Effect of welding speeds on microstructure and mechanical properties of dissimilar friction stir welding of AA7075 and AA5083 alloy

被引：14
|
作者：
Dewangan, Satya Kumar [1 ]
Tripathi, M. K. [1 ]
Manoj, M. K. [1 ]
机构：
[1] NIT Raipur, Dept Met & Mat Engn, Raipur 492010, Madhya Pradesh, India
来源：
MATERIALS TODAY-PROCEEDINGS | 2020年 / 27卷
关键词：
Dissimilar friction stir welding; Base metal AA7075 and AA5083; Microstructure; Tensile; Hardness; HEAT-TREATMENT; ALUMINUM;
D O I：
10.1016/j.matpr.2019.12.190
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Effect of welding speeds is studied in Friction stir welding (FSW) using cylindrical tool for the welding of Aluminum 7075 and 5083 alloys. Sound joint of similar and dissimilar FSW were obtained by use of 20 and 45 mm/min welding speed. The temperature distribution on entire weld zone influences the grain size of FSW. The grain size at different zones, affect the properties of FSW. This study, observed that the dissimilar joining of AA7075 and AA5083 exhibits better strength at the welding speed of 20 mm/ min. Similar FSW achieved better strength at 45 mm/min welding speeds. Dissimilar welding required higher heat input as compare to similar welding. (C) 2019 Elsevier Ltd. All rights reserved. Selection and peer-review under responsibility of the scientific committee of the International conference on Materials and Manufacturing Methods.
引用
收藏
页码：2713 / 2717
页数：5
相关论文
共 50 条
  • [21] Effect of Friction Stir Welding on the Mechanical and Microstructural Behaviour of AA7075 Aluminium Alloy
    Mahesha, C. R.
    Suprabha, R.
    Kumar, Nellore Manoj
    Kosanam, Koushik
    Anandaram, Harishchander
    Naidu, S. C. V. Ramana Murty
    Chakravarthi, M. Kalyan
    Govindarajan, Venkatesan
    ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2022, 2022
  • [22] Experimental Studies on Mechanical Behavior of TIG and Friction Stir Welded AA5083 -AA7075 Dissimilar Aluminum Alloys
    Goriparthi V.
    Nallu R.
    Chebolu R.
    Indupuri S.
    Rudrapati R.
    Advances in Materials Science and Engineering, 2023, 2023
  • [23] Friction Stir Welding of three dissimilar aluminium alloy: AA2024, AA6061 and AA7075
    Bosneag, A.
    Constantin, M. A.
    Nitu, E.
    Iordache, M.
    MODTECH INTERNATIONAL CONFERENCE - MODERN TECHNOLOGIES IN INDUSTRIAL ENGINEERING VI (MODTECH 2018), 2018, 400
  • [24] Effect of friction stir welding parameters on the microstructure and mechanical properties of AA7075/YSZ composite joints
    Abdulwadood, Nazar Mudher
    Faridh, Mohd A. Z.
    Basheer, Uday M.
    JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2025,
  • [25] Effect of friction stir welding parameters on microstructure and mechanical properties of the dissimilar alloys of AZ91D and AA7075
    Mehdi, Husain
    Jain, Sumit
    Salah, Abdellah Nait
    Singh, Abhendra P.
    Chawla, Sumit
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 2023,
  • [26] Microstructure and mechanical properties of dissimilar friction stir welds of AA2014 and AA7075
    Kumar, Raj
    Upadhyay, Vikas
    Sharma, Chaitanya
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 2022, 236 (03) : 1083 - 1095
  • [27] Friction stir welding of dissimilar AA7050 and AA5083 aluminium alloys: Microstructural and mechanical characterization
    Subrahmanian, K.
    Ramachandran, K. K.
    Rajeev, V. R.
    Renjith, V. B.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 2024, 238 (05) : 2139 - 2150
  • [28] Submerged Dissimilar Friction Stir Welding of AA6061 and AA7075 Aluminum Alloys: Microstructure Characterization and Mechanical Property
    Heidarzadeh, Akbar
    Javidani, Mousa
    Mofarrehi, Mohammadreza
    Farzaneh, Amir
    Chen, X-Grant
    METALS, 2021, 11 (10)
  • [29] Effect of Friction Stir Welding of Aluminum Alloys AA6061/AA7075: Temperature Measurement, Microstructure, and Mechanical Properties
    Godhani, Pratik S.
    Patel, Vivek V.
    Vora, Jay J.
    Chaudhary, Nishit D.
    Banka, Rishab
    INNOVATIONS IN INFRASTRUCTURE, 2019, 757 : 591 - 598
  • [30] MECHANICAL STRENGTH OF DISSIMILAR AA7075 AND AA6061 ALUMINUM ALLOYS USING FRICTION STIR WELDING
    Sathari, N. A. A.
    Razali, A. R.
    Ishak, M.
    Shah, L. H.
    INTERNATIONAL JOURNAL OF AUTOMOTIVE AND MECHANICAL ENGINEERING, 2015, 11 : 2713 - 2721
12345