The influence of CNTs on the microstructure and ductility of CNT/Mg composites

被引：56
|
作者：
Han, G. Q. [1 ]
Shen, J. H. [2 ]
Ye, X. X. [2 ]
Chen, B. [2 ]
Imai, H. [2 ]
Kondoh, K. [2 ]
Du, W. B. [1 ]
机构：
[1] Beijing Univ Technol, Coll Mat Sci & Engn, Beijing, Peoples R China
[2] Osaka Univ, Joining & Welding Res Inst, Suita, Osaka 565, Japan
来源：
MATERIALS LETTERS | 2016年 / 181卷
关键词：
CNT/Mg composites; Microstructure; Twinning; Ductility; METAL-MATRIX COMPOSITES; CARBON NANOTUBES; GRAPHENE NANOPLATELETS; MECHANICAL-PROPERTIES; MAGNESIUM ALLOY; TENSILE; STRENGTH;
D O I：
10.1016/j.matlet.2016.06.021
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Powder metallurgy magnesium (Mg) composites reinforced with multi-walled carbon nanotubes (MWCNTs) were developed by an effective three-step process. CNT5 were uniformly dispersed on the Mg powders surface without damaged structure. A large amount of twins appeared in the as-extruded CNT/Mg composites, and the basal texture was weakened comparing to as-extruded pure Mg, which played a positive role in the ambient tensile deformation. The elongation to failure of Mg composite with 0.08 wt% CNT5 has increased greatly by 32%. (C) 2016 Elsevier B.V. All rights reserved.
引用
收藏
页码：300 / 304
页数：5
相关论文
共 50 条
  • [41] The Influence of Si and Mg Content on the Microstructure, Tensile Ductility, and Stretch Formability of 6xxx Alloys
    Zhong, Hao
    Rometsch, Paul A.
    Estrin, Yuri
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2013, 44A (08): : 3970 - 3983
  • [42] Effects of the addition of CNTs and Al alloying on the microstructure and properties of Cu-(Al)/CNTs composites
    Lu, Qiang
    Ni, Song
    Guo, Baisong
    Gu, Ji
    Adeli, Mandana
    Song, Min
    DIAMOND AND RELATED MATERIALS, 2021, 120
  • [43] Micro-Stress transfer of CNT and CNT-interface in CNT reinforced Mg-matrix composites
    Li Qing
    Yu Chao
    MATERIALS AND DESIGN, PTS 1-3, 2011, 284-286 : 851 - 856
  • [44] The microstructure, mechanical and dielectric properties of CNTs/mullite ceramics composites
    Wang, Jing
    Kou, Huamin
    Pan, Yubai
    Guo, Jingkun
    COMPOSITE MATERIALS IV, 2006, 313 : 145 - 150
  • [45] Enhanced mechanical properties of CNTs/Mg biomimetic laminated composites
    Song, Zhengxiang
    Hu, Xiaoshi
    Xiang, Yeyang
    Wu, Kun
    Wang, Xiaojun
    Materials Science and Engineering: A, 2021, 802
  • [46] The microstructure, mechanical and dielectric properties of CNTs/mullite ceramics composites
    Wang, Jing
    Kou, Huamin
    Pan, Yubai
    Guo, Jingkun
    Key Engineering Materials, 2006, 313 : 145 - 150
  • [47] Processing, microstructure and mechanical properties of a novel mg matrix composites reinforced with urchin-like CNTs@SiCp
    Ding, Chao
    Shi, Hailong
    Wu, Kun
    Wang, Xiaojun
    Gan, Weimin
    Hu, Xiaoshi
    Xu, Chao
    DIAMOND AND RELATED MATERIALS, 2020, 109
  • [48] Effect of interfacial interactions of functionalized carbon nanotubes (CNTs) in epoxy-CNT composites
    Roy, Sagar
    Petrova, Roumiana
    Mitra, Somenath
    ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 2016, 252
  • [49] Influence of processing parameters on the microstructure of (AIN+Mg2Si)/Mg metal matrix composites
    Zhang, Congfa
    Cao, Wei
    Fan, Tongxiang
    Zhang, Di
    COMPOSITE MATERIALS V, 2007, 351 : 214 - +
  • [50] CONTROL OF DISPERSION AND AGGLOMERATION OF CNTS FOR THEIR NETWORKING MECHANICAL AND ELECTRICAL PROPERTIES OF CNT/ALUMINA COMPOSITES
    Matsuoka, Mitsuaki
    Tatami, Junichi
    Wakihara, Toru
    INNOVATIVE PROCESSING AND MANUFACTURING OF ADVANCED CERAMICS AND COMPOSITES II, 2014, 243 : 117 - 120
12345