XRD and TEM analysis on the Fe3Al/18-8 stainless steel diffusion bonded interface

被引：11
|
作者：
Wang, J [1 ]
Li, YJ
Liu, P
机构：
[1] Shandong Univ, Sch Mat Sci & Engn, Minist Educ, Key Lab Liquid Struct & Hered Mat, Jinan 250061, Peoples R China
[2] Harbin Inst Technol, Natl Key Lab Adv Welding Prod Technol, Harbin 150001, Peoples R China
来源：
MATERIALS LETTERS | 2003年 / 57卷 / 26-27期
关键词：
Fe3Al intermetallic; diffusion; interface; phase; microstructure;
D O I：
10.1016/S0167-577X(03)00311-2
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Fc(3)Al intermetallic and 18-8 stainless steel were diffusion-bonded at 1040 degreesC for 60 min. The reacted phase in the Fe3Al/18-8 diffusion-bonded interface was determined via X-ray diffractometry (XRD) and the lattice orientation relation between constituent phases was analyzed by transmission electron microscope (TEM). The results indicated that there were Fe3Al, Ni-3 Al, FeAl, alpha-Fe (Al) solid solution and Fe3C in the interface. In addition, the lattice orientation relation between alpha-Fe (Al) and Fe3C was (002)(alpha-Fe) ((Al))//(130)Fe3C. But there were no other brittle phases and micro-defects such as pore and crack, which can ensure the microstructure performance in the Fe3Al/18-8 diffusion-bonded interface. (C) 2003 Elsevier Science B.V. All rights reserved.
引用
收藏
页码：4323 / 4327
页数：5
相关论文
共 50 条
  • [1] Element diffusion near the interface of diffusion bonding for Fe3Al and stainless steel 18-8
    Li, YJ
    Wang, J
    Yin, YS
    Ma, HJ
    ACTA METALLURGICA SINICA, 2005, 41 (02) : 150 - 156
  • [2] Effect of heat treatment on microstructure near diffusion bonding interface of Fe3Al/18-8 stainless steel
    Ma, H. J.
    Li, Y. J.
    Wang, J.
    Yin, Y. S.
    MATERIALS SCIENCE AND TECHNOLOGY, 2006, 22 (12) : 1499 - 1502
  • [3] Cracking and fracture in welding zone of Fe3Al and 18-8 stainless steel by TIG
    Li, Yajiang
    Ma, Haijun
    Puchkov, U.A.
    Wang, Juan
    Hanjie Xuebao/Transactions of the China Welding Institution, 2010, 31 (07): : 1 - 4
  • [4] Technology and interface structure for diffusion bonding of Fe3Al/18-8 dissimilar materials
    Li, YJ
    Wang, J
    Yin, YS
    Ma, HJ
    MATERIALS SCIENCE AND TECHNOLOGY, 2004, 20 (11) : 1484 - 1488
  • [5] Interface characteristics in diffusion bonding of Fe3Al with Cr18-Ni8 stainless steel
    Wang, J
    Li, YJ
    Yin, YS
    JOURNAL OF COLLOID AND INTERFACE SCIENCE, 2005, 285 (01) : 201 - 205
  • [6] Analysis of the microstructure and phase constitution of the Fe3Al/18-8 diffusion interface after re-heating
    Ma, Haijun
    Li, Yajiang
    Wang, Juan
    Yin, Yansheng
    MATERIALS CHEMISTRY AND PHYSICS, 2006, 100 (2-3) : 319 - 323
  • [7] Stress distribution at diffusion-bonded interface of Fe3Al with Cr18-Ni8 steel
    王娟
    李亚江
    夏春智
    China Welding, 2008, (03) : 46 - 50
  • [8] XRD and TEM Analysis in the Interface of Diffusion Bonding for Fe3Al/Q235 Dissimilar Materials
    Yajiang LI
    JournalofMaterialsScience&Technology, 2003, (01) : 81 - 84
  • [9] XRD and TEM analysis in the interface of diffusion bonding for Fe3Al/Q235 dissimilar materials
    Li, YJ
    Wang, J
    Wu, HQ
    Feng, JC
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2003, 19 (01) : 81 - 84
  • [10] XRD and TEM analysis of Fe3Al alloy layer on the surface of the calorized steel
    Li, YJ
    Wang, J
    Wu, HQ
    MATERIALS RESEARCH BULLETIN, 2001, 36 (13-14) : 2389 - 2394
12345