A study on fretting fatigue life for the Inconel alloy 600 at high temperature

被引：27
|
作者：
Kwon, Jae-do [1 ]
Park, Dae-kyu [2 ]
Woo, Seung-wan [1 ]
Yoon, Dong-hwan [2 ]
Chung, Ilsup [1 ]
机构：
[1] Yeungnam Univ, Dept Mech Engn, Kyongsan 712749, South Korea
[2] Yeungnam Univ, Grad Sch Mech Engn, Kyongsan 712749, South Korea
来源：
NUCLEAR ENGINEERING AND DESIGN | 2010年 / 240卷 / 10期
关键词：
NICKEL-BASED ALLOYS; WEAR;
D O I：
10.1016/j.nucengdes.2010.05.013
中图分类号：
TL [原子能技术]; O571 [原子核物理学];
学科分类号：
0827 ; 082701 ;
摘要：
Fatigue tests of the Inconel 600, a type of nickel-chromium based heat resistant alloy used for steam generator tubes in nuclear power plants, were carried out. Temperature increase to 320 degrees C did not change the fatigue strength much, but the fretting condition caused a significant reduction in the fatigue strength. The reduction at 10(7) cycles was about 70% for both of room and the high temperatures. An apparatus to realize the fretting condition has been developed and instrumented to measure the normal and friction forces. The bridge type of contact pad was fabricated of SUS 409 stainless steel. Fracture surfaces and wear scars were observed by electron microscope and the profiles of wear scar were measured by non-contact 3D-profiler. (C) 2010 Elsevier B.V. All rights reserved.
引用
收藏
页码：2521 / 2527
页数：7
相关论文
共 50 条
  • [31] An experimental study on the fretting wear behavior of Inconel 600 and 690 in pure water
    Zhang, P.
    Li, J.
    Yu, H. L.
    Tu, X. H.
    Li, W.
    WEAR, 2021, 486 (486-487)
  • [32] EXPERIMENTAL STUDY ON IMPACT FRETTING WEAR OF INCONEL TUBES UNDER HIGH TEMPERATURE AND PRESSURE
    Lee, Choon Yeol
    Bae, Joon Woo
    Chai, Young Suck
    Shin, Kyoosik
    INTERNATIONAL JOURNAL OF MODERN PHYSICS B, 2011, 25 (31): : 4253 - 4256
  • [33] Influence of laser peening on the high-temperature fatigue life and fracture of Inconel 718 nickel-based alloy
    Sheng, Jie
    Zhang, Hang
    Hu, Xiaoqi
    Huang, Shu
    THEORETICAL AND APPLIED FRACTURE MECHANICS, 2020, 109
  • [34] High cycle fatigue property of Ti-600 alloy at ambient temperature
    Zeng Liying
    Zhao Yongqing
    Hong Quan
    Yang Guanjun
    JOURNAL OF ALLOYS AND COMPOUNDS, 2011, 509 (05) : 2081 - 2086
  • [35] A study on the fretting fatigue life of zircaloy alloys
    Kwon, Jae-Do
    Park, Dae-Kyu
    Woo, Seung-Wan
    Chai, Young-Suck
    MODERN PHYSICS LETTERS B, 2008, 22 (11): : 851 - 856
  • [36] Lubrication of Inconel 600 with ionic liquids at high temperature
    Jimenez, A. E.
    Bermudez, M. D.
    Iglesias, P.
    TRIBOLOGY INTERNATIONAL, 2009, 42 (11-12) : 1744 - 1751
  • [37] Study on the fretting maps of Zircaloy-4 alloy against Inconel 718 alloy
    Yuan, Xinlu
    Zhang, Xiaoyu
    Zhang, Qiang
    Pu, Jian
    Li, Gen
    Ren, Pingdi
    Zhu, Minhao
    TRIBOLOGY INTERNATIONAL, 2021, 160
  • [38] Research on factors affecting fretting fatigue life of high-temperature dovetail tenon
    Yang, Bowen
    Huo, Junzhou
    Gao, Qiang
    Ren, Rong
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2022, 45 (04) : 1126 - 1144
  • [39] Evolution of wear damage in Inconel 600 alloy due to fretting against type 304 stainless steel
    Li, J.
    Ma, M.
    Lu, Y. H.
    Xin, L.
    WEAR, 2016, 346 : 15 - 21
  • [40] Key Problems in Study on Fretting Fatigue of Aluminum Alloy
    Xu, Li
    Chen, Yueliang
    Yi, Lin
    Luo, Hao
    MATERIALS PROCESSING TECHNOLOGY, PTS 1-4, 2011, 291-294 : 1511 - +
12345