Carbon-carbon composite bearing materials in hip arthroplasty: analysis of wear and biological response to wear debris

被引:31
|
作者
Howling, GI
Ingham, E
Sakoda, H
Stewart, TD
Fisher, J
Antonarulrajah, A
Appleyard, S
Rand, B
机构
[1] Univ Leeds, Old Med Sch, Div Microbiol, Leeds LS2 9NL, W Yorkshire, England
[2] Univ Leeds, Sch Mech Engn, Leeds LS2 9JT, W Yorkshire, England
[3] Univ Leeds, Dept Mat, Leeds LS2 9JT, W Yorkshire, England
基金
英国工程与自然科学研究理事会;
关键词
D O I
10.1023/B:JMSM.0000010102.26218.d1
中图分类号
R318 [生物医学工程];
学科分类号
0831 ;
摘要
Ultra-high molecular weight polyethylene wear particles have been implicated as the major cause of osteolysis, implant loosening and late aseptic failure in total hip arthroplasties in vivo. This study initially screened 22 carbon-carbon composite materials as alternatives for UHMWPE in joint bearings. New bearing materials should satisfy certain criteria-they should have good wear properties that at least match UHMWPE. and produce wear particles with low levels of cytotoxic and osteolytic activity. Initial screening was based on wear resistance determined in short-term tribological pin-on-plate tests. Three materials (HMU-PP(s), HMU-RC-P(s), and SMS-RC-P(s)) which had superior wear resistance were selected for long-term testing. All materials had very low wear factors and SMS-RC-P(s), which had a wear factor of 0.08+/-0.56x10(-7) mm(3)/Nm, was selected for the subsequent biological testing and particle size analysis. SMS-RC-P(s) showed good biocompatibility in bulk material form and also the wear particles had low cytotoxicity for L929 fibroblasts in culture compared to metal wear particles. Wear debris size analysis by transmission electron microscopy showed that the particles were very small, with the vast majority being under 100 nm in size, similar to metal wear particles. The potential osteolytic effect of SMS-RC-P(s) wear particles was investigated by culturing particles with human peripheral blood mononuclear cells and measuring TNFalpha production. SMS-RC-P(s) did not significantly stimulate TNFalpha production at a particle volume to cell number ratio of 80:1, indicating that the debris had a low osteolytic potential. The results of this study suggest that carbon-carbon composites, particularly those composed of PAN-based fibers may be important biomaterials in the development of next generation bearing surfaces for use in total joint replacements that have very low wear rates and reduced osteolytic and cytotoxic potential. (C) 2004 Kluwer Academic Publishers.
引用
收藏
页码:91 / 98
页数:8
相关论文
共 50 条
  • [41] Quantitative analysis of the wear and wear debris from low and high carbon content cobalt chrome alloys used in metal on metal total hip replacements
    J. L. Tipper
    P. J. Firkins
    E. Ingham
    J. Fisher
    M. H. Stone
    R. Farrar
    Journal of Materials Science: Materials in Medicine, 1999, 10 : 353 - 362
  • [42] Quantitative analysis of the wear and wear debris from low and high carbon content cobalt chrome alloys used in metal on metal total hip replacements
    Tipper, JL
    Firkins, PJ
    Ingham, E
    Fisher, J
    Stone, MH
    Farrar, R
    JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE, 1999, 10 (06) : 353 - 362
  • [43] EXPERIMENTAL STUDY OF CARBON-CARBON COMPOSITE-MATERIALS
    PERRY, JL
    ADAMS, DF
    JOURNAL OF MATERIALS SCIENCE, 1974, 9 (11) : 1764 - 1774
  • [44] Pyrolytic densification of porous carbon-carbon composite materials
    Tolbin, A. Yu.
    Spitsyn, B. V.
    Serdan, A. A.
    Averin, A. A.
    Malakho, A. P.
    Kepman, A. V.
    Sorokina, N. E.
    Avdeev, V. V.
    INORGANIC MATERIALS, 2013, 49 (01) : 49 - 56
  • [45] Pyrolytic densification of porous carbon-carbon composite materials
    A. Yu. Tolbin
    B. V. Spitsyn
    A. A. Serdan
    A. A. Averin
    A. P. Malakho
    A. V. Kepman
    N. E. Sorokina
    V. V. Avdeev
    Inorganic Materials, 2013, 49 : 49 - 56
  • [46] FRICTION AND WEAR OF CARBON BRAKE MATERIALS
    Tanner, John A.
    Travis, Matt
    DEVELOPMENTS IN ADVANCED CERAMICS AND COMPOSITES, 2005, 26 (08): : 167 - 178
  • [47] Case Report: Femoral Neuropathy Secondary to Total Hip Arthroplasty Wear Debris
    Fokter, Samo K.
    Repse-Fokter, Alenka
    Takac, Iztok
    CLINICAL ORTHOPAEDICS AND RELATED RESEARCH, 2009, 467 (11) : 3032 - 3035
  • [48] Inhibition of wear debris mediated osteolysis in a canine total hip arthroplasty model
    Shanbhag, AS
    Hasselman, CT
    Rubash, HE
    CLINICAL ORTHOPAEDICS AND RELATED RESEARCH, 1997, (344) : 33 - 43
  • [49] PERIPROSTHETIC OSTEOLYSIS IN TOTAL HIP-ARTHROPLASTY - THE ROLE OF PARTICULATE WEAR DEBRIS
    MALONEY, WJ
    SMITH, RL
    JOURNAL OF BONE AND JOINT SURGERY-AMERICAN VOLUME, 1995, 77 (09): : 1448 - 1461
  • [50] Wear behavior of UHMWPE sliding on artificial hip arthroplasty materials
    Cho, HJ
    Wei, WJ
    Kao, HC
    Cheng, CK
    MATERIALS CHEMISTRY AND PHYSICS, 2004, 88 (01) : 9 - 16