Experimental study on microstructure and mechanical properties of AA6061/Ti-6Al-4V joints made by bypass-current MIG welding-brazing

被引：32
|
作者：
Miao, Yugang [1 ]
Ma, Zhaowei [1 ]
Yang, Xiaoshan [1 ]
Liu, Ji [1 ]
Han, Duanfeng [1 ]
机构：
[1] Harbin Engn Univ, Natl Key Lab Sci & Technol Underwater Vehicle, Harbin 150001, Heilongjiang, Peoples R China
来源：
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY | 2018年 / 260卷
基金：
中国国家自然科学基金;
关键词：
BC-MIG welding-brazing; Dissimilar alloys; Reaction layer; Tensile-shear strength; HEAT INPUT; BEHAVIOR; ALUMINUM; ALLOYS;
D O I：
10.1016/j.jmatprotec.2018.05.019
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Microstructure and mechanical properties of Bypass-Current Metal Inert Gas (BC-MIG) welded AA6061/Ti6Al4V lap joint were studied. Due to the influence of bypass current, the heat input acting on base metal was reduced, the melting efficiency of filler wire was increased, and the metal transfer mode was changed from short circuiting transfer to projected transfer, which creates an improvement in wettability and spreading behavior of weld. Reliable Al/Ti joints were obtained by BC-MIG welding-brazing, and the tensile-shear strength of as received joint could reach a maximum of 190 M Pa, which was about 96% of AA6061 base metal. The metallurgical bonding between Al alloy and Ti alloy was a continuous reaction layer, and the intermetallic compounds (IMCs) consisted of TiAl3 and TiAl. The formation and growth of interface were discussed by melt flow.
引用
收藏
页码：104 / 111
页数：8
相关论文
共 50 条
  • [21] Influence of Zr addition on TIG welding-brazing of Ti-6Al-4V to Al5A06
    Lv, Shixiong
    Cui, Qinglong
    Huang, Yongxian
    Jing, Xiaojun
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 568 : 150 - 154
  • [22] Effects of ultrasonic vibration on residual stress distribution and local mechanical properties of AA6061/Ti6Al4V dissimilar joints by resistance spot welding
    He, Mohan
    Wang, Qian
    He, Yingjun
    Wang, Jinxiang
    Ma, Ninshu
    Wang, Yuanxun
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2024, 33 : 1322 - 1333
  • [23] Experimental study of mechanical properties of AA6061 and AA7075 alloy joints using friction stir welding
    Amuthan, Tamilselvan
    Nagaprasad, Nagaraj
    Krishnaraj, Ramaswamy
    Narasimharaj, Venugopal
    Stalin, B.
    Vignesh, Venkataraman
    MATERIALS TODAY-PROCEEDINGS, 2021, 47 : 4330 - 4335
  • [24] Process of welding-brazing and interface analysis of lap joint Ti-6Al-4V and aluminum by plasma arc welding
    Huang, Jiankang
    Liu, Yulong
    Liu, Shien
    Guan, Zhichen
    Yu, Xiaoquan
    Wu, Haosheng
    Yu, Shurong
    Fan, Ding
    JOURNAL OF MANUFACTURING PROCESSES, 2021, 61 : 396 - 407
  • [25] Microstructure and mechanical properties of TC4/6061 and TC4/2024 dissimilar joints by autogenous laser welding-brazing
    Wang, Zhiwei
    Shen, Junqi
    Hu, Shengsun
    Yin, Chengxuan
    Bu, Xianzheng
    OPTICS AND LASER TECHNOLOGY, 2022, 149
  • [26] Numerical Simulation of Temperature Distribution and Residual Stress in Laser Beam Welding AA6061 and Ti-6Al-4V and Optimization of Welding Processes
    Merga, Alemu
    Gutema, Endalkachew Mosisa
    Gopal, Mahesh
    Lemu, Hirpa G.
    RECENT ADVANCES IN ELECTRICAL & ELECTRONIC ENGINEERING, 2024,
  • [27] High Temperature Mechanical Properties and Microstructure Evolution of Ti-6Al-4V Alloy Linear Friction Welding Joints
    Zhang, Chen
    Li, Dongsheng
    Li, Xiaoqiang
    Li, Yong
    Xia, Qin
    MACHINES, 2022, 10 (02)
  • [28] Correlation of microstructure with mechanical properties of TIG weldments of Ti-6Al-4V made with and without current pulsing
    Babu, N. Kishore
    Raman, S. Ganesh Sundara
    Mythili, R.
    Saroja, S.
    MATERIALS CHARACTERIZATION, 2007, 58 (07) : 581 - 587
  • [29] Effect of Welding Parameters on Friction Stir Welded Ti-6Al-4V Joints: Temperature, Microstructure and Mechanical Properties
    Li, Junping
    Cao, Fujun
    Shen, Yifu
    METALS, 2020, 10 (07) : 1 - 15
  • [30] Influence of welding parameters on the IMCs and the mechanical properties of Ti/Al butt joints welded by MIG/TIG double-sided arc welding-brazing
    Zhang, Yufeng
    Huang, Jihua
    Ye, Zheng
    Cheng, Zhi
    Yang, Jian
    Chen, Shuhai
    JOURNAL OF ALLOYS AND COMPOUNDS, 2018, 747 : 764 - 771
12345