Analysis of Unbalanced Magnetic Pull in Wound Rotor Induction Machines using Finite Element Analysis - Transient, Motoring and Generating Modes

被引：0
|
作者：
Dorrell, David G. [1 ]
Hermann, Alexander [2 ]
Jensen, Bogi Bech [2 ]
机构：
[1] Univ Technol Sydney, Sch Engn & Informat Technol, Sydney, NSW 2007, Australia
[2] Tech Univ Denmark, DTU Elecktro, Lyngby, Denmark
来源：
39TH ANNUAL CONFERENCE OF THE IEEE INDUSTRIAL ELECTRONICS SOCIETY (IECON 2013) | 2013年
关键词：
indiction machines; unbalanced magnetic pull; doubly fed induction generators; DFIGs;
D O I：
暂无
中图分类号：
TP [自动化技术、计算机技术];
学科分类号：
0812 ;
摘要：
there has been much literature on unbalanced magnetic pull in various types of electrical machine. This can lead to bearing wear and additional vibrations in the machine. In this paper a wound rotor induction is studied. Finite element analysis studies are conducted when the rotor has 10 % rotor eccentricity. The operating conditions are varied so that transient, motoring and doubly-fed induction generator modes are studied. This allows greater understanding of the radial forces involved. Wound rotor induction machines exhibit higher unbalanced magnetic pull than cage induction machines so this is an interesting aspect of their characteristic to address.
引用
收藏
页码：7307 / 7312
页数：6
相关论文
共 50 条
  • [31] Transient analysis of coaxial magnetic gears using finite element comodeling
    Chau, K. T.
    Zhang, Dong
    Jiang, J. Z.
    Jian, Linni
    JOURNAL OF APPLIED PHYSICS, 2008, 103 (07)
  • [32] STEADY-STATE ANALYSIS OF WOUND ROTOR INDUCTION MACHINES WITH SIMULTANEOUS STATOR AND OR ROTOR FAULTS
    TRUTT, FC
    ELECTRIC MACHINES AND POWER SYSTEMS, 1989, 16 (01): : 35 - 48
  • [33] Impedance Matrix Analysis Technique in Wound Rotor Induction Machines Including General Rotor Asymmetry
    Salah, Ahmad
    Guo, Youguang
    Dorrell, David
    PROCEEDINGS OF THE IECON 2016 - 42ND ANNUAL CONFERENCE OF THE IEEE INDUSTRIAL ELECTRONICS SOCIETY, 2016, : 1821 - 1826
  • [34] Finite element analysis of a modular brushless wound rotor synchronous machine
    Huong Thao Le Luong
    Henaux, Carole
    Messine, Frederuc
    Bueno-Mariani, Guilherme
    Voyer, Nicolas
    Mollov, Stefan
    JOURNAL OF ENGINEERING-JOE, 2019, (17): : 3521 - 3526
  • [35] Design and transient analysis of cage induction motor using finite element methods
    Singla, Bhoj Raj
    Marwaha, Sanjay
    Marwaha, Anupma
    2006 IEEE INTERNATIONAL CONFERENCE ON POWER ELECTRONIC, DRIVES AND ENERGY SYSTEMS, VOLS 1 AND 2, 2006, : 30 - +
  • [36] Fault Diagnosis of Broken Rotor Bars in Induction Motors Using Finite Element Analysis
    Mazouji, Rojan
    Khaloozadch, Hamid
    Arastch, Mohammad
    2020 11TH POWER ELECTRONICS, DRIVE SYSTEMS, AND TECHNOLOGIES CONFERENCE (PEDSTC), 2020,
  • [37] Calculation and Analysis of Unbalanced Magnetic Pull of Rotor under Motor Air Gap Eccentricity Fault
    Zhu, Rui
    Tong, Xin
    Han, Qingpeng
    He, Keyuan
    Wang, Xinrou
    Wang, Xuechao
    SUSTAINABILITY, 2023, 15 (11)
  • [38] Modeling and Analysis of Unbalanced Magnetic Pull in Cage Induction Motors With Curved Dynamic Eccentricity
    Di, Chong
    Bao, Xiaohua
    Wang, Hanfeng
    Lv, Qiang
    He, Yigang
    IEEE TRANSACTIONS ON MAGNETICS, 2015, 51 (08)
  • [39] Analysis of unbalanced magnetic pull in eccentric interior permanent magnet machines with series and parallel windings
    Jiang, James Weisheng
    Bilgin, Berker
    Sathyan, Anand
    Dadkhah, Hossein
    Emadi, Ali
    IET ELECTRIC POWER APPLICATIONS, 2016, 10 (06) : 526 - 538
  • [40] Detection of Winding Asymmetries in Wound-Rotor Induction Motors via Transient Analysis of the External Magnetic Field
    Zamudio-Ramirez, Israel
    Alfonso Antonino-Daviu, Jose
    Osornio-Rios, Roque A.
    de Jesus Romero-Troncoso, Rene
    Razik, Hubert
    IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2020, 67 (06) : 5050 - 5059
12345