Effect of phosphate-based glass fibre surface properties on thermally produced poly(lactic acid) matrix composites

被引:20
|
作者
Mohammadi, Maziar Shah [1 ]
Ahmed, Ifty [2 ]
Muja, Naser [1 ]
Rudd, Christopher D. [2 ]
Bureau, Martin N. [1 ,3 ]
Nazhat, Showan N. [1 ]
机构
[1] McGill Univ, Dept Min & Mat Engn, Montreal, PQ H3A 2B2, Canada
[2] Univ Nottingham, Div Mech Mat & Struct, Nottingham NG7 2RD, England
[3] Natl Res Council Canada, Inst Ind Mat, Boucherville, PQ J4B 6Y4, Canada
基金
加拿大创新基金会; 加拿大自然科学与工程研究理事会;
关键词
IN-VITRO; MECHANICAL-PROPERTIES; SOFT-TISSUE; DEGRADATION; RELEASE; IRON; SCAFFOLDS; POLYMER; CELLS; HARD;
D O I
10.1007/s10856-011-4453-x
中图分类号
R318 [生物医学工程];
学科分类号
0831 ;
摘要
Incorporation of soluble bioactive glass fibres into biodegradable polymers is an interesting approach for bone repair and regeneration. However, the glass composition and its surface properties significantly affect the nature of the fibre-matrix interface and composite properties. Herein, the effect of Si and Fe on the surface properties of calcium containing phosphate based glasses (PGs) in the system (50P(2)O(5)-40CaO-(10-x)SiO2-xFe(2)O(3), where x = 0, 5 and 10 mol.%) were investigated. Contact angle measurements revealed a higher surface energy, and surface polarity as well as increased hydrophilicity for Si doped PG which may account for the presence of surface hydroxyl groups. Two PG formulations, 50P(2)O(5)-40CaO-10Fe(2)O(3) (Fe10) and 50P(2)O(5)-40CaO-5Fe(2)O(3)-5SiO(2) (Fe5Si5), were melt drawn into fibres and randomly incorporated into poly(lactic acid) (PLA) produced by melt processing. The ageing in deionised water (DW), mechanical property changes in phosphate buffered saline (PBS) and cytocompatibility properties of these composites were investigated. In contrast to Fe10 and as a consequence of the higher surface energy and polarity of Fe5Si5, its incorporation into PLA led to increased inorganic/organic interaction indicated by a reduction in the carbonyl group of the matrix. PLA chain scission was confirmed by a greater reduction in its molecular weight in PLA-Fe5Si5 composites. In DW, the dissolution rate of PLA-Fe5Si5 was significantly higher than that of PLA-Fe10. Dissolution of the glass fibres resulted in the formation of channels within the matrix. Initial flexural strength was significantly increased through PGF incorporation. After PBS ageing, the reduction in mechanical properties was greater for PLA-Fe5Si5 compared to PLA-Fe10. MC3T3-E1 preosteoblasts seeded onto PG discs, PLA and PLA-PGF composites were evaluated for up to 7 days indicating that the materials were generally cytocompatible. In addition, cell alignment along the PGF orientation was observed showing cell preference towards PGF.
引用
收藏
页码:2659 / 2672
页数:14
相关论文
共 50 条
  • [21] Effect of Layout Sequence on the Integrity of Poly-lactic Acid and Rice Straw Fibre Composites
    Saidi, Melissa Augustine
    Gorin, Alexander
    Heng, Soon Kok
    Jayamani, Elammaran
    MATERIALS TODAY-PROCEEDINGS, 2017, 4 (02) : 3150 - 3157
  • [22] Effect of the glass melting condition on the processing of phosphate-based glass-ceramics with persistent luminescence properties
    Massera, J.
    Gaussiran, M.
    Gluchowski, P.
    Lastusaari, M.
    Petit, L.
    Holsa, J.
    Hupa, L.
    OPTICAL MATERIALS, 2016, 52 : 56 - 61
  • [23] Flexural Properties of Wet-Laid Hybrid Nonwoven Recycled Carbon and Flax Fibre Composites in Poly-Lactic Acid Matrix
    Tse, Barbara
    Yu, Xueli
    Gong, Hugh
    Soutis, Constantinos
    AEROSPACE, 2018, 5 (04)
  • [24] Preparation and Characterization of Composites Based on Poly (Butylene Succinate) and Poly (Lactic Acid) Grafted Tetracalcium Phosphate
    Fan, Rang Rang
    Zhou, Liang Xue
    Li, De Xia
    Zhang, Dong Mei
    Wu, Min
    Guo, Gang
    JOURNAL OF MACROMOLECULAR SCIENCE PART B-PHYSICS, 2014, 53 (02): : 296 - 308
  • [25] Model Composites Based on Poly(lactic acid) and Bioactive Glass Fillers for Bone Regeneration
    Lacambra-Andreu, Xavier
    Dergham, Nora
    Magallanes-Perdomo, Marlin
    Meille, Sylvain
    Chevalier, Jerome
    Chenal, Jean-Marc
    Maazouz, Abderrahim
    Lamnawar, Khalid
    POLYMERS, 2021, 13 (17)
  • [26] Effect of surface-modified silica on the thermal and mechanical behaviors of poly(lactic acid) and chemically crosslinked poly(lactic acid) composites
    Prapruddivongs, Chana
    Rukrabiab, Jatsada
    Kulwongwit, Nuth
    Wongpreedee, Thapanee
    JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS, 2020, 33 (12) : 1692 - 1706
  • [27] Effect of diisocyanates as compatibilizer on the properties of ramie/poly(lactic acid) (PLA) composites
    Yu, Tao
    Hu, Changqing
    Chen, Xunjian
    Li, Yan
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2015, 76 : 20 - 27
  • [28] Control interfacial properties and tensile strength of glass fibre/PP composites by grafting poly(ethylene glycol) chains on glass fibre surface
    Liu, Zeyu
    Hao, Bin
    Zhang, Yagang
    RSC ADVANCES, 2015, 5 (51): : 40668 - 40677
  • [29] Effect of surface treatments on properties of lacquer seed shell fiber-reinforced poly(lactic acid) composites
    Zhou, Yang
    Long, Chunguang
    Huang, Jialiang
    Deng, Zhigang
    Cao, Taishan
    JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2013, 32 (18) : 1348 - 1358
  • [30] Composition dependence in surface properties of poly(lactic acid)/graphene/carbon nanotube composites
    Ivanova, Radost
    Kotsilkova, Rumiana
    Ivanov, Evgeni
    Donato, Ricardo K.
    Fechine, Guilhermino J. M.
    Andrade, Ricardo J. E.
    di Maio, Rosa
    Silvestre, Clara
    MATERIALS CHEMISTRY AND PHYSICS, 2020, 249