INFLUENCE OF DIFFERENT SHAFT SURFACE FINISHES ON THE LUBRICATION AND FRICTION CONDITION OF ELASTOMERIC LIP SEALS

被引：0
|
作者：
Schulz, Markus [1 ]
Baumann, Matthias [1 ]
Bauer, Frank [1 ]
机构：
[1] Univ Stuttgart, Inst Machine Components IMA, Stuttgart, Germany
来源：
7TH INTERNATIONAL CONFERENCE INTEGRITY-RELIABILITY-FAILURE (IRF2020) | 2020年
关键词：
elastomeric lip seals; lubrication; friction; duty parameter; belt grinding; superfinishing;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The duty parameter diagram is a common tool to compare and analyse the lubrication and friction condition of different radial shaft sealing systems. In addition, it also allows an evaluation of the suitability of differently manufactured sealing counterfaces. This paper deals with the influences of different shaft surface structures on the formation of a lubricating film and a sealing gap. For this purpose, friction torque measurements were carried out, starting from very low sliding speeds of about 0.0042 m/s (corresponds to 1 rpm at a shaft diameter of 80 mm) up to 10.5 m/s. The aim is to cover the mixed friction area in addition to the liquid friction area and thus determine the position of the transition point between both friction states.
引用
收藏
页码：351 / 368
页数：18
相关论文
共 50 条
  • [21] Influence of surface form deviations on friction in mixed lubrication
    Fricke, S.
    Hager, C.
    Solovyev, S.
    Wangenheim, M.
    Wallaschek, J.
    TRIBOLOGY INTERNATIONAL, 2018, 118 : 491 - 499
  • [22] The effect of axial position of contact zone on the performance of radial lip seals with a texturing shaft surface
    Guo, Fei
    Jia, Xiaohong
    Wang, Longke
    Wang, Yuming
    TRIBOLOGY INTERNATIONAL, 2016, 97 : 499 - 508
  • [23] Influence of different surface modification technologies on friction of conformal tribopair in mixed and boundary lubrication regimes
    Nilsson, Daniel
    Prakash, Braham
    WEAR, 2011, 273 (01) : 75 - 81
  • [24] INFLUENCE OF SURFACE-ROUGHNESS ON FRICTION AND WEAR IN BOUNDARY LUBRICATION
    HISAKADO, T
    JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 1978, 20 (05): : 247 - 254
  • [25] Active friction control in lubrication condition using novel metal morphing surface
    Murashima, Motoyuki
    Imaizumi, Yusuke
    Murase, Ryo
    Umehara, Noritsugu
    Tokoroyama, Takayuki
    Saito, Toshiyuki
    Takeshima, Masayuki
    TRIBOLOGY INTERNATIONAL, 2021, 156
  • [26] Friction and surface morphological studies in plastic deformation under boundary lubrication condition
    Banerjee, RK
    Jagga, CR
    Sethuramiah, A
    TRIBOLOGY TRANSACTIONS, 2001, 44 (02) : 233 - 241
  • [27] Analysis of Influence of Surface Texture Type on Lubrication and Friction Reduction Performance of Friction Pair
    Zhao Zhangxing
    Long Wei
    Ren Pu
    Lei Jilin
    CHINA SURFACE ENGINEERING, 2022, 35 (01) : 173 - 182
  • [28] INFLUENCE OF SURFACE TEXTURE PARAMETERS ON FRICTION CHARACTERISTICS UNDER STARVED LUBRICATION
    Wu, Shen
    Zhang, Pan
    Wei, Haijun
    Chen, Lei
    POLISH MARITIME RESEARCH, 2020, 27 (02) : 96 - 106
  • [29] Tribological properties of surface microtexture friction pairs under different lubrication conditions
    Wang, Lili
    Zhao, Xingtang
    Guo, Shaohui
    Wang, Min
    ADVANCES IN MECHANICAL ENGINEERING, 2019, 11 (10)
  • [30] Influence of chromium diffusion and different surface finishes on the oxidation behaviour of chromium steels
    Piehl, C
    Toekei, Z
    Grabke, HJ
    MATERIALS AT HIGH TEMPERATURES, 2000, 17 (02) : 243 - 246
12345