Silicon Carbide (SiC) Effect on Mechanical Properties and Corrosion Rates on Composite Al/SiC and Al-Cu/SiC

被引：0

作者：

Anggara, B. S. ^{[1
]}

Fahdiran, Riser ^{[1
]}

Marpaung, Mangasi A. ^{[1
]}

Soegijono, Bambang ^{[2
]}

机构：

[1] Univ Negeri Jakarta, Jurusan Fis, FMIPA, Jakarta 13220, Indonesia

[2] Univ Indonesia, FMIPA, Dept Fis, PPS Ilmu Bahan Bahan, Depok, Indonesia

来源：

8TH NATIONAL PHYSICS SEMINAR 2019 | 2019年 / 2169卷

关键词：

D O I：

10.1063/1.5132691

中图分类号：

G40 [教育学];

学科分类号：

040101 ; 120403 ;

摘要：

The preparation of Metal Matrix Composite (MMCs) Al/SiCp and Al-Cu/SiCp with the addition of silicon carbide powder (SiCp) and mixing with the hot sterring method has been done successfully. Material Al and Al-Cu melted in the temperature of 900(0)C then added SiC with variations (1, 2, 3, 4) weight % with the method of hot sterring. Microstructural observation with SEM shows both Al/SiCp and Al-Cu/SiCp grain boundaries are not obvious. Testing tensile test showed that the addition of Cu make Yield Stress tends to increase. While the corrosion rate of Al-Cu/SiCp is smaller when compared to Al/SiCp. Meaning Al/SiCp tends to be more corrosive when compared to Al-Cu/SiCp.

引用

页数：4

共 50 条

[41] Microstructure and mechanical properties of SiC/Al nanocomposite
Gu Wanli
Sun Ming
Wang Xinguang
Sheng Wenbin
Zhu Guangming
NANO-SCALE AND AMOURPHOUS MATERIALS, 2011, 688 : 158 - 161
[42] Microstructure and mechanical properties of Al – Zn – Mg – Cu/SiC composite after heat treatment
Y. P. Sun
H. G. Yan
Z. H. Chen
Metal Science and Heat Treatment, 2009, 51
[43] Effects of volume fraction of SiC particles on mechanical properties of SiC/Al composites
宋旼
Transactions of Nonferrous Metals Society of China, 2009, 19 (06) : 1400 - 1404
[44] Mechanical properties of 2014Al/SiC composites with oxidized SiC particles
Jong-Hoon Jeong
Youngman Kim
Jae-Chul Lee
Metallurgical and Materials Transactions A, 2003, 34 : 1361 - 1369
[45] Mechanical properties of (SiC)p/Al composite fabricated by sheath rolling
Lee, SH
Sakai, T
Saito, Y
MATERIALS TRANSACTIONS JIM, 2000, 41 (02): : 256 - 263
[46] MICROSTRUCTURE AND MECHANICAL-PROPERTIES OF SIC/AL COMPOSITE-MATERIALS
KOHYAMA, A
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1985, 71 (05): : S761 - S761
[47] Mechanical properties of 2014Al/SiC composites with oxidized SiC particles
Jeong, JH
Kim, Y
Lee, JC
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2003, 34A (06): : 1361 - 1369
[48] Effect of SiC Deposition Behavior on Microstructure and Mechanical Properties of Cold-Sprayed Al5056/SiC Composite Coatings
Zhang, Hongyu
Yu, Min
Liang, Chunming
Chen, Hui
JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2021, 30 (05) : 1262 - 1273
[49] Effects of volume fraction of SiC particles on mechanical properties of SiC/Al composites
Song Min
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2009, 19 (06) : 1400 - 1404
[50] MICROSTRUCTURE, CORROSION AND WEAR BEHAVIOUR OF UFG-POWDER-METALLURGICAL Al-Cu ALLOYS, Al-Cu/Al2O3(p) AND Al-Cu/SiC(p) COMPOSITES
Nickel, D.
Alisch, G.
Podlesak, H.
Hockauf, M.
Fritsche, G.
Lampke, T.
REVIEWS ON ADVANCED MATERIALS SCIENCE, 2010, 25 (03) : 261 - 269

← 1 2 3 4 5 →