Analysis of Unbalanced Magnetic Pull in Wound Rotor Induction Machines using Finite Element Analysis - Transient, Motoring and Generating Modes

被引：0
|
作者：
Dorrell, David G. [1 ]
Hermann, Alexander [2 ]
Jensen, Bogi Bech [2 ]
机构：
[1] Univ Technol Sydney, Sch Engn & Informat Technol, Sydney, NSW 2007, Australia
[2] Tech Univ Denmark, DTU Elecktro, Lyngby, Denmark
来源：
39TH ANNUAL CONFERENCE OF THE IEEE INDUSTRIAL ELECTRONICS SOCIETY (IECON 2013) | 2013年
关键词：
indiction machines; unbalanced magnetic pull; doubly fed induction generators; DFIGs;
D O I：
暂无
中图分类号：
TP [自动化技术、计算机技术];
学科分类号：
0812 ;
摘要：
there has been much literature on unbalanced magnetic pull in various types of electrical machine. This can lead to bearing wear and additional vibrations in the machine. In this paper a wound rotor induction is studied. Finite element analysis studies are conducted when the rotor has 10 % rotor eccentricity. The operating conditions are varied so that transient, motoring and doubly-fed induction generator modes are studied. This allows greater understanding of the radial forces involved. Wound rotor induction machines exhibit higher unbalanced magnetic pull than cage induction machines so this is an interesting aspect of their characteristic to address.
引用
收藏
页码：7307 / 7312
页数：6
相关论文
共 50 条
  • [21] The detection and suppression of Unbalanced Magnetic Pull in Wound Rotor Induction Motors Using Pole-Specific Search Coils and Auxiliary Windings
    Dorrell, David G.
    Salah, Ahmad
    Kayani, Obaid
    2015 IEEE ENERGY CONVERSION CONGRESS AND EXPOSITION (ECCE), 2015, : 277 - 284
  • [22] Numerical models for rotor cage induction machines using finite element method
    Boualem, B
    Piriou, F
    IEEE TRANSACTIONS ON MAGNETICS, 1998, 34 (05) : 3202 - 3205
  • [23] Faults Detection on a Wound Rotor Induction Machines by Principal Components Analysis
    Ramahaleomiarantsoa, Jacques Fanjason
    Heraud, Nicolas
    Sambatra, Eric Jean Roy
    Razafimahenina, Jean Marie
    PROCEEDINGS OF THE 2012 INTERNATIONAL CONFERENCE AND EXPOSITION ON ELECTRICAL AND POWER ENGINEERING (EPE 2012), 2012, : 894 - 899
  • [24] Analysis on Performance Characteristic of Wound Rotor Synchronous Generator by Finite Element Analysis
    Chang, Duk-Jin
    JOURNAL OF THE KOREAN MAGNETICS SOCIETY, 2019, 29 (03): : 79 - 90
  • [25] Transient Analysis of Wound Rotor Synchronous Motor Synchronisation Using Finite Elements Method
    Chiver, Olivian
    Neamt, Liviu
    Pop, Eleonora
    PROCEEDINGS OF THE 2016 INTERNATIONAL CONFERENCE AND EXPOSITION ON ELECTRICAL AND POWER ENGINEERING (EPE 2016), 2016, : 225 - 228
  • [26] Analysis of rotor fault detection in inverter fed induction machines at no load by means of finite element method
    Samonig, M. A.
    Nussbaumer, P.
    Stojicic, G.
    Wolbank, Th M.
    IECON 2011: 37TH ANNUAL CONFERENCE ON IEEE INDUSTRIAL ELECTRONICS SOCIETY, 2011, : 1758 - 1763
  • [27] Modelling skewed rotor slots within two-dimensional finite element analysis of induction machines
    Tenhunen, A.
    Acta Polytechnica Scandinavica, Electrical Engineering, 2000, (102): : 2 - 70
  • [28] Finite-element analysis of unbalanced magnetic pull in a large hydro-generator under practical operations
    Wang, Lin
    Cheung, Richard W.
    Ma, Zhiyun
    Ruan, Jiangjun
    Peng, Ying
    IEEE TRANSACTIONS ON MAGNETICS, 2008, 44 (06) : 1558 - 1561
  • [29] Unbalanced Magnetic Pull Effect on Stiffness Models of Active Magnetic Bearing due to Rotor Eccentricity in Brushless DC Motor Using Finite Element Method
    Han, Bangcheng
    Zheng, Shiqiang
    Liu, Xiquan
    MATHEMATICAL PROBLEMS IN ENGINEERING, 2013, 2013
  • [30] Complex finite element analysis of a solid rotor induction motor
    Ibtiouen, R
    Kechroud, R
    Touhami, O
    Mekhtoub, S
    IEEE IEMDC'03: IEEE INTERNATIONAL ELECTRIC MACHINES AND DRIVES CONFERENCE, VOLS 1-3, 2003, : 1606 - 1610
12345