Composites
    Vannucchi de Camargo, Felipe
    da Silva Fernandes, Eduardo
    ten Caten, Carla Schwengber
    Alves, Annelise Kopp
    Bergmann, Carlos Perez
    Minak, Giangiacomo
    MATERIALS, 2021, 14 (06)
  • [6] Effect of Geometry on Stress Distribution of Spew Fillet of Co-cured Composite Single Lap Joint
    Zhao, Guohua
    Shu, Qinglian
    Huang, Bosheng
    ADVANCES IN CIVIL ENGINEERING AND ARCHITECTURE INNOVATION, PTS 1-6, 2012, 368-373 : 179 - 182
  • [7] Torque capacity of co-cured tubular lap joints
    Choi, JH
    Lee, DG
    JOURNAL OF COMPOSITE MATERIALS, 1997, 31 (14) : 1381 - 1396
  • [8] Reinforcing an aluminum/GFRP co-cured single lap joint using inter-adherend fiber
    Matsuzaki, Ryosuke
    Shibata, Motoko
    Todoroki, Akira
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2008, 39 (05) : 786 - 795
  • [9] Influence of pinning on static strength of co-cured metal-GFRP hybrid single lap joints
    Islam, M. S.
    Tong, Liyong
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2016, 84 : 196 - 208
  • [10] Effects of hygrothermal and ambient humidity conditioning on shear strength of metal-GFRP single lap joints co-cured in and out of water
    Islam, Mohammad S.
    Tong, Liyong
    INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2016, 68 : 305 - 316
12345