Experimental study on microstructure and mechanical properties of AA6061/Ti-6Al-4V joints made by bypass-current MIG welding-brazing

被引：32
|
作者：
Miao, Yugang [1 ]
Ma, Zhaowei [1 ]
Yang, Xiaoshan [1 ]
Liu, Ji [1 ]
Han, Duanfeng [1 ]
机构：
[1] Harbin Engn Univ, Natl Key Lab Sci & Technol Underwater Vehicle, Harbin 150001, Heilongjiang, Peoples R China
来源：
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY | 2018年 / 260卷
基金：
中国国家自然科学基金;
关键词：
BC-MIG welding-brazing; Dissimilar alloys; Reaction layer; Tensile-shear strength; HEAT INPUT; BEHAVIOR; ALUMINUM; ALLOYS;
D O I：
10.1016/j.jmatprotec.2018.05.019
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Microstructure and mechanical properties of Bypass-Current Metal Inert Gas (BC-MIG) welded AA6061/Ti6Al4V lap joint were studied. Due to the influence of bypass current, the heat input acting on base metal was reduced, the melting efficiency of filler wire was increased, and the metal transfer mode was changed from short circuiting transfer to projected transfer, which creates an improvement in wettability and spreading behavior of weld. Reliable Al/Ti joints were obtained by BC-MIG welding-brazing, and the tensile-shear strength of as received joint could reach a maximum of 190 M Pa, which was about 96% of AA6061 base metal. The metallurgical bonding between Al alloy and Ti alloy was a continuous reaction layer, and the intermetallic compounds (IMCs) consisted of TiAl3 and TiAl. The formation and growth of interface were discussed by melt flow.
引用
收藏
页码：104 / 111
页数：8
相关论文
共 50 条
  • [41] Diffusion brazing of Ti-6Al-4V and AISI 304: an EBSD study and mechanical properties
    Norouzi, Ehsan
    Shamanian, Morteza
    Atapour, Masoud
    Khosravi, Babak
    JOURNAL OF MATERIALS SCIENCE, 2017, 52 (20) : 12467 - 12475
  • [42] Microstructure and mechanical properties of friction stir lap AA6061-Ti6Al4V welds
    Yu, Mingrun
    Zhao, Hongyun
    Jiang, Zhihua
    Guo, Fan
    Zho, Li
    Song, Xiaoguo
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2019, 270 : 274 - 284
  • [43] Joining of AA 6061/Ti-6Al-4V with zinc interlayer using friction welding process
    Velu, P. Shenbaga
    Hynes, N. Rajesh Jesudoss
    Vignesh, N. J.
    JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2019, 41 (12)
  • [44] An investigation on butt joints of Ti6Al4V and 5A06 using MIG/TIG double-side arc welding-brazing
    Zhang, Yufeng
    Huang, Jihua
    Ye, Zheng
    Cheng, Zhi
    JOURNAL OF MANUFACTURING PROCESSES, 2017, 27 : 221 - 225
  • [45] Microstructure and mechanical properties of highly deformed Ti-6Al-4V
    Gungor, MN
    Ucok, I
    Kramer, LS
    Dong, H
    Martin, NR
    Tack, WT
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2005, 410 : 369 - 374
  • [46] Flexible control of the microstructure and mechanical properties of friction stir welded Ti-6Al-4V joints
    Kitamura, K.
    Fujii, H.
    Iwata, Y.
    Sun, Y. S.
    Morisada, Y.
    MATERIALS & DESIGN, 2013, 46 : 348 - 354
  • [47] Butt Laser Welding-Brazing of AZ31 Mg to Nickel-Coated Ti-6Al-4V
    Wu, Laijun
    Yang, Jia
    Zang, Chengwei
    Tan, Caiwang
    Zhang, Zequn
    Zhao, Xiaoye
    Chen, Bo
    Song, Xiaoguo
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2019, 28 (07) : 4443 - 4453
  • [48] Influence of current pulsing on microstructure and mechanical properties of Ti-6Al-4V TIG weldments
    Babu, N. Kishore
    Raman, S. Ganesh Sundara
    SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2006, 11 (04) : 442 - 447
  • [49] Friction stir welding of Ti-6Al-4V alloy: Friction tool, microstructure, and mechanical properties
    Li, Junping
    Shen, Yifu
    Hou, Wentao
    Qi, Yiming
    JOURNAL OF MANUFACTURING PROCESSES, 2020, 58 : 344 - 354
  • [50] Microstructure evolution and mechanical properties of wrought/wire arc additive manufactured Ti-6Al-4V joints by electron beam welding
    Xu, Mingfang
    Chen, Yuhua
    Zhang, Timing
    Xie, Jilin
    Wang, Shanlin
    Yin, Limeng
    He, Peng
    MATERIALS CHARACTERIZATION, 2022, 190
12345