Microstructure and XRD analysis in the interface zone of Mg/Al diffusion bonding

被引：38
|
作者：
Wang Juan [1 ]
Li Yajiang [1 ]
Liu Peng [1 ]
Geng Haoran [2 ]
机构：
[1] Shandong Univ, Key Lab Liquid Struct & Hered Mat, Sch Mat Sci & Engn, Jinan 250061, Peoples R China
[2] Jinan Univ, Sch Mat Sci & Engn, Jinan 250022, Peoples R China
来源：
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY | 2008年 / 205卷 / 1-3期
基金：
中国国家自然科学基金;
关键词：
intermetallic compounds; x-ray diffraction; microstructure diffusion;
D O I：
10.1016/j.jmatprotec.2007.11.096
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The microstructure and phase constituent for the Mg/Al diffusion bonded joint were studied via scanning electron microscope (SEM) and X-ray diffraction (XRD). The test results indicated that the new compact phase was formed near the transition region of Mg/Al diffusion interface. There are three new phase layers in the transition region. The fracture morphology mainly consists of coarse and gray fracture, and the fracture is mainly the mixed fracture of cleavage and brittleness. X-ray diffraction test indicates that the diffusion zone of Mg/Al diffusion bonded joint consists of intermetallic compounds MgAl, Mg3Al2 and Mg2Al3. With the increase of heating temperature, the content Of Mg3Al2 and Mg2Al3 phases with good stability was improved. (c) 2007 Elsevier B.V. All rights reserved.
引用
收藏
页码：146 / 150
页数：5
相关论文
共 50 条
  • [41] Effect of thermal tempering on microstructure and mechanical properties of Mg-AZ31/Al-6061 diffusion bonding
    Jafarian, Mojtaba
    Rizi, Mohsen Saboktakin
    Jafarian, Morteza
    Honarmand, Mehrdad
    Javadinejad, Hamid Reza
    Ghaheri, Ali
    Bahramipour, Mohammad Taghi
    Ebrahimian, Marzieh
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2016, 666 : 372 - 379
  • [42] Interface Characteristics and Bonding Performance of the Corrugated Mg/Al Clad Plate
    Li, Sha
    Liu, Xinyang
    Jia, Yi
    Han, Jianchao
    Wang, Tao
    MATERIALS, 2021, 14 (16)
  • [43] Microstructure evolution and mechanical properties of CuW/Al interface fabricated by infiltration and vacuum hot-pressing diffusion bonding
    Wang, Chan
    Chen, Jian
    Liang, Shuhua
    Shao, Wenting
    Yang, Xigang
    VACUUM, 2023, 210
  • [44] Superplastic forming and diffusion bonding of Al-6Mg alloy
    Zhang, Jie
    Niu, Jitai
    Zhang, Baoyou
    Zhou, Youlong
    Hanjie Xuebao/Transactions of the China Welding Institution, 1996, 17 (04): : 219 - 223
  • [45] A novel method for preparing Al/Mg/Al laminated composite material, processing maps and interface diffusion analysis
    Bi, Xiaolin
    Hu, Yujun
    Li, Ruifeng
    Zhao, Hongjin
    Li, Taotao
    JOURNAL OF ALLOYS AND COMPOUNDS, 2022, 900
  • [46] XRD profile analysis characterization of ultrafine grained Al–Mg alloys
    Markus Dinkel
    Florian Pyczak
    Johannes May
    Heinz Werner Höppel
    Mathias Göken
    Journal of Materials Science, 2008, 43 : 7481 - 7487
  • [47] Molecular dynamics simulation of diffusion bonding of Al-Cu interface
    Li, Chang
    Li, Dongxu
    Tao, Xiaoma
    Chen, Hongmei
    Ouyang, Yifang
    MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING, 2014, 22 (06)
  • [48] STRUCTURE AND MECHANISM OF BONDING AT A DIFFUSION-BONDED AL/SIC INTERFACE
    RATNAPARKHI, PL
    HOWE, JM
    ACTA METALLURGICA ET MATERIALIA, 1994, 42 (03): : 811 - 823
  • [49] Microstructure of SiC/TiAl interface formed by solid-state diffusion bonding
    Maeda, M
    Tenyama, K
    Shibayanagi, T
    Naka, M
    NEW FRONTIERS OF PROCESSING AND ENGINEERING IN ADVANCED MATERIALS, 2005, 502 : 461 - 466
  • [50] XRD and TEM analysis on the Fe3Al/18-8 stainless steel diffusion bonded interface
    Wang, J
    Li, YJ
    Liu, P
    MATERIALS LETTERS, 2003, 57 (26-27) : 4323 - 4327
12345