Friction stir welding of dissimilar AA2024 and AA7075 aluminum alloys

被引：187
|
作者：
Khodir, Saad Ahmed [1 ]
Shibayanagi, Toshiya [1 ]
机构：
[1] Osaka Univ, Joining & Welding Res Inst, Osaka 5670047, Japan
来源：
MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS | 2008年 / 148卷 / 1-3期
关键词：
friction stir welding; 2024-T3 Al alloy; 7075-T6 Al alloy; welding speed; microstructure; mechanical properties;
D O I：
10.1016/j.mseb.2007.09.024
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The present study focuses on the microstructure and mechanical properties of dissimilar joints of 2024-T3 Al alloy to 7075-T6 Al alloy produced by friction stir welding. Effects of welding speed and fixed location of base metals on microstructures, hardness distributions, and tensile properties of the welded joints were investigated. SEM-EDS analysis revealed that the stir zone contains a mixed structure and onion ring pattern with a periodic change of grain size as well as a heterogeneous distribution of alloying elements. The maximum tensile strength of 423.0 MPa was achieved for the joint produced at welding speed of 1.67 mm/s when 2024 Al alloy was located on the advancing side. (C) 2007 Elsevier B.V. All rights reserved.
引用
收藏
页码：82 / 87
页数：6
相关论文
共 50 条
  • [31] Dissimilar friction stir welding between polycarbonate and AA 7075 aluminum alloy
    Moshwan, Raza
    Rahmat, Sahifulddin M.
    Yusof, Farazila
    Hassan, Mohsen A.
    Hamdi, Mohd
    Fadzil, Mohd
    INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2015, 106 (03) : 258 - 266
  • [32] Characterizations of microstructure, crystallographic texture and mechanical properties of dissimilar friction stir welding joints for AA2024 and AA7075 under different tool shoulder end profiles
    Zhang, Chenghang
    Huang, Guangjie
    Cao, Yu
    Li, Qilei
    Niu, Liqiang
    Liu, Qing
    MATERIALS TODAY COMMUNICATIONS, 2020, 25
  • [33] DISSIMILAR FRICTION STIR WELDING OF AA2024-T3 AND AA7075-T6 ALUMINIUM ALLOYS
    Aldanondo, E.
    da Silva, A. A. M.
    Alvarez, P.
    Lizarralde, A.
    Echeverria, A.
    FRICTION STIR WELDING AND PROCESSING V, 2009, : 295 - 304
  • [34] Corrosion of a dissimilar friction stir weld joining aluminium alloys AA2024 and AA7010
    Jariyaboon, M.
    Davenport, A. J.
    Ambat, R.
    Connolly, B. J.
    Williams, S. W.
    Price, D. A.
    CORROSION ENGINEERING SCIENCE AND TECHNOLOGY, 2006, 41 (02) : 135 - 142
  • [35] Influence of friction stir welding parameters on metallurgical and mechanical properties of dissimilar AA5454-AA7075 aluminum alloys
    Abd Elnabi, Mohamed M.
    Elshalakany, Abou Bakr
    Abdel-Mottaleb, M. M.
    Osman, T. A.
    El Mokadem, A.
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2019, 8 (02): : 1684 - 1693
  • [36] Effect of Friction Stir Welding of Aluminum Alloys AA6061/AA7075: Temperature Measurement, Microstructure, and Mechanical Properties
    Godhani, Pratik S.
    Patel, Vivek V.
    Vora, Jay J.
    Chaudhary, Nishit D.
    Banka, Rishab
    INNOVATIONS IN INFRASTRUCTURE, 2019, 757 : 591 - 598
  • [37] Effect of laser beam welding parameters on morphology and strength of dissimilar AA2024/AA7075 T-joints
    Oliveira, P. I.
    Costa, J. M.
    Loureiro, A.
    JOURNAL OF MANUFACTURING PROCESSES, 2018, 35 : 149 - 160
  • [38] Effect of welding speeds on microstructure and mechanical properties of dissimilar friction stir welding of AA7075 and AA5083 alloy
    Dewangan, Satya Kumar
    Tripathi, M. K.
    Manoj, M. K.
    MATERIALS TODAY-PROCEEDINGS, 2020, 27 : 2713 - 2717
  • [39] Dissimilar Friction Stir Welding of AA2024 and AISI 1018: Microstructure and Mechanical Properties
    Ahmed, Mohamed M. Z.
    Jouini, Nabil
    Alzahrani, Bandar
    Seleman, Mohamed M. El-Sayed
    Jhaheen, Mohammad
    METALS, 2021, 11 (02) : 1 - 18
  • [40] Quantitative analysis of grain structure and texture evolution of dissimilar AA2024/7075 joints manufactured by friction stir welding
    Zhang, Chenghang
    Huang, Guangjie
    Liu, Qing
    MATERIALS TODAY COMMUNICATIONS, 2021, 26
12345