Development and characterization of dissimilar joint between AA2024-T3 and AA6061-T6 by modified friction stir clinching process

被引：40
|
作者：
Paidar, M. [1 ]
Vignesh, R. Vaira [2 ]
Moharrami, A. [3 ]
Ojo, O. O. [4 ]
Jafari, A. [5 ]
Sadreddini, S. [6 ]
机构：
[1] Islamic Azad Univ, Dept Mat Engn, South Tehran Branch, Tehran 1459853849, Iran
[2] Amrita Vishwa Vidyapeetham, Dept Mech Engn, Amrita Sch Engn, Coimbatore, Tamil Nadu, India
[3] Pishroghaleb Simindasht Ind Prod Co, Dept Res & Dev, Simindasht Ind Pk, Alborz, Iran
[4] Fed Univ Technol Akure, Dept Ind & Prod Engn, Akure, Nigeria
[5] South Ural State Univ, 76 Lenin Aven, Chelyabinsk 454080, Russia
[6] Islamic Azad Univ, Sci & Res Branch, Young Researchers & Elites Club, Tehran, Iran
来源：
VACUUM | 2020年 / 176卷
关键词：
Microstructure; Friction stir clinching; Aluminum; Dissimilar; Welding; MECHANICAL-PROPERTIES; ALUMINUM-ALLOY; FATIGUE LIFE; MICROSTRUCTURE; TOOL; STRENGTH; DESIGN;
D O I：
10.1016/j.vacuum.2020.109298
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Friction stir spot welding (FSSW) is one of the effective solid-state welding strategies to achieve good joint efficiency between dissimilar aluminum alloys. However, the formation of tool-induced keyhole (a stress raiser) is inevitable during the FSSW process. This study explores the possibility of eliminating keyhole with the aim of improving the properties of the joint by Modified Friction Stir Clinching (MFSC) process. The tensile-shear and cross-tension strengths of the MFSC joints are 83% and 50% higher than that of the specimens joined by FSSW. The article presents a comprehensive analysis of the material flow characteristics, microstructural evolution, and tensile properties of the dissimilar joints between AA2024-T3 and AA6061-T6 that was enabled by the MFSC process.
引用
收藏
页数：6
相关论文
共 50 条
  • [41] Microstructure of stir zone in dissimilar friction stir welds of AA6061-T6 and AZ31 alloy sheets
    Lee, Kwang-Jin
    Kwon, Eui-Pyo
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2014, 24 (07) : 2374 - 2379
  • [42] Investigation of tool offset on mechanical properties of dissimilar AA6061-T6 and AA7075-T6 joint in parallel FSW process
    Amir Ghiasvand
    Soran Hassanifard
    Maziar Mahdipour Jalilian
    Hasan Kheradmandan
    Welding in the World, 2021, 65 : 441 - 450
  • [43] Investigation of tool offset on mechanical properties of dissimilar AA6061-T6 and AA7075-T6 joint in parallel FSW process
    Ghiasvand, Amir
    Hassanifard, Soran
    Jalilian, Maziar Mahdipour
    Kheradmandan, Hasan
    WELDING IN THE WORLD, 2021, 65 (03) : 441 - 450
  • [44] Fatigue analysis of the friction stir welded AA6061-T6 aluminum alloy
    Jain, Nitesh
    Kumar, Rajesh
    MATERIALS RESEARCH EXPRESS, 2021, 8 (01)
  • [45] Friction stir weldabilities of AA1050-H24 and AA6061-T6 aluminum alloys
    Liu, HJ
    Fujii, H
    Maeda, M
    Nogi, K
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2005, 21 (03) : 415 - 418
  • [46] Characteristics analysis and monitoring of friction stir welded dissimilar AA5083/AA6061-T6 using acoustic emission technique
    Kannaiyan, Senthilkumar
    Murugesan, Seeman
    Thirumalaikannan, Dhamotharakannan
    Visvalingam, Balasubramanian
    Nagasai, Bellamkonda Prasanna
    WELDING INTERNATIONAL, 2024, 38 (08) : 556 - 573
  • [47] Investigation on Friction Stir Weldability Characteristics of AA7075-T651 and AA6061-T6 Based Nanocomposites
    Madhusudan, M.
    Shanmuganatan, S. P.
    Shridhar, Kurse
    John, Jacob
    Krishnamurthy, R.
    Sasikumar, Bashyam
    ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2021, 2021
  • [48] Dissimilar friction stir spot welding of AA2024-T3/AA7075-T6 aluminum alloys under different welding parameters and media
    Zhang, Gui-ju
    Xiao, Cai-yuan
    Ojo, Olatunj Oladimeji
    DEFENCE TECHNOLOGY, 2021, 17 (02) : 531 - 544
  • [49] Dissimilar friction stir spot welding of AA2024-T3/AA7075-T6 aluminum alloys under different welding parameters and media
    Gui-ju Zhang
    Cai-yuan Xiao
    Olatunj Oladimeji Ojoc
    Defence Technology, 2021, 17 (02) : 531 - 544
  • [50] Butted friction stir forming of AA6061-T6 to low carbon steel
    Strawn, Connor
    Strauss, Alvin M.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2023, 237 (6-7) : 1122 - 1127
12345