Optimization of Zn-Al-Fe Alloy Vacuum Distillation Experiments by Response Surface Methodology

被引：0
|
作者：
Pu, Zhenghao [1 ,2 ,3 ]
Li, Yifu [1 ,2 ,3 ]
Yang, Bin [1 ,2 ,3 ]
Zhang, Huan [1 ,2 ,3 ]
机构：
[1] Kunming Univ Sci & Technol, Natl Engn Lab Vacuum Met, Kunming 650093, Yunnan, Peoples R China
[2] Kunming Univ Sci & Technol, Fac Met & Energy Engn, Kunming 650093, Yunnan, Peoples R China
[3] Kunming Univ Sci & Technol, State Key Lab Complex Nonferrous Met Resources Cl, Kunming 650093, Yunnan, Peoples R China
来源：
10TH INTERNATIONAL SYMPOSIUM ON HIGH-TEMPERATURE METALLURGICAL PROCESSING | 2019年
基金：
中国国家自然科学基金;
关键词：
Zn-Al-Fe alloy; Vacuum distillation; Response surface;
D O I：
10.1007/978-3-030-05955-2_32
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Vacuum distillation of Zn-Al-Fe alloy was discussed based on the experimental investigations of the distillation temperature, the holding time and the pressure of pressing block by response surface methodology. The experimental results showed that zinc can be satisfactorily obtained from Zn-Al-Fe alloy with suitable distillation temperature, holding time and the pressure of pressing block. The zinc in Zn-Al-Fe alloy was effectively recovered at 1073-1123 K for 60-75 min, and pressure of pressing block was below 50 MPa. When the temperature was 1073 K, the holding time was 75 min and the pressure of pressing block was 40 MPa, the zinc content in the volatiles was about 98.35% and the aluminium content in the residue was about 92.22%.
引用
收藏
页码：341 / 348
页数：8
相关论文
共 50 条
  • [21] Machinability characteristics in Zn-40Al alloy: The effect of addition of copper and silicon and optimization of cutting parameters using response surface methodology
    Bayraktar, Şenol (senol.bayraktar@erdogan.edu.tr), 1600, Elsevier Ltd (1010):
  • [22] Machinability characteristics in Zn-40Al alloy: The effect of addition of copper and silicon and optimization of cutting parameters using response surface methodology
    Bayraktar, Senol
    Pehlivan, Gulsah
    JOURNAL OF ALLOYS AND COMPOUNDS, 2025, 1010
  • [23] Optimization of wear and hardness of Al-Zn-Mg-Cu alloy fabricated from recycled beverage can using response surface methodology
    Kazeem, Abubakar
    Badarulzaman, Nur Azam
    Ali, Wan Fahmin Faiz Wan
    SN APPLIED SCIENCES, 2020, 2 (07):
  • [24] Phase Equilibria for a Zn–Ag Alloy during Vacuum Distillation
    A. A. Korolev
    K. L. Timofeev
    G. I. Maltsev
    Russian Metallurgy (Metally), 2021, 2021 : 978 - 986
  • [25] Effects of structural charges on points of zero charge and intrinsic surface reaction equilibrium constants of Zn-Al and Zn-Al-Fe hydrotalcite-like compounds
    Jiao, Yan-Ni
    Hou, Wan-Guo
    COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS, 2007, 296 (1-3) : 62 - 66
  • [26] CAE SIMULATION AND RESPONSE SURFACE METHODOLOGY FOR OPTIMIZATION OF VACUUM CASTING PROCESS
    Radu, Sever-Adrian
    Panc, Nicolae
    Leordean, Vasile Danut
    ACTA TECHNICA NAPOCENSIS SERIES-APPLIED MATHEMATICS MECHANICS AND ENGINEERING, 2011, 54 (01): : 201 - 204
  • [27] Application of response surface methodology for modeling and optimization of membrane distillation desalination process
    Boubakri, Ali
    Hafiane, Amor
    Bouguecha, Salah Al Tahar
    JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY, 2014, 20 (05) : 3163 - 3169
  • [28] Modelling and optimization of aging parameters for thermal properties of Al 6082 alloy using response surface methodology
    Vishwakarma, Devendra Kumar
    Kumar, Narendra
    Padap, Aditya Kumar
    MATERIALS RESEARCH EXPRESS, 2017, 4 (04):
  • [29] Adsorptive removal of P(V) and Cr(VI) by calcined Zn-Al-Fe ternary LDHs
    Rezak, Nacera
    Bahmani, Abdellah
    Bettahar, Nourredine
    WATER SCIENCE AND TECHNOLOGY, 2021, 83 (10) : 2504 - 2517
  • [30] Process Parameter Optimization of a Laser Clad Fe-Based Alloy Using Response Surface Methodology (RSM)
    Lin, J-Y
    Han, B.
    Han, X-R
    Wang, H.
    Cui, W-H
    LASERS IN ENGINEERING, 2021, 51 (1-5) : 279 - 298
12345