Optimization of Zn-Al-Fe Alloy Vacuum Distillation Experiments by Response Surface Methodology

被引：0
|
作者：
Pu, Zhenghao [1 ,2 ,3 ]
Li, Yifu [1 ,2 ,3 ]
Yang, Bin [1 ,2 ,3 ]
Zhang, Huan [1 ,2 ,3 ]
机构：
[1] Kunming Univ Sci & Technol, Natl Engn Lab Vacuum Met, Kunming 650093, Yunnan, Peoples R China
[2] Kunming Univ Sci & Technol, Fac Met & Energy Engn, Kunming 650093, Yunnan, Peoples R China
[3] Kunming Univ Sci & Technol, State Key Lab Complex Nonferrous Met Resources Cl, Kunming 650093, Yunnan, Peoples R China
来源：
10TH INTERNATIONAL SYMPOSIUM ON HIGH-TEMPERATURE METALLURGICAL PROCESSING | 2019年
基金：
中国国家自然科学基金;
关键词：
Zn-Al-Fe alloy; Vacuum distillation; Response surface;
D O I：
10.1007/978-3-030-05955-2_32
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Vacuum distillation of Zn-Al-Fe alloy was discussed based on the experimental investigations of the distillation temperature, the holding time and the pressure of pressing block by response surface methodology. The experimental results showed that zinc can be satisfactorily obtained from Zn-Al-Fe alloy with suitable distillation temperature, holding time and the pressure of pressing block. The zinc in Zn-Al-Fe alloy was effectively recovered at 1073-1123 K for 60-75 min, and pressure of pressing block was below 50 MPa. When the temperature was 1073 K, the holding time was 75 min and the pressure of pressing block was 40 MPa, the zinc content in the volatiles was about 98.35% and the aluminium content in the residue was about 92.22%.
引用
收藏
页码：341 / 348
页数：8
相关论文
共 50 条
  • [1] Application of the Wilson Equation for Zn-Al-Fe Alloy in Vacuum Distillation
    Pu, Zhenghao
    Han, Jibiao
    Li, Yifu
    Yang, Bin
    Dai, Yongnian
    MATERIALS TRANSACTIONS, 2018, 59 (03) : 443 - 449
  • [2] Process optimization for vacuum distillation of Sn-Sb alloy by response surface methodology
    Wang, Anxiang
    Li, Yifu
    Yang, Bin
    Xu, Baoqiang
    Kong, Lingxin
    Liu, Dachun
    VACUUM, 2014, 109 : 127 - 134
  • [3] OPTIMIZATION OF SELF-HEATED VACUUM MEMBRANE DISTILLATION USING RESPONSE SURFACE METHODOLOGY
    Rahmadhanty, Shaneza Fatma
    Subrahmanya, T. M.
    Hung, Wei-Song
    Lin, Po Ting
    PROCEEDINGS OF ASME 2022 INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES AND COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE, IDETC-CIE2022, VOL 3B, 2022,
  • [4] Optimization of the Vacuum Fractional Distillation Process for Enhancing the α-Guaiene of Patchouli Oil with Response Surface Methodology
    Widyasanti, Asri
    Nurjanah, Sarifah
    Nurhadi, Bambang
    Osman, Che Puteh
    SEPARATIONS, 2023, 10 (09)
  • [5] Modeling and optimization of solar thermal-photovoltaic vacuum membrane distillation system by response surface methodology
    Deng, Hongling
    Yang, Xiaohong
    Tian, Rui
    Hu, Junhu
    Zhang, Bo
    Cui, Fangda
    Guo, Guangyu
    SOLAR ENERGY, 2020, 195 : 230 - 238
  • [6] Ab Initio MOLECULAR DYNAMIC SIMULATION OF Zn-Al-Fe ALLOYS
    Zhang, H.
    Zhao, J.
    Pu, Z.
    Li, Y.
    Xu, B. Q.
    Yang, B.
    JOURNAL OF MINING AND METALLURGY SECTION B-METALLURGY, 2019, 55 (01) : 79 - 84
  • [7] Fe solubility in the Zn-rich corner of the Zn-Al-Fe system for use in continuous galvanizing and galvannealing
    McDermid, J. R.
    Kaye, M. H.
    Thompson, W. T.
    METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2007, 38 (02): : 215 - 230
  • [8] The Application of Response Surface Methodology for the Optimization of an Extractive Distillation Process
    Biglari, Mazda
    Langstaff, Andrew
    Elkamel, Ali
    PETROLEUM SCIENCE AND TECHNOLOGY, 2010, 28 (17) : 1788 - 1798
  • [9] Fe Solubility in the Zn-Rich Corner of the Zn-Al-Fe System for Use in Continuous Galvanizing and Galvannealing
    J.R. McDermid
    M.H. Kaye
    W.T. Thompson
    Metallurgical and Materials Transactions B, 2007, 38 : 215 - 230
  • [10] Optimization of wear and hardness of Al–Zn–Mg–Cu alloy fabricated from recycled beverage can using response surface methodology
    Abubakar Kazeem
    Nur Azam Badarulzaman
    Wan Fahmin Faiz Wan Ali
    SN Applied Sciences, 2020, 2
12345