Optimization of Zn-Al-Fe Alloy Vacuum Distillation Experiments by Response Surface Methodology

被引：0
|
作者：
Pu, Zhenghao [1 ,2 ,3 ]
Li, Yifu [1 ,2 ,3 ]
Yang, Bin [1 ,2 ,3 ]
Zhang, Huan [1 ,2 ,3 ]
机构：
[1] Kunming Univ Sci & Technol, Natl Engn Lab Vacuum Met, Kunming 650093, Yunnan, Peoples R China
[2] Kunming Univ Sci & Technol, Fac Met & Energy Engn, Kunming 650093, Yunnan, Peoples R China
[3] Kunming Univ Sci & Technol, State Key Lab Complex Nonferrous Met Resources Cl, Kunming 650093, Yunnan, Peoples R China
来源：
10TH INTERNATIONAL SYMPOSIUM ON HIGH-TEMPERATURE METALLURGICAL PROCESSING | 2019年
基金：
中国国家自然科学基金;
关键词：
Zn-Al-Fe alloy; Vacuum distillation; Response surface;
D O I：
10.1007/978-3-030-05955-2_32
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Vacuum distillation of Zn-Al-Fe alloy was discussed based on the experimental investigations of the distillation temperature, the holding time and the pressure of pressing block by response surface methodology. The experimental results showed that zinc can be satisfactorily obtained from Zn-Al-Fe alloy with suitable distillation temperature, holding time and the pressure of pressing block. The zinc in Zn-Al-Fe alloy was effectively recovered at 1073-1123 K for 60-75 min, and pressure of pressing block was below 50 MPa. When the temperature was 1073 K, the holding time was 75 min and the pressure of pressing block was 40 MPa, the zinc content in the volatiles was about 98.35% and the aluminium content in the residue was about 92.22%.
引用
收藏
页码：341 / 348
页数：8
相关论文
共 50 条
  • [31] Process Parameter Optimization of a Laser Clad Fe-Based Alloy Using Response Surface Methodology (RSM)
    Lin, J.-Y.
    Han, B.
    Han, X.-R.
    Wang, H.
    Cui, W.-H.
    Lasers in Engineering, 2021, 51 (01) : 279 - 298
  • [32] Phase Equilibria for a Zn-Ag Alloy during Vacuum Distillation
    Korolev, A. A.
    Timofeev, K. L.
    Maltsev, G. I.
    RUSSIAN METALLURGY, 2021, 2021 (08): : 978 - 986
  • [33] Process parameters optimization of friction stir processed Al 1050 aluminum alloy by response surface methodology (RSM)
    Maboud, Ahmed Abdel Ghaffar Abdel
    El-Mahallawy, Nahed A.
    Zoalfakar, Said H.
    MATERIALS RESEARCH EXPRESS, 2019, 6 (02)
  • [34] Optimization of the vacuum dehydration of celery (Apium graveolens) using the response surface methodology
    Madamba, PS
    Liboon, FA
    DRYING TECHNOLOGY, 2001, 19 (3-4) : 611 - 626
  • [35] Optimization of the Experimental Parameters Affecting the Corrosion Behavior for Mg–Y–Zn–Mn Alloy via Response Surface Methodology
    Lisha Wang
    Jinghua Jiang
    Bassiouny Saleh
    Reham Fathi
    He Huang
    Huan Liu
    Aibin Ma
    Metals and Materials International, 2021, 27 : 5095 - 5107
  • [36] Optimization of vacuum pulse osmotic dehydration of cantaloupe using response surface methodology
    Fermin, WJ
    Corzo, O
    JOURNAL OF FOOD PROCESSING AND PRESERVATION, 2005, 29 (01) : 20 - 32
  • [37] Optimization of benzene removal by air gap membrane distillation using response surface methodology
    Pedram, Sara
    Mortaheb, Hamid Reza
    Arefi-Khonsa, Faranzaneh
    JOURNAL OF WATER SUPPLY RESEARCH AND TECHNOLOGY-AQUA, 2019, 68 (04): : 231 - 242
  • [38] Optimization of end milling parameters for Al/SiC by response surface methodology
    Krishna, M. Vamsi
    Xavior, M. Anthony
    Journal of Advanced Microscopy Research, 2015, 10 (03) : 208 - 218
  • [39] Optimization of Experiments for Microwave Drying of Hydrometallurgy Mud Using Response Surface Methodology
    Guo Lin
    Tu Hu
    Jinhui Peng
    Shaohua Yin
    Libo Zhang
    Wenqian Guo
    Yuhang Liu
    Arabian Journal for Science and Engineering, 2016, 41 : 569 - 576
  • [40] Optimization of Experiments for Microwave Drying of Hydrometallurgy Mud Using Response Surface Methodology
    Lin, Guo
    Hu, Tu
    Peng, Jinhui
    Yin, Shaohua
    Zhang, Libo
    Guo, Wenqian
    Liu, Yuhang
    ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 2016, 41 (02) : 569 - 576
12345