A study on fretting fatigue life for the Inconel alloy 600 at high temperature

被引：27
|
作者：
Kwon, Jae-do [1 ]
Park, Dae-kyu [2 ]
Woo, Seung-wan [1 ]
Yoon, Dong-hwan [2 ]
Chung, Ilsup [1 ]
机构：
[1] Yeungnam Univ, Dept Mech Engn, Kyongsan 712749, South Korea
[2] Yeungnam Univ, Grad Sch Mech Engn, Kyongsan 712749, South Korea
来源：
NUCLEAR ENGINEERING AND DESIGN | 2010年 / 240卷 / 10期
关键词：
NICKEL-BASED ALLOYS; WEAR;
D O I：
10.1016/j.nucengdes.2010.05.013
中图分类号：
TL [原子能技术]; O571 [原子核物理学];
学科分类号：
0827 ; 082701 ;
摘要：
Fatigue tests of the Inconel 600, a type of nickel-chromium based heat resistant alloy used for steam generator tubes in nuclear power plants, were carried out. Temperature increase to 320 degrees C did not change the fatigue strength much, but the fretting condition caused a significant reduction in the fatigue strength. The reduction at 10(7) cycles was about 70% for both of room and the high temperatures. An apparatus to realize the fretting condition has been developed and instrumented to measure the normal and friction forces. The bridge type of contact pad was fabricated of SUS 409 stainless steel. Fracture surfaces and wear scars were observed by electron microscope and the profiles of wear scar were measured by non-contact 3D-profiler. (C) 2010 Elsevier B.V. All rights reserved.
引用
收藏
页码：2521 / 2527
页数：7
相关论文
共 50 条
  • [21] STUDY ON THE BEHAVIOR OF CORROSION OF INCONEL 600 ALLOY IN HIGH-TEMPERATURE SODIUM PHOSPHATE SOLUTION.
    Mizutani, Masataka
    Arioka, Koji
    Ochi, Tatsuya
    Okamoto, Shuzo
    Onimura, Kichiro
    Mitsubishi Heavy Industries, Mitsubishi Technical Bulletin, 1979, (135): : 1 - 9
  • [22] Influence of humidity on high temperature oxidation of Inconel 600 alloy: Oxide layers and residual stress study
    Xiao, J.
    Prud'homme, N.
    Li, N.
    Ji, V.
    APPLIED SURFACE SCIENCE, 2013, 284 : 446 - 452
  • [23] Low-temperature electrical resistivity study of deformed Inconel alloy 600
    Chan, Feng Shiu
    Yao, Yeong Der
    Wang, Shing Hoa
    JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 2006, 304 (01) : E464 - E466
  • [24] Fretting corrosion fatigue of Alloy 690 in high-temperature pure water
    Liao, Jiapeng
    Wu, Xinqiang
    Tan, Jibo
    Tang, Lichen
    Qian, Hao
    Xie, Yongcheng
    CORROSION SCIENCE, 2018, 133 : 423 - 431
  • [25] Fretting wear characteristics of INCONEL 690 and INCONEL 600 in water environment
    Jeong, SH
    Park, CY
    Lee, YZ
    ADVANCES IN FRACTURE AND STRENGTH, PTS 1- 4, 2005, 297-300 : 1412 - 1417
  • [26] Stuy on Fatigue Life of Aluminum Alloy Considering Fretting
    Yang, Maosheng
    Zhao, Hongqiang
    Wang, Yunxiang
    Chen, Xiaofei
    Fan, Jiali
    5TH ANNUAL INTERNATIONAL CONFERENCE ON MATERIAL SCIENCE AND ENVIRONMENTAL ENGINEERING (MSEE2017), 2018, 301
  • [27] Effect of dissolved hydrogen on corrosion of Inconel Alloy 600 in high temperature hydrogenated water
    Peng, Qunjia
    Hou, Juan
    Sakaguchi, Kazuhiko
    Takeda, Yoichi
    Shoji, Tetsuo
    ELECTROCHIMICA ACTA, 2011, 56 (24) : 8375 - 8386
  • [28] CORROSION-RESISTANCE OF INCONEL ALLOY 600 IN HIGH-TEMPERATURE PHOSPHATE SOLUTIONS
    PESSALL, N
    DUNLAP, AB
    FELDMAN, DW
    CORROSION, 1977, 33 (04) : 130 - 144
  • [29] Statistical modeling of fatigue crack growth rate in Inconel alloy 600
    Al-Rubaie, Kassim S.
    Godefroid, Leonardo B.
    Lopes, Jadir A. M.
    INTERNATIONAL JOURNAL OF FATIGUE, 2007, 29 (05) : 931 - 940
  • [30] Effect of ultrasonic surface rolling process on the high temperature fretting wear behavior of Inconel 690 alloy
    Yin, Meigui
    Yin, Haiyan
    Zhang, Qiqing
    Long, Jiangqi
    WEAR, 2022, 500
12345