Silicon Carbide (SiC) Effect on Mechanical Properties and Corrosion Rates on Composite Al/SiC and Al-Cu/SiC

被引：0
|
作者：
Anggara, B. S. [1 ]
Fahdiran, Riser [1 ]
Marpaung, Mangasi A. [1 ]
Soegijono, Bambang [2 ]
机构：
[1] Univ Negeri Jakarta, Jurusan Fis, FMIPA, Jakarta 13220, Indonesia
[2] Univ Indonesia, FMIPA, Dept Fis, PPS Ilmu Bahan Bahan, Depok, Indonesia
来源：
8TH NATIONAL PHYSICS SEMINAR 2019 | 2019年 / 2169卷
关键词：
D O I：
10.1063/1.5132691
中图分类号：
G40 [教育学];
学科分类号：
040101 ; 120403 ;
摘要：
The preparation of Metal Matrix Composite (MMCs) Al/SiCp and Al-Cu/SiCp with the addition of silicon carbide powder (SiCp) and mixing with the hot sterring method has been done successfully. Material Al and Al-Cu melted in the temperature of 900(0)C then added SiC with variations (1, 2, 3, 4) weight % with the method of hot sterring. Microstructural observation with SEM shows both Al/SiCp and Al-Cu/SiCp grain boundaries are not obvious. Testing tensile test showed that the addition of Cu make Yield Stress tends to increase. While the corrosion rate of Al-Cu/SiCp is smaller when compared to Al/SiCp. Meaning Al/SiCp tends to be more corrosive when compared to Al-Cu/SiCp.
引用
收藏
页数：4
相关论文
共 50 条
  • [31] Influence of chemical and physical properties of the last generation of silicon carbide fibres on the mechanical behaviour of SiC/SiC composite
    Buet, E.
    Sauder, C.
    Poissonnet, S.
    Brender, P.
    Gadiou, R.
    Vix-Guterl, C.
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2012, 32 (03) : 547 - 557
  • [32] Influence of mechanical milling on the SiC particulate size in an Al-SiC composite
    Mujahid, M
    Friska, L
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2005, 14 (01) : 69 - 74
  • [33] Influence of mechanical milling on the SiC particulate size in an Al-SiC composite
    M. Mujahid
    I. Friska
    Journal of Materials Engineering and Performance, 2005, 14 : 69 - 74
  • [34] The tribological properties of Ti3SiC2/Cu/Al/SiC composite at elevated temperatures
    Dang, Wentao
    Ren, Shufang
    Zhou, Jiansong
    Yu, Youjun
    Wang, Lingqian
    TRIBOLOGY INTERNATIONAL, 2016, 104 : 294 - 302
  • [35] PRODUCTION OF COMPOSITE 2024 Al-SiC AND 6060 Al-SiC POWDERS BY THE MECHANICAL ALLOYING
    Kaczmar, Jacek W.
    Kurzawa, Adam
    Janus, Andrzej
    COMPOSITES THEORY AND PRACTICE, 2005, 5 (04): : 61 - 66
  • [36] Effect of SiC on the corrosion resistance of electroless Cu–P–SiC composite coating
    Soheila Faraji
    Afidah Abdul Rahim
    Norita Mohamed
    Coswald Stephen Sipaut
    Journal of Coatings Technology and Research, 2012, 9 : 115 - 124
  • [37] Development of a novel 6351 Al-(Al4SiC4+SiC) hybrid composite with enhanced mechanical properties
    Show, Bijay Kumar
    Mondal, Dipak Kumar
    Biswas, Koushik
    Maity, Joydeep
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 579 : 136 - 149
  • [38] Mechanical properties of SiC/SiC composite with magnesium-silicon oxide interphase
    Igawa, N.
    Taguchi, T.
    Yamada, R.
    Ishii, Y.
    Jitsukawa, S.
    JOURNAL OF NUCLEAR MATERIALS, 2007, 367 : 725 - 729
  • [39] Structure and properties of the Al/SiC composite material
    Pugacheva, N. B.
    Michurov, N. S.
    Bykova, T. M.
    PHYSICS OF METALS AND METALLOGRAPHY, 2016, 117 (06): : 634 - 640
  • [40] Structure and properties of the Al/SiC composite material
    N. B. Pugacheva
    N. S. Michurov
    T. M. Bykova
    The Physics of Metals and Metallography, 2016, 117 : 634 - 640
12345