XRD and TEM analysis on the Fe3Al/18-8 stainless steel diffusion bonded interface

被引：11
|
作者：
Wang, J [1 ]
Li, YJ
Liu, P
机构：
[1] Shandong Univ, Sch Mat Sci & Engn, Minist Educ, Key Lab Liquid Struct & Hered Mat, Jinan 250061, Peoples R China
[2] Harbin Inst Technol, Natl Key Lab Adv Welding Prod Technol, Harbin 150001, Peoples R China
来源：
MATERIALS LETTERS | 2003年 / 57卷 / 26-27期
关键词：
Fe3Al intermetallic; diffusion; interface; phase; microstructure;
D O I：
10.1016/S0167-577X(03)00311-2
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Fc(3)Al intermetallic and 18-8 stainless steel were diffusion-bonded at 1040 degreesC for 60 min. The reacted phase in the Fe3Al/18-8 diffusion-bonded interface was determined via X-ray diffractometry (XRD) and the lattice orientation relation between constituent phases was analyzed by transmission electron microscope (TEM). The results indicated that there were Fe3Al, Ni-3 Al, FeAl, alpha-Fe (Al) solid solution and Fe3C in the interface. In addition, the lattice orientation relation between alpha-Fe (Al) and Fe3C was (002)(alpha-Fe) ((Al))//(130)Fe3C. But there were no other brittle phases and micro-defects such as pore and crack, which can ensure the microstructure performance in the Fe3Al/18-8 diffusion-bonded interface. (C) 2003 Elsevier Science B.V. All rights reserved.
引用
收藏
页码：4323 / 4327
页数：5
相关论文
共 50 条
  • [41] Interface characterisation of diffusion bonded Ti-6Al-4V alloy and austenitic stainless steel couple
    Kurt, B.
    Orhan, N.
    Kaya, M.
    MATERIALS SCIENCE AND TECHNOLOGY, 2009, 25 (04) : 556 - 560
  • [42] Division and microstructure feature in the interface transition zone of Fe3Al/Q235 diffusion bonding
    Li, YJ
    Wang, J
    Yin, YS
    Ma, HJ
    JOURNAL OF COLLOID AND INTERFACE SCIENCE, 2005, 288 (02) : 521 - 525
  • [43] Research of the bonded interface of Cu9Al4Fe/1Cr18Ni9Ti stainless steel bimetallic composite
    Zou, Juntao
    Li, Silin
    Wei, Yanni
    Liang, Shuhua
    VACUUM, 2017, 146 : 266 - 273
  • [44] Microstructure and performance in diffusion-welded joints of Fe3Al/Q235 carbon steel
    Wang, J
    Li, YL
    Liu, P
    Wu, HQ
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2004, 145 (03) : 294 - 298
  • [45] Microstructure characteristics near the interface of vacuum brazing of Al/Cr18-Ni8 stainless steel
    Li, Y.
    Wang, J.
    Wu, N.
    KOVOVE MATERIALY-METALLIC MATERIALS, 2013, 51 (02): : 129 - 133
  • [46] Interface microstructure and strength properties of Ti-6Al-4V and microduplex stainless steel diffusion bonded joints
    Kundu, S.
    Sam, S.
    Chatterjee, S.
    MATERIALS & DESIGN, 2011, 32 (05) : 2997 - 3003
  • [47] Phase constitution near the interface zone of diffusion bonding for Fe3Al/Q235 dissimilar materials
    Li, YJ
    Wang, J
    Yin, YS
    Wu, HQ
    SCRIPTA MATERIALIA, 2002, 47 (12) : 851 - 856
  • [48] Shear strength and fracture characteristics near the interface of diffusion bonding of Fe3Al/Q235 dissimilar materials
    Li, Y. J.
    Wang, J.
    Ma, H. J.
    KOVOVE MATERIALY-METALLIC MATERIALS, 2012, 50 (02): : 83 - 88
  • [49] Bond Interface Analysis and Creep Behavior of Vacuum Diffusion Bonded P92 Steel and 316L Austenitic Stainless Steel
    Sharma, Gaurav
    Dwivedi, Dheerendra Kumar
    Sharma, Pratishtha
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2025, 78 (03)
  • [50] INTERFACE CHEMISTRY AND BONDING STRENGTH FOR DIFFUSION-BONDED FE/FE-FEO/AL2O3 SYSTEMS
    SAKATA, K
    HONMA, K
    OGAWA, K
    WATANABE, O
    NII, K
    JOURNAL OF MATERIALS SCIENCE, 1986, 21 (12) : 4463 - 4467
12345