Microstructure and thermal stability of Ti1-xAlxN coatings deposited by reactive magnetron co-sputtering

被引：19

作者：

Du, Miao ^{[1
]}

Hao, Lei ^{[1
]}

Liu, Xiaopeng ^{[1
]}

Jiang, Lijun ^{[1
]}

Wang, Shumao ^{[1
]}

Lv, Fang ^{[1
]}

Li, Zhinian ^{[1
]}

Mi, Jing ^{[1
]}

机构：

[1] Gen Res Inst Nonferrous Met, Dept Energy Mat & Technol, Beijing 100088, Peoples R China

来源：

PROCEEDING OF THE FOURTH INTERNATIONAL CONFERENCE ON SURFACE AND INTERFACE SCIENCE AND ENGINEERING | 2011年 / 18卷

关键词：

Ti(1-x)Al(x)N coating; magnetron co-sputtering; microstructure; thermal stability; AL-N COATINGS; TANDEM ABSORBER; FILMS; TIALN;

D O I：

10.1016/j.phpro.2011.06.085

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Ti(1-x)Al(x)N (0.25 <= x <= 0.75) coatings were deposited by reactive DC/RF magnetron co-sputtering. The phase structure, microstructure, surface roughness and chemical composition were investigated. The anti-oxidation behavior of coatings at high temperature was also studied. It has been shown that the coatings with high Al content (x >= 0.67) consisted of hexagonal-AlN and cubic-TiAlN phases, while it has cubic-TiAlN phase for the coatings with low Al content (x<0.67). The roughness of surface of coatings was 1.89 similar to 4.80nm and it decreased with increasing the Al content. The thermal-stability of the Ti(1-x)Al(x)N coatings increased with increasing Al content. (C) 2011 Published by Elsevier B.V. Selection and/or peer-review under responsibility of Selection and/or peer-review under responsibility of Lanzhou Institute of Physics, China.

引用

页数：5

共 50 条

[41] Microstructure and chemical state of Ti1-xYxN film deposited by reactive magnetron sputtering
Choi, WS
Hwang, SK
Lee, CM
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A-VACUUM SURFACES AND FILMS, 2000, 18 (06): : 2914 - 2921
[42] Structure and Composition of TiVN Thin Films Deposited by Reactive DC Magnetron Co-sputtering
Deeleard, T.
Buranawong, A.
Choeysuppaket, A.
Witit-anun, N.
Chaiyakun, S.
Limsuwan, P.
ISEEC, 2012, 32 : 1000 - 1005
[43] Characterization of Aluminium Titanium Nitride Thin Films Deposited by Reactive Magnetron Co-sputtering
Buranawong, Adisorn
Chaiyakhun, Surasing
Limsuwan, Pichet
FUNCTIONALIZED AND SENSING MATERIALS, 2010, 93-94 : 340 - +
[44] IR-transparent electrically conductive CuAlxOx deposited by reactive magnetron co-sputtering
Johnson, LF
Moran, MB
Savrun, E
Sarikaya, M
Kolega, RR
MATERIALS SCIENCE OF NOVEL OXIDE-BASED ELECTRONICS, 2000, 623 : 271 - 276
[45] Thermal decomposition of Zr1-xAlxN thin films deposited by magnetron sputtering
Sanjines, R.
Sandu, C. S.
Lamni, R.
Levy, F.
SURFACE & COATINGS TECHNOLOGY, 2006, 200 (22-23): : 6308 - 6312
[46] Effect of Al content on the microstructure of Ti1-xAlxN coating
Wang, Yong-Kang
Xiong, Ren-Zhang
Lei, Ting-Quan
Xia, Li-Fang
Li, Bing-Sheng
Cailiao Gongcheng/Journal of Materials Engineering, 2002, (08):
[47] Thermal stability of tungsten nitride films deposited by reactive magnetron sputtering
Mohamed, S. H.
SURFACE & COATINGS TECHNOLOGY, 2008, 202 (10): : 2169 - 2175
[48] Electronic properties of Cr1-xAlxN thin films deposited by reactive magnetron sputtering
Sanjinés, R
Banakh, O
Rojas, C
Schmid, PE
Lévy, F
THIN SOLID FILMS, 2002, 420 : 312 - 317
[49] Combinatorial synthesis of Cr1-xAlxN and Ta1-xAlxN coatings using industrial scale co-sputtering
Schalk, N.
Weirather, T.
Sabitzer, C.
Hirn, S.
Terziyska, V. L.
Gangopadhyay, S.
Czettl, C.
Polcik, P.
Kathrein, M.
Mitterer, C.
SURFACE ENGINEERING, 2016, 32 (04) : 252 - 257
[50] Influence of pulsed-substrate bias duty cycle on the microstructure and defects of cathodic arc-deposited Ti1-xAlxN coatings
Salamania, J.
Johnson, L. J. S.
Schramm, I. C.
Calamba, K. M.
Boyd, R.
Bakhit, B.
Rogstrom, L.
Oden, M.
SURFACE & COATINGS TECHNOLOGY, 2021, 419

← 1 2 3 4 5 →