Effect of phosphate-based glass fibre surface properties on thermally produced poly(lactic acid) matrix composites

被引:20
|
作者
Mohammadi, Maziar Shah [1 ]
Ahmed, Ifty [2 ]
Muja, Naser [1 ]
Rudd, Christopher D. [2 ]
Bureau, Martin N. [1 ,3 ]
Nazhat, Showan N. [1 ]
机构
[1] McGill Univ, Dept Min & Mat Engn, Montreal, PQ H3A 2B2, Canada
[2] Univ Nottingham, Div Mech Mat & Struct, Nottingham NG7 2RD, England
[3] Natl Res Council Canada, Inst Ind Mat, Boucherville, PQ J4B 6Y4, Canada
基金
加拿大创新基金会; 加拿大自然科学与工程研究理事会;
关键词
IN-VITRO; MECHANICAL-PROPERTIES; SOFT-TISSUE; DEGRADATION; RELEASE; IRON; SCAFFOLDS; POLYMER; CELLS; HARD;
D O I
10.1007/s10856-011-4453-x
中图分类号
R318 [生物医学工程];
学科分类号
0831 ;
摘要
Incorporation of soluble bioactive glass fibres into biodegradable polymers is an interesting approach for bone repair and regeneration. However, the glass composition and its surface properties significantly affect the nature of the fibre-matrix interface and composite properties. Herein, the effect of Si and Fe on the surface properties of calcium containing phosphate based glasses (PGs) in the system (50P(2)O(5)-40CaO-(10-x)SiO2-xFe(2)O(3), where x = 0, 5 and 10 mol.%) were investigated. Contact angle measurements revealed a higher surface energy, and surface polarity as well as increased hydrophilicity for Si doped PG which may account for the presence of surface hydroxyl groups. Two PG formulations, 50P(2)O(5)-40CaO-10Fe(2)O(3) (Fe10) and 50P(2)O(5)-40CaO-5Fe(2)O(3)-5SiO(2) (Fe5Si5), were melt drawn into fibres and randomly incorporated into poly(lactic acid) (PLA) produced by melt processing. The ageing in deionised water (DW), mechanical property changes in phosphate buffered saline (PBS) and cytocompatibility properties of these composites were investigated. In contrast to Fe10 and as a consequence of the higher surface energy and polarity of Fe5Si5, its incorporation into PLA led to increased inorganic/organic interaction indicated by a reduction in the carbonyl group of the matrix. PLA chain scission was confirmed by a greater reduction in its molecular weight in PLA-Fe5Si5 composites. In DW, the dissolution rate of PLA-Fe5Si5 was significantly higher than that of PLA-Fe10. Dissolution of the glass fibres resulted in the formation of channels within the matrix. Initial flexural strength was significantly increased through PGF incorporation. After PBS ageing, the reduction in mechanical properties was greater for PLA-Fe5Si5 compared to PLA-Fe10. MC3T3-E1 preosteoblasts seeded onto PG discs, PLA and PLA-PGF composites were evaluated for up to 7 days indicating that the materials were generally cytocompatible. In addition, cell alignment along the PGF orientation was observed showing cell preference towards PGF.
引用
收藏
页码:2659 / 2672
页数:14
相关论文
共 50 条
  • [1] Effect of phosphate-based glass fibre surface properties on thermally produced poly(lactic acid) matrix composites
    Maziar Shah Mohammadi
    Ifty Ahmed
    Naser Muja
    Christopher D. Rudd
    Martin N. Bureau
    Showan N. Nazhat
    Journal of Materials Science: Materials in Medicine, 2011, 22 : 2659 - 2672
  • [2] Effect of surface modification of β-tricalcium phosphate on mechanical properties of poly(L-lactic acid) composites
    Kobayashi, Satoshi
    Nagao, Risa
    ADVANCED COMPOSITE MATERIALS, 2015, 24 (05) : 467 - 480
  • [3] Effect of iron on the surface, degradation and ion release properties of phosphate-based glass fibres
    Abou Neel, EA
    Ahmed, I
    Blaker, JJ
    Bismarck, A
    Boccaccini, AR
    Lewis, MP
    Nazhat, SN
    Knowles, JC
    ACTA BIOMATERIALIA, 2005, 1 (05) : 553 - 563
  • [4] Effect of Surface Functionalization of Hemp Fiber on Mechanical Properties of Fiber and Composites with Poly Lactic Acid (PLA) Matrix
    Oza, S.
    Carlson, A.
    Tajabadi, M. G.
    Lu, N.
    PROCEEDINGS OF THE AMERICAN SOCIETY FOR COMPOSITES, 2013,
  • [5] THE EFFECT OF THE FIBER/MATRIX INTERFACE ON THE MECHANICAL PROPERTIES OF CERAMIC-REINFORCED ZIRCONIA PHOSPHATE-BASED MATRIX COMPOSITES
    Bender, Barry
    MECHANICAL PROPERTIES AND PERFORMANCE OF ENGINEERING CERAMICS AND COMPOSITES II, 2007, 27 (02): : 183 - 194
  • [6] Effect of fiber surface-treatments on the properties of poly(lactic acid)/ramie composites
    Yu, Tao
    Ren, Jie
    Li, Shumao
    Yuan, Hua
    Li, Yan
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2010, 41 (04) : 499 - 505
  • [7] Accelerated in vitro degradation properties of polylactic acid/phosphate glass fibre composites
    Reda M. Felfel
    Kazi M. Zakir Hossain
    Andrew J. Parsons
    Chris D. Rudd
    Ifty Ahmed
    Journal of Materials Science, 2015, 50 : 3942 - 3955
  • [8] Accelerated in vitro degradation properties of polylactic acid/phosphate glass fibre composites
    Felfel, Reda M.
    Hossain, Kazi M. Zakir
    Parsons, Andrew J.
    Rudd, Chris D.
    Ahmed, Ifty
    JOURNAL OF MATERIALS SCIENCE, 2015, 50 (11) : 3942 - 3955
  • [9] Poly L, DL-lactic acid, and composite poly l, DL-lactic acid/β-tricalcium phosphate-based bioabsorbable interference screw
    Santos, Alex E.
    Braccialli, Alex L.
    Vilela, Julio
    Foschini, Cesar R.
    Sanchez, Luiz E. A.
    POLYMER COMPOSITES, 2019, 40 (06) : 2197 - 2207
  • [10] Investigating the properties of maleated poly(lactic acid) and its effect on poly(lactic acid)/cellulose nanofiber composites
    Ghasemi, Somayeh
    Behrooz, Rabi
    Ghasemi, Ismail
    JOURNAL OF POLYMER ENGINEERING, 2018, 38 (04) : 391 - 398