Effect of welding speeds on microstructure and mechanical properties of dissimilar friction stir welding of AA7075 and AA5083 alloy

被引：14

作者：

Dewangan, Satya Kumar ^{[1
]}

Tripathi, M. K. ^{[1
]}

Manoj, M. K. ^{[1
]}

机构：

[1] NIT Raipur, Dept Met & Mat Engn, Raipur 492010, Madhya Pradesh, India

来源：

MATERIALS TODAY-PROCEEDINGS | 2020年 / 27卷

关键词：

Dissimilar friction stir welding; Base metal AA7075 and AA5083; Microstructure; Tensile; Hardness; HEAT-TREATMENT; ALUMINUM;

D O I：

10.1016/j.matpr.2019.12.190

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Effect of welding speeds is studied in Friction stir welding (FSW) using cylindrical tool for the welding of Aluminum 7075 and 5083 alloys. Sound joint of similar and dissimilar FSW were obtained by use of 20 and 45 mm/min welding speed. The temperature distribution on entire weld zone influences the grain size of FSW. The grain size at different zones, affect the properties of FSW. This study, observed that the dissimilar joining of AA7075 and AA5083 exhibits better strength at the welding speed of 20 mm/ min. Similar FSW achieved better strength at 45 mm/min welding speeds. Dissimilar welding required higher heat input as compare to similar welding. (C) 2019 Elsevier Ltd. All rights reserved. Selection and peer-review under responsibility of the scientific committee of the International conference on Materials and Manufacturing Methods.

引用

页码：2713 / 2717

页数：5

共 50 条

[1] Friction stir welding of similar and dissimilar AA7075 and AA5083
Ahmed, M. M. Z.
Ataya, Sabbah
Selema, M. M. El-Sayed
Ammar, H. R.
Ahmed, Essam
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2017, 242 : 77 - 91
[2] Optimization and mechanical characterization of aa5083 and aa7075 dissimilar aluminium alloy joints produced by friction stir welding
Rajeshkannan S.
Vigneshkumar M.
Gopal V.
Ramesh S.
International Journal of Vehicle Structures and Systems, 2021, 13 (03) : 335 - 340
[3] EFFECT OF TOOL PIN PROFILE ON FRICTION STIR WELDING OF DISSIMILAR MATERIALS AA5083 AND AA7075 ALUMINIUM ALLOY
AZMI, M. H.
HASNOL, M. Z.
ZAHARUDDIN, M. F. A.
SHARIF, S.
RHEE, S.
ARCHIVES OF METALLURGY AND MATERIALS, 2022, 67 (02) : 465 - 470
[4] Mathematical modeling and optimization of friction stir welding process parameters in AA5083 and AA7075 aluminum alloy joints
Saeidi, M.
Manafi, B.
Givi, M. K. Besharati
Faraji, G.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2016, 230 (07) : 1284 - 1294
[5] Dissimilar friction stir lap welding of AA2198 and AA7075 sheets: forces, microstructure and mechanical properties
Antonello Astarita
Fausto Tucci
Alessia Teresa Silvestri
Michele Perrella
Luca Boccarusso
Pierpaolo Carlone
The International Journal of Advanced Manufacturing Technology, 2021, 117 : 1045 - 1059
[6] Dissimilar friction stir lap welding of AA2198 and AA7075 sheets: forces, microstructure and mechanical properties
Astarita, Antonello
Tucci, Fausto
Silvestri, Alessia Teresa
Perrella, Michele
Boccarusso, Luca
Carlone, Pierpaolo
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2021, 117 (3-4): : 1045 - 1059
[7] Friction stir welding of AA5083 aluminum alloy
Liu, HJ
Fujii, H
Maeda, M
Nogi, K
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2003, 13 : 14 - 17
[8] Effect of Heat Treatment on the Microstructure and Mechanical Properties of Rotary Friction Welded AA7075 and AA5083 Dissimilar Joint
Mahajan, Aditya M. M.
Babu, Nagumothu Kishore
Talari, Mahesh Kumar
Rehman, Ateekh Ur
Srirangam, Prakash
MATERIALS, 2023, 16 (06)
[9] On the microstructure and mechanical properties of similar and dissimilar AA7075 and AA2024 friction stir welding joints: Effect of rotational speed
Zhang, Chenghang
Huang, Guangjie
Cao, Yu
Zhu, Yulong
Liu, Qing
JOURNAL OF MANUFACTURING PROCESSES, 2019, 37 : 470 - 487
[10] Analyzing dissimilar friction stir welding of AA5754/AA7075
Şefika Kasman
Zafer Yenier
The International Journal of Advanced Manufacturing Technology, 2014, 70 : 145 - 156

← 1 2 3 4 5 →