Internal heat integrated distillation columns (iHIDiCs)-New systematic design methodology

被引:42
|
作者
Gadalla, Mamdouh A. [1 ]
机构
[1] Univ Rovira & Virgili, Dept Engn Quim, Tarragona 43007, Spain
来源
CHEMICAL ENGINEERING RESEARCH & DESIGN | 2009年 / 87卷 / 12A期
关键词
Heat integration; Distillation; Process intensification; HIDiC; Temperature profiles; Design feasibility; Hydraulics;
D O I
10.1016/j.cherd.2009.06.005
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
Distillation of close-boiling mixtures, such as propylene-propane and ethyl benzene-styrene systems, is an energy intensive process. Vapor recompression techniques and heat pumping-assisted columns have been adopted for such applications for their high potential of energy savings. In direct vapor recompression columns, the vapors leaving the top of the column are compressed, and in the reboiler of the same column, these vapors are condensed to provide heat for vapor generation. Internal heat integrated distillation columns or iHIDiCs are new developments employing the same concept of vapor recompression. These new column configurations can have significantly lower energy demands than common vapor recompression units. In iHIDiCs, rectifying section is operated at a higher pressure (i.e. higher temperature) than in stripping, and therefore its heat can be used to generate vapor in stripping section. So far, design of these column configurations is performed based on engineering experience, simulation or experimental studies on given cases, including dynamic control simulations. Within previous and most recent research efforts on iHIDiCs, there exist no generalized design methods or systematic approaches for design of these internal integrated distillation columns. The present paper presents a systematic design procedure for iHIDiCs. A design hierarchy for iHIDiCs is developed, which includes two phases of design, thermodynamic and hydraulics. This design procedure is applied using commercial simulation-based design methods. In thermodynamic design, temperature profiles for column sections are used as a design tool to guide designers. On the other hand, hydraulic capacities of stages for heat exchange are analyzed to determine the maximum physical space area available for heat exchange. Hence, feasibility regions for both heat integration and hydraulic design are identified. (C) 2009 The Institution of Chemical Engineers. Published by Elsevier B.V All rights reserved.
引用
收藏
页码:1658 / 1666
页数:9
相关论文
共 50 条
  • [1] A design method for internal heat integrated distillation columns (iHIDiCs)
    Gadalla, Mamdouh
    Olujic, Zarko
    Jimenez Esteller, Laureano
    Guillen-Gosalbez, Gonzalo
    17TH EUROPEAN SYMPOSIUM ON COMPUTER AIDED PROCESS ENGINEERING, 2007, 24 : 1041 - 1046
  • [2] Modeling and Analysis of Internal Heat Integrated Distillation Columns
    黄克谨
    战德志
    中岩勝
    中根尧
    高松武一郎
    ChineseJournalofChemicalEngineering, 1999, (01) : 71 - 80
  • [3] Modeling and analysis of internal heat integrated distillation columns
    Huang, KJ
    Zhan, DZ
    Masaru, N
    Takashi, N
    Takeichiro, T
    CHINESE JOURNAL OF CHEMICAL ENGINEERING, 1999, 7 (01) : 67 - 76
  • [4] A new approach to the design of internally heat-integrated tray distillation columns
    Gadalla, M
    Olujic, Z
    de Rijke, A
    Jansens, PJ
    European Symposium on Computer-Aided Process Engineering-15, 20A and 20B, 2005, 20a-20b : 805 - 810
  • [5] Heat-integrated distillation columns: Vapor recompression or internal heat integration?
    Harwardt, Andreas
    Marquardt, Wolfgang
    AICHE JOURNAL, 2012, 58 (12) : 3740 - 3750
  • [6] Heat integrated process design for pressure swing distillation columns
    Iqbal, Asma
    Ahmad, Syed Akhlaq
    INDIAN JOURNAL OF CHEMICAL TECHNOLOGY, 2019, 26 (05) : 449 - 453
  • [7] A new Design Methodology for Heat Integrated Distillation Column Based on Self-Heat Recuperation
    Kansha, Yasuki
    Kishimoto, Akira
    Tsutsumi, Atsushi
    PRES 2010: 13TH INTERNATIONAL CONFERENCE ON PROCESS INTEGRATION, MODELLING AND OPTIMISATION FOR ENERGY SAVING AND POLLUTION REDUCTION, 2010, 21 : 43 - 48
  • [8] A new configuration of ideal heat integrated distillation columns (HIDiC)
    Nakaiwa, M
    Huang, K
    Naito, K
    Endo, A
    Owa, M
    Akiya, T
    Nakane, T
    Takamatsu, T
    COMPUTERS & CHEMICAL ENGINEERING, 2000, 24 (2-7) : 239 - 245
  • [9] METHODOLOGY FOR DESIGN, ANALYSIS AND THERMODYNAMIC OPTIMIZATION OF DISTILLATION COLUMNS WITH INTERNAL BEAT EXCHANGERS
    Mendoza, D. F.
    Riascos, C. A. M.
    REVISTA MEXICANA DE INGENIERIA QUIMICA, 2015, 14 (02): : 523 - 542
  • [10] A Design methodology for Internally Heat-Integrated Distillation Columns (IHIDiC) with side condensers and side reboilers (SCSR)
    Maddu, Sankari
    Malik, Ranjan K.
    21ST EUROPEAN SYMPOSIUM ON COMPUTER AIDED PROCESS ENGINEERING, 2011, 29 : 412 - 416