Effect of phosphate-based glass fibre surface properties on thermally produced poly(lactic acid) matrix composites

被引:20
|
作者
Mohammadi, Maziar Shah [1 ]
Ahmed, Ifty [2 ]
Muja, Naser [1 ]
Rudd, Christopher D. [2 ]
Bureau, Martin N. [1 ,3 ]
Nazhat, Showan N. [1 ]
机构
[1] McGill Univ, Dept Min & Mat Engn, Montreal, PQ H3A 2B2, Canada
[2] Univ Nottingham, Div Mech Mat & Struct, Nottingham NG7 2RD, England
[3] Natl Res Council Canada, Inst Ind Mat, Boucherville, PQ J4B 6Y4, Canada
基金
加拿大创新基金会; 加拿大自然科学与工程研究理事会;
关键词
IN-VITRO; MECHANICAL-PROPERTIES; SOFT-TISSUE; DEGRADATION; RELEASE; IRON; SCAFFOLDS; POLYMER; CELLS; HARD;
D O I
10.1007/s10856-011-4453-x
中图分类号
R318 [生物医学工程];
学科分类号
0831 ;
摘要
Incorporation of soluble bioactive glass fibres into biodegradable polymers is an interesting approach for bone repair and regeneration. However, the glass composition and its surface properties significantly affect the nature of the fibre-matrix interface and composite properties. Herein, the effect of Si and Fe on the surface properties of calcium containing phosphate based glasses (PGs) in the system (50P(2)O(5)-40CaO-(10-x)SiO2-xFe(2)O(3), where x = 0, 5 and 10 mol.%) were investigated. Contact angle measurements revealed a higher surface energy, and surface polarity as well as increased hydrophilicity for Si doped PG which may account for the presence of surface hydroxyl groups. Two PG formulations, 50P(2)O(5)-40CaO-10Fe(2)O(3) (Fe10) and 50P(2)O(5)-40CaO-5Fe(2)O(3)-5SiO(2) (Fe5Si5), were melt drawn into fibres and randomly incorporated into poly(lactic acid) (PLA) produced by melt processing. The ageing in deionised water (DW), mechanical property changes in phosphate buffered saline (PBS) and cytocompatibility properties of these composites were investigated. In contrast to Fe10 and as a consequence of the higher surface energy and polarity of Fe5Si5, its incorporation into PLA led to increased inorganic/organic interaction indicated by a reduction in the carbonyl group of the matrix. PLA chain scission was confirmed by a greater reduction in its molecular weight in PLA-Fe5Si5 composites. In DW, the dissolution rate of PLA-Fe5Si5 was significantly higher than that of PLA-Fe10. Dissolution of the glass fibres resulted in the formation of channels within the matrix. Initial flexural strength was significantly increased through PGF incorporation. After PBS ageing, the reduction in mechanical properties was greater for PLA-Fe5Si5 compared to PLA-Fe10. MC3T3-E1 preosteoblasts seeded onto PG discs, PLA and PLA-PGF composites were evaluated for up to 7 days indicating that the materials were generally cytocompatible. In addition, cell alignment along the PGF orientation was observed showing cell preference towards PGF.
引用
收藏
页码:2659 / 2672
页数:14
相关论文
共 50 条
  • [31] EFFECT OF DOPO-BASED COMPOUND ON THE FLAMMABILITY AND MECHANICAL PROPERTIES OF RAMIE/POLY(LACTIC ACID) COMPOSITES
    Yu, Tao
    Li, Yan
    20TH INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS, 2015,
  • [32] Structure, viscosity and fibre drawing properties of phosphate-based glasses: effect of boron and iron oxide addition
    Sharmin, Nusrat
    Rudd, Chris D.
    Parsons, Andrew J.
    Ahmed, Ifty
    JOURNAL OF MATERIALS SCIENCE, 2016, 51 (16) : 7523 - 7535
  • [33] Structure, viscosity and fibre drawing properties of phosphate-based glasses: effect of boron and iron oxide addition
    Nusrat Sharmin
    Chris D. Rudd
    Andrew J. Parsons
    Ifty Ahmed
    Journal of Materials Science, 2016, 51 : 7523 - 7535
  • [34] Effect of increasing titanium dioxide content on bulk and surface properties of phosphate-based glasses
    Abou Neel, Ensanya All
    Chrzanowski, Wojciech
    Knowles, Jonathan Campbell
    ACTA BIOMATERIALIA, 2008, 4 (03) : 523 - 534
  • [35] Preparation and characterization of composites based on poly(lactic acid)/poly(methyl methacrylate) matrix and sisal fiber bundles: The effect of annealing process
    Orue, Ander
    Anakabe, Jon
    Zaldua-Huici, Ane Miren
    Eceiza, Arantxa
    Arbelaiz, Aitor
    JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS, 2022, 35 (08) : 1132 - 1153
  • [36] DEVELOPMENT OF BASALT FIBRE AND MONTMORILLONITE NANOPARTICLE CO-REINFORCED POLY(LACTIC-ACID) MATRIX HYBRID COMPOSITES
    Meszaros, Laszlo
    Gonda, Bence
    9TH INTERNATIONAL CONFERENCE ON NANOMATERIALS - RESEARCH & APPLICATION (NANOCON 2017), 2018, : 212 - 217
  • [37] Surface chemical analysis of the effect of curing conditions on the properties of thermally-cured pigment printed poly (lactic acid) fabrics
    Karim, Mohammad Nazmul
    Rigout, Muriel
    Yeates, Stephen G.
    Carr, Chris
    DYES AND PIGMENTS, 2014, 103 : 168 - 174
  • [38] Effect of Heat Setting and Dyeing on Tensile Strength and Shrinkage Properties of Poly(Lactic Acid) Fibre
    Yuk-mei Chui
    Yu-chun Chuang
    Chi-wai Kan
    Fibers and Polymers, 2021, 22 : 2388 - 2393
  • [39] Effect of Heat Setting and Dyeing on Tensile Strength and Shrinkage Properties of Poly(Lactic Acid) Fibre
    Chui, Yuk-mei
    Chuang, Yu-chun
    Kan, Chi-wai
    FIBERS AND POLYMERS, 2021, 22 (09) : 2388 - 2393
  • [40] Effect of Filler Content on the Morphology and Physical Properties of Poly(Lactic Acid)-Hydroxyapatite Composites
    Tazibt, Nedjma
    Kaci, Mustapha
    Dehouche, Nadjet
    Ragoubi, Mohamed
    Atanase, Leonard Ionut
    MATERIALS, 2023, 16 (02)