Internal heat integrated distillation columns (iHIDiCs)-New systematic design methodology

被引:42
|
作者
Gadalla, Mamdouh A. [1 ]
机构
[1] Univ Rovira & Virgili, Dept Engn Quim, Tarragona 43007, Spain
来源
CHEMICAL ENGINEERING RESEARCH & DESIGN | 2009年 / 87卷 / 12A期
关键词
Heat integration; Distillation; Process intensification; HIDiC; Temperature profiles; Design feasibility; Hydraulics;
D O I
10.1016/j.cherd.2009.06.005
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
Distillation of close-boiling mixtures, such as propylene-propane and ethyl benzene-styrene systems, is an energy intensive process. Vapor recompression techniques and heat pumping-assisted columns have been adopted for such applications for their high potential of energy savings. In direct vapor recompression columns, the vapors leaving the top of the column are compressed, and in the reboiler of the same column, these vapors are condensed to provide heat for vapor generation. Internal heat integrated distillation columns or iHIDiCs are new developments employing the same concept of vapor recompression. These new column configurations can have significantly lower energy demands than common vapor recompression units. In iHIDiCs, rectifying section is operated at a higher pressure (i.e. higher temperature) than in stripping, and therefore its heat can be used to generate vapor in stripping section. So far, design of these column configurations is performed based on engineering experience, simulation or experimental studies on given cases, including dynamic control simulations. Within previous and most recent research efforts on iHIDiCs, there exist no generalized design methods or systematic approaches for design of these internal integrated distillation columns. The present paper presents a systematic design procedure for iHIDiCs. A design hierarchy for iHIDiCs is developed, which includes two phases of design, thermodynamic and hydraulics. This design procedure is applied using commercial simulation-based design methods. In thermodynamic design, temperature profiles for column sections are used as a design tool to guide designers. On the other hand, hydraulic capacities of stages for heat exchange are analyzed to determine the maximum physical space area available for heat exchange. Hence, feasibility regions for both heat integration and hydraulic design are identified. (C) 2009 The Institution of Chemical Engineers. Published by Elsevier B.V All rights reserved.
引用
收藏
页码:1658 / 1666
页数:9
相关论文
共 50 条
  • [31] Heat Integrated Distillation System Design
    Smith, Robin
    Jobson, Megan
    Chen, Lu
    Farrokhpanah, Sonia
    PRES 2010: 13TH INTERNATIONAL CONFERENCE ON PROCESS INTEGRATION, MODELLING AND OPTIMISATION FOR ENERGY SAVING AND POLLUTION REDUCTION, 2010, 21 : 19 - 24
  • [32] Integrated Process Design and Control of Cyclic Distillation Columns
    Andersen, Bastian B.
    Nielsen, Rasmus F.
    Udugama, Isuru A.
    Papadakis, Emmanouil
    Gernaey, Krist V.
    Huusom, Jakob K.
    Mansouri, Seyed Soheil
    Abildskov, Jens
    IFAC PAPERSONLINE, 2018, 51 (18): : 542 - 547
  • [33] DESIGN OF AN EXPERIMENTAL SET-UP FOR PERFORMANCE ASSESSMENT OF HEAT INTEGRATED AIR DISTILLATION COLUMNS
    Van der Ham, L. V.
    Drescher, M.
    Kjelstrup, S.
    23RD IIR INTERNATIONAL CONGRESS OF REFRIGERATION, 2011, 23 : 637 - +
  • [34] A DESIGN PROCEDURE AND DISTILLATION CHARACTERISTICS FOR A SELF-REFLUX INTERNAL HEAT-INTEGRATED DISTILLATION SYSTEM WITH A HEAT-PUMP
    TOMISAKA, Y
    TANAKA, Y
    NAKANISHI, E
    KAGAKU KOGAKU RONBUNSHU, 1991, 17 (05) : 924 - 930
  • [35] Retrofit of heat-integrated crude oil distillation columns
    Enriquez-Gutierrez, V. M.
    Jobson, M.
    Ochoa-Estopier, L. M.
    Smith, R.
    CHEMICAL ENGINEERING RESEARCH & DESIGN, 2015, 99 : 185 - 198
  • [36] Dynamics and control of high purity heat integrated distillation columns
    Zhu, Y
    Liu, XG
    INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 2005, 44 (23) : 8806 - 8814
  • [37] HEAT-INTEGRATED DISTILLATION-COLUMNS FOR TERNARY SEPARATIONS
    CHENG, HC
    LUYBEN, WL
    INDUSTRIAL & ENGINEERING CHEMISTRY PROCESS DESIGN AND DEVELOPMENT, 1985, 24 (03): : 707 - 713
  • [38] Parameter analysis and optimization of ideal heat integrated distillation columns
    Nakaiwa, H
    Huang, K
    Naito, K
    Endo, A
    Akiya, T
    Nakane, T
    Takamatsu, T
    COMPUTERS & CHEMICAL ENGINEERING, 2001, 25 (4-6) : 737 - 744
  • [39] Modeling and analysis of conventional and heat-integrated distillation columns
    Bisgaard, Thomas
    Huusom, Jakob Kjobsted
    Abildskov, Jens
    AICHE JOURNAL, 2015, 61 (12) : 4251 - 4263
  • [40] MODELING AND CONTROL OF HEAT INTEGRATED DISTILLATION COLUMNS: A CASE STUDY
    Manzo, Fabiana
    Tzouanas, Vassilios
    Barbieri, Enrique
    2012 ASEE ANNUAL CONFERENCE, 2012,