Internal heat integrated distillation columns (iHIDiCs)-New systematic design methodology

被引:42
|
作者
Gadalla, Mamdouh A. [1 ]
机构
[1] Univ Rovira & Virgili, Dept Engn Quim, Tarragona 43007, Spain
来源
CHEMICAL ENGINEERING RESEARCH & DESIGN | 2009年 / 87卷 / 12A期
关键词
Heat integration; Distillation; Process intensification; HIDiC; Temperature profiles; Design feasibility; Hydraulics;
D O I
10.1016/j.cherd.2009.06.005
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
Distillation of close-boiling mixtures, such as propylene-propane and ethyl benzene-styrene systems, is an energy intensive process. Vapor recompression techniques and heat pumping-assisted columns have been adopted for such applications for their high potential of energy savings. In direct vapor recompression columns, the vapors leaving the top of the column are compressed, and in the reboiler of the same column, these vapors are condensed to provide heat for vapor generation. Internal heat integrated distillation columns or iHIDiCs are new developments employing the same concept of vapor recompression. These new column configurations can have significantly lower energy demands than common vapor recompression units. In iHIDiCs, rectifying section is operated at a higher pressure (i.e. higher temperature) than in stripping, and therefore its heat can be used to generate vapor in stripping section. So far, design of these column configurations is performed based on engineering experience, simulation or experimental studies on given cases, including dynamic control simulations. Within previous and most recent research efforts on iHIDiCs, there exist no generalized design methods or systematic approaches for design of these internal integrated distillation columns. The present paper presents a systematic design procedure for iHIDiCs. A design hierarchy for iHIDiCs is developed, which includes two phases of design, thermodynamic and hydraulics. This design procedure is applied using commercial simulation-based design methods. In thermodynamic design, temperature profiles for column sections are used as a design tool to guide designers. On the other hand, hydraulic capacities of stages for heat exchange are analyzed to determine the maximum physical space area available for heat exchange. Hence, feasibility regions for both heat integration and hydraulic design are identified. (C) 2009 The Institution of Chemical Engineers. Published by Elsevier B.V All rights reserved.
引用
收藏
页码:1658 / 1666
页数:9
相关论文
共 50 条
  • [21] On the startup of ideal heat integrated distillation columns (HIDiC)
    Huang, KJ
    Nakaiwa, M
    Naito, K
    Endo, A
    Owa, M
    Akiya, T
    Nakane, T
    Takamatsu, T
    JOURNAL OF CHEMICAL ENGINEERING OF JAPAN, 2000, 33 (03) : 533 - 537
  • [22] Operation cost optimization of heat integrated distillation columns
    Liu, Xinggao
    Wu, Mingguang
    WCICA 2006: SIXTH WORLD CONGRESS ON INTELLIGENT CONTROL AND AUTOMATION, VOLS 1-12, CONFERENCE PROCEEDINGS, 2006, : 1866 - +
  • [23] Energy savings in heat-integrated distillation columns
    Nakaiwa, M
    Huang, K
    Owa, M
    Akiya, T
    Nakane, T
    Sato, M
    Takamatsu, T
    ENERGY, 1997, 22 (06) : 621 - 625
  • [24] A fixed point methodology for the design of reactive distillation columns
    Li, Hong
    Meng, Ying
    Li, Xingang
    Gao, Xin
    CHEMICAL ENGINEERING RESEARCH & DESIGN, 2016, 111 : 479 - 491
  • [25] Internally heat-integrated distillation columns: A review
    Nakaiwa, M
    Huang, K
    Endo, A
    Ohmori, T
    Akiya, T
    Takamatsu, T
    CHEMICAL ENGINEERING RESEARCH & DESIGN, 2003, 81 (A1): : 162 - 177
  • [26] Approximate design and cost evaluation of internally heat-integrated distillation columns (HIDiCs)
    Young Han Kim
    Korean Journal of Chemical Engineering, 2012, 29 : 1004 - 1009
  • [28] Towards further internal heat integration in design of reactive distillation columns - Part I: The design principle
    Huang, KJ
    Iwakabe, K
    Nakaiwa, M
    Tsutsumb, A
    CHEMICAL ENGINEERING SCIENCE, 2005, 60 (17) : 4901 - 4914
  • [29] Systematic design of the integrating heat pump into heat integrated distillation column for recovering energy
    Li, Hong
    Cong, Haifeng
    Li, Xuan
    Li, Xingang
    Gao, Xin
    APPLIED THERMAL ENGINEERING, 2016, 105 : 93 - 104
  • [30] MODELING AND DESIGN METHOD FOR INTERNAL HEAT-INTEGRATED PACKED DISTILLATION COLUMN
    TAKAMATSU, T
    LUEPRASITSAKUL, V
    NAKAIWA, M
    JOURNAL OF CHEMICAL ENGINEERING OF JAPAN, 1988, 21 (06) : 595 - 601