A study on fretting fatigue life for the Inconel alloy 600 at high temperature

被引：27
|
作者：
Kwon, Jae-do [1 ]
Park, Dae-kyu [2 ]
Woo, Seung-wan [1 ]
Yoon, Dong-hwan [2 ]
Chung, Ilsup [1 ]
机构：
[1] Yeungnam Univ, Dept Mech Engn, Kyongsan 712749, South Korea
[2] Yeungnam Univ, Grad Sch Mech Engn, Kyongsan 712749, South Korea
来源：
NUCLEAR ENGINEERING AND DESIGN | 2010年 / 240卷 / 10期
关键词：
NICKEL-BASED ALLOYS; WEAR;
D O I：
10.1016/j.nucengdes.2010.05.013
中图分类号：
TL [原子能技术]; O571 [原子核物理学];
学科分类号：
0827 ; 082701 ;
摘要：
Fatigue tests of the Inconel 600, a type of nickel-chromium based heat resistant alloy used for steam generator tubes in nuclear power plants, were carried out. Temperature increase to 320 degrees C did not change the fatigue strength much, but the fretting condition caused a significant reduction in the fatigue strength. The reduction at 10(7) cycles was about 70% for both of room and the high temperatures. An apparatus to realize the fretting condition has been developed and instrumented to measure the normal and friction forces. The bridge type of contact pad was fabricated of SUS 409 stainless steel. Fracture surfaces and wear scars were observed by electron microscope and the profiles of wear scar were measured by non-contact 3D-profiler. (C) 2010 Elsevier B.V. All rights reserved.
引用
收藏
页码：2521 / 2527
页数：7
相关论文
共 50 条
  • [1] The evaluation of fretting fatigue life for INCONEL 600 and 690 alloy
    Park, Dae-Kyu
    Bae, Yong-Tak
    Choi, Sung-Jong
    Chai, Young-Suck
    Kwon, Jae-Do
    ADVANCED NONDESTRUCTIVE EVALUATION I, PTS 1 AND 2, PROCEEDINGS, 2006, 321-323 : 703 - 706
  • [2] Fretting wear properties of Inconel600 alloy at high temperature
    Xin, Long
    Ma, Miao
    Lu, Yong-Hao
    Gongcheng Kexue Xuebao/Chinese Journal of Engineering, 2015, 37 (07): : 928 - 935
  • [3] A study on fretting fatigue characteristics of Inconel 690 at high temperature
    Kwon, Jae-do
    Jeung, Han-kyu
    Chung, Il-sup
    Yoon, Dong-hwan
    Park, Dae-kyu
    TRIBOLOGY INTERNATIONAL, 2011, 44 (11) : 1483 - 1487
  • [4] Crack initiation and propagation under fretting fatigue of inconel 600 alloy
    Han-Kyu Jeung
    Jae-Do Kwon
    Choon Yeol Lee
    Journal of Mechanical Science and Technology, 2015, 29 : 5241 - 5244
  • [5] Crack initiation and propagation under fretting fatigue of inconel 600 alloy
    Jeung, Han-Kyu
    Kwon, Jae-Do
    Lee, Choon Yeol
    JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2015, 29 (12) : 5241 - 5244
  • [6] A study on fretting behavior in room temperature for INCONEL alloy 690
    Do Kwon, Jae
    Chai, Young Suck
    Bae, Yong Tak
    Choi, Sung Jong
    INTERNATIONAL JOURNAL OF MODERN PHYSICS B, 2006, 20 (25-27): : 4303 - 4308
  • [7] Influence of Chloride Concentration on Fretting Wear Behavior of Inconel 600 Alloy
    Zhang, Mengyang
    Jiang, Qinglei
    Zhang, Yizhou
    Chen, Yinqiang
    Guo, Baoli
    Xin, Long
    MATERIALS, 2024, 17 (12)
  • [8] Effect of precipitated carbides on the fretting wear behavior of Inconel 600 alloy
    Zhang, H. Y.
    Lu, Y. H.
    Ma, M.
    Li, J.
    WEAR, 2014, 315 (1-2) : 58 - 67
  • [9] Effects of Laser Shock Peening on High-Temperature Fretting Fatigue Life of Titanium Alloy
    Chen X.
    Cui H.-T.
    Tian Z.
    Zhang H.-J.
    He Y.-L.
    Tuijin Jishu/Journal of Propulsion Technology, 2020, 41 (04): : 903 - 909
  • [10] Influence of machining parameters on fretting fatigue life of Inconel 718
    Infante-Garcia, D.
    Diaz-Alvarez, A.
    Belda, R.
    Diaz-Alvarez, J.
    Cantero, J. L.
    Giner, E.
    Miguelez, M. H.
    INTERNATIONAL JOURNAL OF FATIGUE, 2022, 162
12345