INFLUENCE OF DIFFERENT SHAFT SURFACE FINISHES ON THE LUBRICATION AND FRICTION CONDITION OF ELASTOMERIC LIP SEALS

被引：0

作者：

Schulz, Markus ^{[1
]}

Baumann, Matthias ^{[1
]}

Bauer, Frank ^{[1
]}

机构：

[1] Univ Stuttgart, Inst Machine Components IMA, Stuttgart, Germany

来源：

7TH INTERNATIONAL CONFERENCE INTEGRITY-RELIABILITY-FAILURE (IRF2020) | 2020年

关键词：

elastomeric lip seals; lubrication; friction; duty parameter; belt grinding; superfinishing;

D O I：

暂无

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The duty parameter diagram is a common tool to compare and analyse the lubrication and friction condition of different radial shaft sealing systems. In addition, it also allows an evaluation of the suitability of differently manufactured sealing counterfaces. This paper deals with the influences of different shaft surface structures on the formation of a lubricating film and a sealing gap. For this purpose, friction torque measurements were carried out, starting from very low sliding speeds of about 0.0042 m/s (corresponds to 1 rpm at a shaft diameter of 80 mm) up to 10.5 m/s. The aim is to cover the mixed friction area in addition to the liquid friction area and thus determine the position of the transition point between both friction states.

引用

页码：351 / 368

页数：18

共 50 条

[41] Theoretical concept for in-situ condition monitoring of rotary shaft seals using surface strain-based analysis of the deformation state
Stiemcke, Y.
Thielen, S.
Koch, O.
FORSCHUNG IM INGENIEURWESEN-ENGINEERING RESEARCH, 2025, 89 (01):
[42] Magnetic memory phenomenon of the pure iron specimens surface under the different friction condition
Zhao, Kun-Peng
Fan, Jian-Chun
Shang, Qiang
Gao, Fu-Min
Hu, Zhi-Bin
Mocaxue Xuebao/Tribology, 2015, 35 (02): : 221 - 227
[43] Friction surfacing of aluminum to steel: Influence of different substrate surface topographies
Roos, Arne
Metternich, Franziska
Kallien, Zina
Baumann, Jonas
Ehrich, Jonas
Kipp, Monika
Hanke, Stefanie
Biermann, Dirk
Klusemann, Benjamin
MATERIALS & DESIGN, 2023, 235
[44] A preparation method of porous surface nitrile butadiene rubber with low friction coefficient under water lubrication condition by salt leaching
Jin, Da
Xiao, Ke
Han, Yanfeng
Xiang, Guo
Zhou, Zhen
Wang, Jiaxu
JOURNAL OF APPLIED POLYMER SCIENCE, 2021, 138 (23)
[45] The Influence of Scratches on the Tribological Performance of Friction Pairs Made of Different Materials under Water-Lubrication Conditions
Liang, Qingchen
Liang, Peng
Guo, Feng
Li, Shuyi
Zhang, Xiaohan
Jiang, Fulin
LUBRICANTS, 2023, 11 (10)
[46] Influence of friction on the surface characteristics of EPDM elastomers with different carbon black contents
Martinez, L.
Nevshupa, R.
Felhoes, D.
de Segovia, J. L.
Roman, E.
TRIBOLOGY INTERNATIONAL, 2011, 44 (09) : 996 - 1003
[47] Experimental analysis of friction properties in omega seals: Influence of a coated surface on deformation and contact topography under compressed conditions
Shina, K. H.
Yoon, J. H.
Cho, Y. J.
Parka, Y. W.
Yuna, J. H.
Limb, D. K.
Parkb, H. K.
Parkc, J. H.
Kim, H. D.
TRIBOLOGY INTERNATIONAL, 2023, 190
[48] Lubrication performance of 5CB liquid crystal combined with different wear-resistant coatings on friction surface
Cui, Qihang
Wang, Jingsi
Wang, Jiayuan
Li, Chengdi
Shen, Yan
Liew, Pay Jun
Xu, Jiujun
TRIBOLOGY INTERNATIONAL, 2025, 204
[49] Both Hyaluronan and Collagen Type II Keep Proteoglycan 4 (Lubricin) at the Cartilage Surface in a Condition That Provides Low Friction during Boundary Lubrication
Majd, Sara Ehsani
Kuijer, Roel
Koewitsch, Alexander
Groth, Thomas
Schmidt, Tannin A.
Sharma, Prashant K.
LANGMUIR, 2014, 30 (48) : 14566 - 14572
[50] Investigating the Friction Behavior of Turn-Milled High Friction Surface Microstructures under Different Tribological Influence Factors
Schanner, Jonathan
Funke, Roman
Schubert, Andreas
Hasse, Alexander
JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING, 2022, 6 (06):

← 1 2 3 4 5 →