Fracture toughness of aluminum nitride ceramics at cryogenic temperatures

被引:4
|
作者
Wei, Sai [1 ]
Xie, Zhipeng [1 ]
Xue, Weijiang [1 ]
Yi, Zhongzhou [2 ]
Chen, Juan [1 ]
Cheng, Lixia [1 ]
机构
[1] Tsinghua Univ, Sch Mat Sci & Engn, State Key Lab New Ceram & Fine Proc, Beijing 100084, Peoples R China
[2] Honghe Univ, Coll Sci, Honghe 661100, Yunnan, Peoples R China
关键词
Toughness and toughening; Grain boundary; Cryogenic temperatures; THERMAL-CONDUCTIVITY; ELECTRON-MICROSCOPY; ALN CERAMICS; GRAIN-SIZE; INSULATION; STRENGTH; BEHAVIOR; MODE;
D O I
10.1016/j.ceramint.2014.05.012
中图分类号
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
We reported, for the first time, the fracture toughness of aluminum nitride ceramics at cryogenic temperatures. The fracture toughness increased from 3.98 +/- 0.19 to 4.59 +/- 0.28 MPa m(1/2) with the decreasing temperature from 293 to 77 K. Increasing fraction of transgranular fracture (from 7.3% at 293 K to 14.5% at 77 K) was proposed as a governing mechanism for toughness improvement at cryogenic temperatures based on the experimental observations. The effect of residual stresses on crack propagation was theoretically analyzed, considering energy release rates of intergranular and transgranular fractures. The variation of crack paths would contribute to the change of fracture modes and fracture toughness at cryogenic temperatures. (C) 2014 Elsevier Ltd and Techna Group S.r.l. All rights reserved.
引用
收藏
页码:13715 / 13718
页数:4
相关论文
共 50 条
  • [31] Effects of microstructures on the fracture properties of silicon nitride ceramics at elevated temperatures
    Cheng, Tianbao
    Lv, Jingwen
    Wu, Derong
    Wu, Danyan
    INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 2025, 22 (01)
  • [32] Fracture toughness improvement of polyurethane adhesive joints with chopped glass fibers at cryogenic temperatures
    Nam, Soohyun
    Yu, Young Ho
    Choi, Ilbeom
    Bang, Chang Seon
    Lee, Dai Gil
    COMPOSITE STRUCTURES, 2014, 107 : 522 - 527
  • [33] FRACTURE-TOUGHNESS OF AL-LI-X ALLOYS AT AMBIENT AND CRYOGENIC TEMPERATURES
    JATA, KV
    STARKE, EA
    SCRIPTA METALLURGICA, 1988, 22 (09): : 1553 - 1556
  • [34] FRACTURE-TOUGHNESS MEASUREMENT AT CRYOGENIC TEMPERATURES USING CHEVRON-NOTCHED SPECIMENS
    RAY, KK
    KUMAR, CS
    INTERNATIONAL JOURNAL OF FRACTURE, 1994, 69 (02) : R31 - R39
  • [35] Research Progress on the Transformation, Fracture Mechanism and Properties of Structural Ceramics at Cryogenic Temperatures
    Xue Wei-Jiang
    Xie Zhi-Peng
    JOURNAL OF INORGANIC MATERIALS, 2014, 29 (04) : 337 - 344
  • [36] Crack propagation in silicon nitride ceramics under various temperatures and grain boundary toughness
    Wei, Sai
    Porz, Lukas W.
    Xie, Zhipeng
    Liu, Bin
    Chen, Juan
    Xue, Weijiang
    Zhao, Jiamin
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015, 632 : 58 - 61
  • [37] Fracture toughness of structural ceramics
    Mukhopadhyay, AK
    Datta, SK
    Chakraborty, D
    CERAMICS INTERNATIONAL, 1999, 25 (05) : 447 - 454
  • [38] Fracture toughness and fracture mechanisms of Al-Al2O3 composites at cryogenic and elevated temperatures
    Poza, P
    Llorca, J
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1996, 206 (02): : 183 - 193
  • [39] Measurement of indentation fracture toughness of silicon nitride ceramics: I, effect of microstructure of materials
    Miyazaki, Hiroyuki
    Hyuga, Hideki
    Yoshizawa, Yu-Ichi
    Hirao, Kiyoshi
    Ohji, Tatsuki
    INNOVATION IN CERAMICS SCIENCE AND ENGINEERING, 2007, 352 : 41 - +
  • [40] Relationship between microstructure, toughening mechanisms, and fracture toughness of reinforced silicon nitride ceramics
    Inst fuer Werkstoffwissenschaft, Stuttgart, Germany
    J Am Ceram Soc, 10 (2619-2624):